Vce 350-601 Questions Latest

The statement that applies to a Cisco Nexus 5600 Series switch when performing a rollback is that errors are skipped when an atomic rollback type is triggered. An atomic rollback is a type of rollback that implements the checkpoint configuration only if no errors occur during the process. If any errors are encountered, the rollback is aborted and the running configuration is restored to its previous state. This ensures that the switch does not end up in a partially configured or inconsistent state. The other statements are not true because:

• A user who is assigned to the network-operator user role cannot perform a rollback. The network-operator user role has read-only access to the switch and cannot modify the configuration. To perform a rollback, the user must have the network-admin or vdc-admin user role.
• The configuration rollback functionality is not disabled when FCoE is enabled. The rollback feature is supported on all Cisco Nexus 5600 Series switches regardless of the FCoE configuration. However, some FCoE-related commands may not be rolled back due to dependencies or conflicts with other features.
• A system checkpoint is not generated automatically when the running configuration is saved to NVRAM. A system checkpoint is a predefined checkpoint that contains the last saved configuration of the switch. A system checkpoint is created or updated only when the user explicitly saves the running configuration to the startup configuration using the copy running-config startup-config command or its alias, copy run start. References: For more details on how to configure and use the rollback feature on a Cisco Nexus 5600 Series switch, please refer to the following resources:
• Configuring Rollback
• Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
• Cisco Nexus 5600 Series NX-OS System Management Command Reference

To configure multiple EPGs on a single access port in a large Cisco ACI fabric without using VMM integration, the EPGs must be linked to the correct physical domain (Option B) and configured as static ports (Option E). The physical domain is associated with VLAN namespaces and determines the VLAN encapsulation at the interface level. The static ports are used to manually assign the EPGs to the access port. The other options are not required for this configuration. A contract is used to define the communication policy between EPGs, but it is not necessary to create one for this scenario. The EPGs do not link directly to the AAEP, but rather to the interface policy group that is associated with the AAEP. The bridge domains do not need to be configured in legacy mode, which is a mode that allows communication with non-ACI networks. References:

• Cisco Application Centric Infrastructure Fundamentals, Release 4.x - Endpoint Groups (EPGs) [Cisco Application Centric Infrastructure], Endpoint Groups (EPGs), Physical Domain
• Cisco Application Centric Infrastructure Fundamentals, Release 4.x - Endpoint Groups (EPGs) [Cisco Application Centric Infrastructure], Endpoint Groups (EPGs), Static Ports
• Cisco Application Centric Infrastructure Fundamentals, Release 4.x - Endpoint Groups (EPGs) [Cisco Application Centric Infrastructure], Endpoint Groups (EPGs), Contracts
• Cisco Application Centric Infrastructure Fundamentals, Release 4.x - Endpoint Groups (EPGs) [Cisco Application Centric Infrastructure], Endpoint Groups (EPGs), Attachable Access Entity Profile
• Cisco Application Centric Infrastructure Fundamentals, Release 4.x - Bridge Domains [Cisco Application Centric Infrastructure], Bridge Domains, Legacy Mode

 Option C is the correct configuration to apply a power redundancy policy on a Cisco UCS C-Series Rack Server that supports two power sources. The power redundancy policy determines how the server uses the available power supplies to optimize power usage. The grid option means that the server uses power from both power supplies simultaneously. If one power supply fails, the server continues to operate with the remaining power supply. The other options are not suitable for this requirement. The n+1 option means that the server uses one fewer power supply than the number of power supplies that are installed. If a power supply fails, the server uses the extra power supply. The non-redundant option means that the server uses only one power supply, regardless of the number of power supplies that are installed. If the power supply fails, the server shuts down. The ps-redundant option means that the server uses power from the most efficient power supply. If the power supply fails, the server switches to another power supply. References:

• Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 4.0 - Configuring Server Power [Cisco Integrated Management Controller], Configuring Server Power, Configuring the Power Policy
• Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 4.0 - Configuring Server Power [Cisco Integrated Management Controller], Configuring Server Power, Power Redundancy Modes

When configuring the connection between a Cisco MDS 9700 Series Multilayer Director and a Cisco Nexus 5672UP switch, it’s important to consider the following:

• Ensure compatibility: Verify that both devices are running compatible NX-OS versions to ensure they can communicate properly.
• Configure interfaces: Set up the interfaces on both devices with the appropriate type (E, F, or TE), speed, and other relevant settings.
• Establish connectivity: Use the show interface command to confirm that the interfaces are up and the show flogi database command to verify that the Fibre Channel login has been successful.
• Zoning configuration: Configure zoning on the MDS 9700 to control access between devices connected to the fabric.
• VSAN setup: Ensure that the Virtual Storage Area Network (VSAN) is correctly configured and that both switches are part of the same VSAN if required for the topology.

References:

• Cisco MDS 9700 Series Multilayer Directors documentation1.
• Cisco Nexus 5672UP switch documentation