SK0-005 Exam Dumps - CompTIA Server+ Questions and Answers

The first thing that the administrator should check is the network cable. The network cable is a physical medium that connects a server to a switch or other network device. The network cable can affect the speed and quality of the network connection, depending on its type, length, and condition. If the network cable is damaged, faulty, or incompatible, it can cause the server to connect at a lower speed than expected. Therefore, the administrator should check the network cable for any signs of wear, tear, or mismatch, and replace it if necessary.

References: CompTIA Server+ SK0-005 Certification Study Guide, Chapter 2, Lesson 2.1, Objective 2.1

An access control vestibule is a physical security concept that limits personnel access to a restricted area within a data center. It is a small room or hallway that has two doors: one that leads to the outside and one that leads to the restricted area. The doors are controlled by an electronic lock that requires authentication, such as a card reader, biometric scanner, or keypad. Only authorized personnel can enter the vestibule and access the restricted area. References: CompTIA Server+ Certification Exam Objectives, Domain 5.0: Security, Objective 5.1: Given a scenario, apply physical security methods to a server.

The IP address 216.176.128.10 falls within the range of public IP addresses, which are routable over the Internet. Since the company is using a public range of IP addresses internally, this address is suitable for the scenario. In contrast, 10.3.7.27 and 192.168.7.1 are private IP addresses typically used within internal networks and not routable on the public Internet. 127.0.0.1 is known as the loopback address, used by a computer to communicate with itself and not suitable for assigning to devices within a network.

A loop is a programming construct used to repeat a block of code multiple times. In this case, if a function needs to run ten times, a loop (such as a for loop or while loop) would be the appropriate choice.

Loop (Answer A): This allows the function to be executed repeatedly without writing redundant code.

Variable (Option B): A variable is used to store data, but it doesn’t handle repetition.

Comparator (Option C): Comparators are used to compare values, not for repeating code.

Conditional (Option D): Conditionals (if, else) are used for decision-making, not repeating actions multiple times.

CompTIA Server+ Reference:This topic is related to SK0-005 Objective 1.1: Understand basic scripting and automation concepts.

Drive encryption is a form of encryption that best achieves the goal of data-at-rest encryption for all data. Drive encryption encrypts the entire hard drive, including the operating system, applications, and files. This prevents unauthorized access to the data if the drive is lost or stolen. Database, folder, and file encryption are forms of encryption that only encrypt specific data sets, not all data. References: [CompTIA Server+ Certification Exam Objectives], Domain 5.0: Security, Objective 5.3: Given a scenario involving a security threat/vulnerability/risk, implement appropriate mitigation techniques.

The Recovery Point Objective (RPO) refers to the maximum tolerable period in which data might be lost from an IT service due to a major incident. The policy mentioned in the question highlights that data loss exceeding one hour is unacceptable, directly relating to the RPO concept. RPO is critical in disaster recovery and business continuity planning, indicating the age of the files that must be recovered from backup storage for normal operations to resume without significant losses. MTTR (Mean Time To Repair), RTO (Recovery Time Objective), and MTBF (Mean Time Between Failures) are related concepts but do not specifically address the amount of data loss that can be tolerated.

Overprovisioning is a situation where the allocated resources for a virtual machine exceed the available resources of the physical host. In this case, the storage allocated for Server 1 and Server 2 on VM01 is 8TB and 10TB respectively, which adds up to 18TB. However, the storage available on the VM01 host is only 16TB, which means there is a 2TB deficit. This can cause performance issues and errors for the virtual machines.

References:

CompTIA Server+ Certification Exam Objectives1, page 8

Server Management: Server Hardware Installation and Management, Module 2, Lesson 5

The storage type that will yield the fastest database read performance is SSD. SSD (Solid State Drive) is a type of storage device that uses flash memory to store data. SSDs have no moving parts and can access data faster than traditional hard disk drives (HDDs) that use spinning platters and magnetic heads. SSDs are especially suitable for databases that are mainly used for archival lookups, as they can provide faster response times and lower latency for read operations.

References: CompTIA Server+ SK0-005 Certification Study Guide, Chapter 1, Lesson 1.2, Objective 1.2

The step that the server administrator should perform before resolving the issue is to determine the probable causes. This step is part of the troubleshooting process that follows a logical and systematic approach to identify and solve problems with servers and applications. The troubleshooting process consists of several steps, such as:

Identify the problem: Gather information from various sources, such as users, logs, or alerts, to understand the symptoms and scope of the problem.

Establish a theory of probable cause: Analyze the information and formulate one or more possible causes of the problem based on evidence or experience.

Test the theory to determine cause: Perform tests or experiments to verify or eliminate each possible cause until the root cause is found.

Establish a plan of action to resolve the problem and implement the solution: Design and execute a plan to fix the problem using appropriate tools and techniques.

Verify full system functionality and implement preventive measures: Confirm that the problem is resolved and that no other issues arise as a result of the solution. Implement preventive measures to avoid recurrence of the problem or improve performance.

Document findings, actions, and outcomes: Record the details of the problem, its cause, its solution, and its outcome for future reference or knowledge sharing. References: [CompTIA Server+ Certification Exam Objectives], Domain 6.0: Troubleshooting, Objective 6.1: Given a scenario involving server hardware issues (e.g., power supply failure), troubleshoot using appropriate tools.

A link aggregation group (LAG) is a technique that combines multiple physical network interfaces into a single logical interface. This allows for the distribution of traffic across all the interfaces in the group, increasing bandwidth and redundancy. A LAG can use different modes to balance the load, such as address hashing, dynamic, or most recently used algorithm.

References: CompTIA Server+ Study Guide, Chapter 6: Networking, page 239.