SK0-005 Exam Dumps - CompTIA Server+ Questions and Answers

Comprehensive and Detailed Explanation:

Hyper-V Replica is a feature in Microsoft's Hyper-V virtualization platform that enables asynchronous replication of virtual machines to a secondary location. This technology is primarily designed for disaster recovery scenarios, allowing organizations to restore services in the event of site failures.​

The server administrator should close port 3389 and rerun the scan. Port 3389 is used for Remote Desktop Protocol (RDP), which allows remote access and control of a server. RDP is vulnerable to brute-force attacks, credential theft, and malware infection. Closing port 3389 can prevent unauthorized access and improve the security of the server. The other ports are not as risky as port 3389 and can be left open for legitimate purposes. References: CompTIA Server+ Certification Exam Objectives, Domain 5.0: Security, Objective 5.4: Given a scenario, implement proper environmental controls and techniques.

Uplink redundancy is a method used to ensure that if one physical network interface card (NIC) fails, the network connectivity for the virtual machines (VMs) does not go down. This is typically achieved by configuring multiple NICs to connect to a single virtual switch (vSwitch) and setting up NIC teaming or bonding. The vSwitch manages the internal network traffic between the VMs and the outside network by using the physical NICs assigned to it. By configuring the vSwitch with multiple NICs, you can create redundancy, so if one NIC fails, the other NICs can take over the traffic, ensuring continuous network connectivity.

When troubleshooting memory-related errors, it's essential to consider several key factors:

Memory Compatibility: Memory modules must match the specifications supported by the motherboard (e.g., DDR4 vs. DDR5, ECC vs. non-ECC, buffered vs. unbuffered). Using incompatible RAM can cause boot failures, crashes, or instability.

Memory Speed: While RAM speed mismatches can affect performance, they typically do not cause a server to fail to power on. Most systems automatically adjust to the slowest module.

Memory Slots: Incorrect installation or damaged slots could be an issue, but the priority is to check compatibility first.

Boot Order: This setting controls the sequence in which devices boot the OS, which is unrelated to memory-related power issues.

Since the server remains unstable after adding memory, the most likely issue is an incompatibility with the motherboard. The first step is to verify whether the newly installed RAM meets the server’s hardware requirements.

The first thing that the administrator should check is the network cable. The network cable is a physical medium that connects a server to a switch or other network device. The network cable can affect the speed and quality of the network connection, depending on its type, length, and condition. If the network cable is damaged, faulty, or incompatible, it can cause the server to connect at a lower speed than expected. Therefore, the administrator should check the network cable for any signs of wear, tear, or mismatch, and replace it if necessary.

P2V (Physical to Virtual)refers to converting a physical server into a virtual machine, which can then be deployed to a remote cloud environment. This is the best method for duplicating a physical server to a virtual environment for disaster recovery.

P2V (Answer B):This is the process of converting a physical server to a virtual machine for migration to the cloud.

V2V (Option A):Refers to virtual-to-virtual migration, which is not applicable in this case.

V2P (Option C):Refers to converting a virtual machine back to physical, which is not needed here.

P2P (Option D):Physical-to-physical migration is not relevant for cloud-based disaster recovery.

CompTIA Server+ Reference:This topic relates toSK0-005 Objective 1.3: Explain virtualization concepts.

Link aggregation is the best option to implement on the new server to ensure the least amount of network downtime but a good amount of network speed. Link aggregation is a technique of combining multiple physical network interfaces into one logical interface to increase bandwidth, redundancy, and load balancing. Link aggregation can improve the performance and availability of the server by allowing it to use more than one network path for data transmission and failover in case of link failure. Link aggregation can be implemented using various protocols, such as IEEE 802.3ad (LACP), Cisco EtherChannel, or Linux bonding. References: [CompTIA Server+ Certification Exam Objectives], Domain 4.0: Networking, Objective 4.1: Given a scenario, configure network settings for servers.

RAID 10 is the best option to deploy a database server that provides the highest performance with fault tolerance. RAID 10 is a type of RAID level that combines RAID 1 (mirroring) and RAID 0 (striping) to create an array of mirrored stripes. RAID 10 offers high performance by distributing data across multiple disks in parallel (striping), which improves read/write speed and I/O operations. RAID 10 also offers fault tolerance by duplicating data across two or more disks in each stripe (mirroring), which provides redundancy and data protection in case of disk failure. RAID 10 requires at least four disks to implement and has a high storage overhead, as half of the disk space is used for mirroring. References: [CompTIA Server+ Certification Exam Objectives]