On a BGP/MPLS IP VPN network, which of the following are carried when a PE advertises VPNv4 routes?
On the network shown in the figure, the DHCP server function is enabled on GEO/0/0 of R2, and the address pool is an interface address pool. When GEO/0/0 and GEO/0/1 of R1 function as DHCP clients, only one interface can obtain an IP address by default.
As shown in the figure, MPLS/BGP IPVPN is deployed on the network. The MP-BGP neighbor relationship is established between PE1 and PE2 through the LoopbackD interface. After the configuration is complete, it is found that CE1 and CE2 cannot learn routes from each other. Run the command to check the error on PE2. The neighbor information is shown in the figure, what is the most likely cause of the problem?
[According to this picture, Peimen can judge?
cR3>display ipv6 routing-table protocol isis
An administrator runs the display mpls Isp command to view LSPs on a device. The command output is shown in the figure. Which of the following statements are true?
When configuring the DHCP Relay function on the device, the VLAN ANIF interface of the relay connection client must be bound with a DHCP server group, and the IP address of the proxy DHCP server must be configured in the bound DHCP server group.
Deploying port isolation technology in Ethernet can realize Layer 2 intercommunication and Layer 3 isolation, making networking more flexible.
A,correct
B,mistake
After the cutover is completeD. it is generally necessary to check the following items?
Compared with the OSPFv2 packet header, which fields are added in the OSPFv3 packet header?
TESTED 23 Feb 2025
