SK0-005 Exam Dumps - CompTIA Server+ Questions and Answers

Aggregation is the process of collecting, standardizing, and consolidating log data from multiple sources into a central location. Aggregation makes it easier to search, analyze, and report on log data, as well as to comply with security policies and regulations. By aggregating logs from all servers, regardless of their state, the corporate policy can ensure that no log data is lost or inaccessible in case of a server failure or outage

Port 21 is used for FTP (File Transfer Protocol), which is a protocol that transfers files between servers and clients in cleartext, meaning that anyone can intercept and read the data. To stop this communication, port 21 should be closed on the web server and replaced with a secure protocol, such as SFTP (Secure File Transfer Protocol) or FTPS (File Transfer Protocol Secure), which use encryption to protect the data. Verified References: [FTP vs SFTP vs FTPS]

A firewall is a network device or software that filters and controls the incoming and outgoing traffic based on predefined rules. A firewall can block or allow certain types of packets, ports, protocols, or IP addresses. The output of the ping command shows that the local host is unreachable, which means that there is no network connectivity between the source and the destination. This could be caused by a firewall that is blocking the ICMP (Internet Control Message Protocol) packets that ping uses to test the connectivity. References: https://www.comptia.org/training/resources/exam-objectives/comptia-server-sk0-005-exam-objectives (Objective 2.2)

Disposal is the part of the asset life cycle that can cause the greatest number of issues in relation to PII exposure. PII stands for personally identifiable information, which is any data that can be used to identify a specific individual, such as name, address, phone number, email, social security number, etc. PII exposure is the unauthorized access or disclosure of PII, which can result in identity theft, fraud, or other harms to the individuals whose data is compromised. Disposal is the process of getting rid of an asset that is no longer needed or useful, such as a server, a hard drive, or a mobile device. If the disposal is not done properly, the PII stored on the asset may still be accessible or recoverable by unauthorized parties, such as hackers, thieves, or competitors. Therefore, it is important to follow best practices for secure disposal of assets that contain PII, such as wiping, encrypting, shredding, or physically destroying the data storage media

This is the best description of a synthetic full backup method because it creates a full backup by combining previous incremental backups with the latest backup. An incremental backup copies only the files that have changed since the last backup, while a full backup copies all the files. A synthetic full backup reduces the storage space and network bandwidth required for backups, while also simplifying the restore process by using a single file. References: https://www.veritas.co m/support/en_US/doc/129705091-129705095-0/br731_wxrt-tot_v131910378-129705095

The most likely cause of this failure is that both power supplies were connected to the same power feed, which means that they both lost power when utility power was lost. To prevent this from happening, redundant power supplies should be connected to different power feeds, preferably from different sources, such as a UPS or a generator. Verified References: [Redundant Power Supply Best Practices]

RAID 10 is the RAID level that will yield the best combination of available space and redundancy when configuring a new server for use as a database server with two mirrored drives for the operating system and three drive bays remaining for storage. RAID 10, also known as RAID 1+0, is a RAID configuration that combines disk mirroring and disk striping to protect data. It requires a minimum of four disks and stripes data across mirrored pairs. As long as one disk in each mirrored pair is functional, data can be retrieved. RAID 10 provides high performance, fault tolerance, and fast recovery, but it reduces storage capacity by half. RAID 0 is a RAID configuration that splits data across two or more drives without parity or redundancy. It improves performance but offers no fault tolerance. If one drive fails in RAID 0, all data is lost and the system cannot boot. RAID 1 is a RAID configuration that duplicates data across two or more drives. It provides fault tolerance and improves read performance, but reduces storage capacity by half. If one drive fails in RAID 1, the other drive can continue to operate without data loss or system downtime. RAID 5 is a RAID configuration that stripes data across three or more drives with parity information. It provides fault tolerance and improves performance, but reduces storage capacity by one drive’s worth of space. RAID 5 can tolerate one drive failure without data loss, but not two or more. References: https://www.howtogeek.com/199068/how-to-upgrade-your-existin g-hard-drive-in-under-an-hour/ https://www.howtogeek.com/202794/wh at-is-the-difference-between-127.0.0.1-and-0.0.0.0/

chmod is a command-line tool that changes the permissions of files and directories in Linux and Unix systems. chmod go-rwx means to remove read, write, and execute permissions for group and other users from a file or directory. This can ensure only the root user can modify and execute the script, since root user has full access to all files and directories regardless of their permissions. References: https://linux.die.net/man/1/chmod

Fibre Channel is a connectivity option that can transmit at 16Gb over an optical connection for SAN-based shared storage. Fibre Channel is a high-speed network technology that provides reliable and secure data transfer between servers and storage devices. Fibre Channel uses optical fiber cables to connect devices and supports various topologies and protocols. FCoE is another connectivity option that uses Fibre Channel over Ethernet, which encapsulates Fibre Channel frames into Ethernet packets. FCoE can also transmit at 16Gb over an optical connection, but it requires a converged network adapter (CNA) and a lossless Ethernet network. iSCSI is another connectivity option that uses SCSI commands over IP networks, which can use either copper or optical cables. iSCSI can transmit at 10Gb or 40Gb over an optical connection, but it has higher latency and lower performance than Fibre Channel. eSATA is another connectivity option that uses SATA commands over external cables, which are usually copper. eSATA can transmit at 6Gb over a copper connection, but it has limited cable length and device support compared to Fibre Channel. References:

https://www.ibm.com/topics/storage-area-network

https://www.techopedia.com/definition/1369/fibre-channel-fc

https://www.techopedia.com/definition/1368/fibre-channel-over-ethernet-fcoe

https://www.techopedia.com/definition/1367/internet-small-computer-system-interface-iscsi

https://www.techopedia.com/definition/1366/external-serial-advanced-technology-attachment-esata

Cable management is the process of organizing, securing, and labeling cables in a server rack or cabinet. Cable management can help improve airflow and cooling, reduce clutter and confusion, prevent damage and interference, and enhance safety and aesthetics123. Cable management can be achieved by using various tools and accessories, such as cable trays, ties, hooks, clips, labels, ducts, and organizers12.