SK0-005 Exam Dumps - CompTIA Server+ Questions and Answers

QSFP+ is a type of connector that should be used to connect a server to a switch that uses 40G network connectivity. QSFP+ (Quad Small Form-factor Pluggable Plus) is a compact, hot-pluggable transceiver module that supports data rates up to 40 Gbps. QSFP+ modules can be used for various network protocols and media types, such as Ethernet, Fibre Channel, InfiniBand, or optical fiber. QSFP+ modules have a 38-pin edge connector and can be inserted into a QSFP+ port on a switch or a server. SFP+ (Small Form-factor Pluggable Plus) is a type of connector that supports data rates up to 10 Gbps, but not 40 Gbps. SFP+ modules have a 20-pin edge connector and can be inserted into an SFP+ port on a switch or a server. GBIC (Gigabit Interface Converter) is an older type of connector that supports data rates up to 1 Gbps, but not 40 Gbps. GBIC modules have an SC duplex connector and can be inserted into a GBIC port on a switch or a server. SFP (Small Form-factor Pluggable) is another older type of connector that supports data rates up to 1 Gbps or 4 Gbps, but not 40 Gbps. SFP modules have an LC duplex connector and can be inserted into an SFP port on a switch or a server. References: https://www.howtogeek.com/190014/virtualization-basics-understanding-techniques-and-fundamentals/ https://www.howtogeek.com/428483/what-is-end-to-end-encryption-and-why-does-it-matter/ https://www.howtogeek.com/443611/how-to-encrypt-your-macs-system-drive-removable-devices-and-individual-files/

Deploying a virtual machine from a template creates a virtual machine that is a copy of the template. The new virtual machine has the virtual hardware, installed software, and other properties that are configured for the template.

This is the best action to perform before applying patches to one of the hosts in a high availability cluster. A high availability cluster is a group of hosts thatact like a single system and provide continuous uptime. A high availability cluster is often used for load balancing, backup, and failover purposes. Failover is a process of transferring workloads from one host to another in case of a failure or maintenance. By failing over all VMs (Virtual Machines) from the host that needs to be patched to another host in the cluster, the technician can ensure that there is no downtime or data loss during the patching process. Disabling the heartbeat network is not a good action to perform, as this would disrupt the communication and synchronization between the hosts in the cluster. Fallback cluster services is not a valid term, but it may refer to restoring cluster services after a failover, which is not relevant before applying patches. Setting the cluster to active-active is not a good action to perform, as this would increase the load on both hosts and reduce redundancy. References: https://www.howtogeek.com/190014/virtualization-basics-understanding-techniques-and-fundamentals/https://www.howtogeek.com/428483/what-is-end-to-end-encryption-and-why-does-it-matter/

The administrator should only allow secure traffic and DNS inquiries on the server, which means that only ports 22, 53, and 443 should be open. Port 22 is used for SSH (Secure Shell), which is a protocol that allows secure remote login and command execution over a network connection using a command-line interface (CLI). Port 53 is used for DNS (Domain Name System), which is a service that translates domain names into IP addresses and vice versa. Port 443 is used for HTTPS (Hypertext Transfer Protocol Secure), which is a secure version of HTTP that encrypts the data exchanged between a web browser and a web server.

The server administrator needs to adhere to the Service Level Agreement (SLA) when responding to tickets within a certain amount of time. An SLA is a contract between a service provider and a customer that defines the quality, availability, and responsibilities of the service. An SLA may specify the response time for tickets, as well as other metrics such as uptime, performance, security, and backup frequency.Reference: https://www.ibm.com/cloud/learn/service-level-agreements

If a server has three hard drives configured in a RAID 5 array, it means that the data is striped across all three drives with parity information. RAID 5 can tolerate one drive failure without losing data, but not two or more. If there are multiple failed hard drives, the RAID 5 array will become corrupted and the OS will not load. The other options are not likely to cause the issue, as the server passes POST, the CPU and RAM are seated correctly, the BIOS settings are correct, and the OS loads from a bootable USB drive. RAID 5 does not require four drives, it can work with three or more.References:https://www.technewstoday.com/what-is-a-raid-5/

A warm site is a type of disaster recovery site that has a target storage array that receives replication traffic and servers that are only powered on in the event of a disaster. A warm site is a compromise between a hot site and a cold site. A warm site has some equipment and data ready, but requires some configuration and restoration before resuming operations. A warm site is usually located in a different geographic area than the primary site and has redundant power, cooling, network, and security systems. A warm site is suitable for organizations that can tolerate some downtime and data loss in case of a disaster. A cloud site is a type of disaster recovery site that uses cloud-based resources and platforms to store backups and restore data and applications after a disaster. A cold site is a type of disaster recovery site that has only basic infrastructure and space available, but requires significant setup and installation before resuming operations. A hot site is a type of disaster recovery site that has all the equipment and data ready to resume operations as soon as possible after a disaster. References: https://www.techopedia.com/definition/11172/hot-site https://www.techopedia.com/definition/11173/warm-site https://www.techopedia.com/definition/11174/cold-sitehttps://www.techopedia.com/definition/29836/cloud-recovery

A mantrap is a security device that consists of a small space with two sets of interlocking doors, such that the first set of doors must close before the second one opens. A mantrap can be used to control access to a data center by verifying the identity and weight of the person entering. A bollard is a sturdy post that prevents vehicles from entering a restricted area. Geofencing is a technology that uses GPS or RFID to create a virtual boundary around a location and trigger an action when a device crosses it. RFID is a technology that uses radio waves to identify and track objects or people. References:

https://www.techopedia.com/definition/16293/mantrap

https://www.techopedia.com/definition/1437/bollard

https://www.techopedia.com/definition/23961/geofencing

https://www.techopedia.com/definition/506/radio-frequency-identification-rfid

The most likely reasons why the technician is unable to access a server’s package repository internally or externally are that the external firewall is blocking access and that the default gateway is incorrect. A package repository is a source of software packages that can be installed or updated on a server using a package manager tool. A package repository can be accessed over a network using a URL or an IP address. However, if there are any network issues or misconfigurations, the access to the package repository can be blocked or failed. An external firewall is a device or software that controls the incoming and outgoing network traffic based on predefined rules or policies. An external firewall can block access to a package repository if it does not allow traffic on certain ports or protocols that are used by the package manager tool. A default gateway is a device or address that routes network traffic from one network to another network. A default gateway can be incorrect if it does not match the actual device or address that connects the server’s network to other networks, such as the internet. An incorrect default gateway can prevent the server from reaching the package repository over other networks. QUESTION NO: 63 Correct Answer: A Explanation: The RAID level that provides the highest possible capacity for a storage array is RAID 0. RAID 0 is a type of RAID level that provides performance enhancement by using striping. Striping means dividing data into blocks and distributing them across multiple disks to increase speed and capacity. RAID 0 does not provide any fault tolerance or redundancy, as it does not use any parity or mirroring techniques. RAID 0 uses all of the available disk space for data storage, without losing any space for overhead. Therefore, RAID 0 provides the highest possible capacity for a storage array, but also has the highest risk of data loss.

The RAID level that provides the highest possible capacity for a storage array is RAID 0. RAID 0 is a type of RAID level that provides performance enhancement by using striping. Striping means dividing data into blocks and distributing them across multiple disks to increase speed and capacity. RAID 0 does not provide any fault tolerance or redundancy, as it does not use any parity or mirroring techniques. RAID 0 uses all of the available disk space for data storage, without losing any space for overhead. Therefore, RAID 0 provides the highest possible capacity for a storage array, but also has the highest risk of data loss.