ISTQB-CTFL Exam Dumps - ISTQB Foundation Level Questions and Answers

In the context of software testing, the ISTQB Certified Tester Foundation Level (CTFL) v4.0 differentiates between "validation" and "verification" based on their respective focuses in the software development lifecycle. Verification is the process of evaluating a system or component to determine whether the products of a given development phase satisfy the conditions imposed at the start of that phase. In simpler terms, verification is about checking the product against the specified requirements to ensure it was built correctly. Validation, on the other hand, involves evaluating a system or component during or at the end of the development process to determine whether it meets specified requirements for its intended use. This means validation is about ensuring the product fulfills its intended use and meets the needs of the user.

Checklist-based testing is a technique where testers use pre-determined checklists to ensure that important aspects of a work product are evaluated. Over time, these checklists should be reviewed and updated periodically to maintain their effectiveness in detecting defects. As systems evolve, outdated checklists may miss new types of defects, thus diminishing their usefulness. Therefore, statement D is true according to the ISTQB CTFL syllabus​​.

The statement that "static testing increases development costs and time" is NOT correct. Static testing actually helps to reduce development costs and time by identifying defects early in the development process before dynamic testing is performed. Early detection of defects reduces the cost and effort required to fix them and prevents the propagation of defects to later stages, thus reducing overall testing and development costs.

Test-driven development is not an example of a typical generic skill required for testing, but rather an example of a specific technical skill or a development practice that may or may not be relevant for testing, depending on the context and the objectives of the testing activities. Test-driven development is an approach to software development and testing, in which the developers write automated unit tests before writing the source code, and then refactor the code until the tests pass. Test-driven development can help to improve the quality, the design, and the maintainability of the code, as well as to provide fast feedback and guidance for the developers. However, test-driven development is not a skill that is generally expected or needed for testers, especially for testers who are not involved in unit testing or who do not have access to the source code. The other options are examples of typical generic skills required for testing, which are skills that are applicable and beneficial for testing in any context or situation, regardless of the specific testing techniques, tools, or methods used. The typical generic skills required for testing include:

Be able to use test management tools and defect tracking tools: These are tools that help testers to plan, organize, monitor, and control the testing activities and resources, as well as to record, track, analyze, and resolve the defects detected during testing. These tools can improve the efficiency, the effectiveness, and the communication of the testing process, as well as to provide traceability, metrics, and reports for the testing outcomes.

Be able to communicate defects and failures to developers as objectively as possible: This is a skill that involves the ability to report and describe the defects and failures found during testing in a clear, concise, accurate, and unbiased manner, using relevant information, evidence, and terminology, without making assumptions, judgments, or accusations. This skill can facilitate the collaboration, the understanding, and the resolution of the defects and failures between the testers and the developers, as well as to prevent conflicts, misunderstandings, or blame games.

Possess the necessary social skills that support effective teamwork: These are skills that involve the ability to interact, cooperate, and coordinate with other people involved in or affected by the testing activities, such as the test manager, the test team, the project manager, the developers, the customers, the users, etc. These skills can include communication, negotiation, leadership, motivation, feedback, conflict resolution, etc. These skills can enhance the quality, the productivity, and the satisfaction of the testing process, as well as to foster a positive and constructive testing culture. References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.1.1, Testing and the Software Development Lifecycle

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.1.2, Testing and Quality

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.2.1, Testing Principles

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.2.2, Testing Policies, Strategies, and Test Approaches

ISTQB® Glossary of Testing Terms v4.0, Test-driven Development, Test Management Tool, Defect Tracking Tool, Defect Report, Failure, Social Skill2

The minimum number of test cases needed to cover every unique sequence of up to 3 states/2 transitions starting in the “Start” state and ending in the “End” state is 4. This is because there are 4 unique sequences of up to 3 states/2 transitions starting in the “Start” state and ending in the “End” state:

Start -> Bet -> End

Start -> Deal -> End

Start -> 1st Deal -> End

Start -> 2nd Deal -> End References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents.

 A test oracle is a mechanism or principle that can be used to determine whether the observed behavior or output of a system under test is correct or not1. A test oracle can be based on various sources of expected results, such as specifications, user expectations, previous versions, comparable systems, etc2. References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 Syllabus, Section 1.2.1, Page 91; ISTQB Glossary of Testing Terms, Version 4.0, Page 332.

This answer is correct because product risks are risks that affect the quality of the software product, such as defects, failures, or non-compliance with requirements or standards. Project risks are risks that affect the project’s schedule, budget, resources, or scope, such as delays, cost overruns, skill gaps, or scope changes. In this case, [I] and [IV] are product risks, as they relate to the accessibility and security of the software product, which are quality attributes. [II] and [III] are project risks, as they relate to the delivery time and the test automation skills of the test team, which are project factors. References: ISTQB Glossary of Testing Terms v4.0, ISTQB Foundation Level Syllabus v4.0, Section 2.1.1.1

According to the ISTQB CTFL syllabus, a defect is a deviation from the expected result which in this scenario is the incorrect discount applied to the customers. The root cause, as per the ISTQB definition, is the originating cause of a defect, which in this case is the incorrect requirement stating 50% instead of 5%. Therefore, the incorrect requirement is the root cause and the customer receiving the wrong discount is the effect of this root cause.

Boundary Value Analysis (BVA) is a software testing technique in which tests are designed to include values at the boundaries. The concept is to focus on the boundaries since errors tend to occur at the edges of input ranges rather than in the middle.

Given the problem statement:

Up to $100.00 = 2%

$100.01 to $500.00 = 4%

$500.01 to $1,000.00 = 5%

Above $1,000.00 = 7%

Two-point boundary value analysis means testing the two boundaries of each range.

For each range:

The boundaries for "Up to $100.00" would be $100.00 and $100.01.

The boundaries for "$100.01 to $500.00" would be $100.00 and $500.00.

The boundaries for "$500.01 to $1,000.00" would be $500.00 and $1,000.00.

The boundaries for "Above $1,000.00" would be $1,000.00 and $1,000.01.

Now, let's examine the options:

A. $5.00, $100.00, $499.99, $1,000.00, $1,000.01

Missing $100.01 and $500.01.

B. $100.00, $100.01, $100.02, $500.00, $999.99

Covers $100.00, $100.01, $500.00, $1000.00, and $1000.01.

C. $100.00, $500.00, $1,000.00, $1,000.01

Missing $100.01 and $500.01.

D. $5.00, $100.00, $500.00, $1,000.01

Missing $100.01 and $500.01.

Given the options, B provides the highest boundary coverage​ (ISTQB not-for-profit association)​​ (Udemy)​.