Free Access Cisco 350-601 New Release

The Cisco UCS firmware Auto Sync Server policy includes several configuration settings that determine how and when firmware on servers is synchronized. The two available settings from the options provided are ‘User Acknowledge’ and ‘No Action’. ‘User Acknowledge’ requires an administrator to manually acknowledge firmware upgrades in the Pending Activities dialog box before they are applied. ‘No Action’ means no firmware upgrade is initiated on the server. These settings allow administrators to control the firmware synchronization process according to their operational policies and procedures.

References := Using Firmware Automatic Synchronization Server Policy - Cisco, Cisco UCS B-Series CLI Firmware Management Guide, Release 2.2

 To configure a Fibre Channel device alias named TEST for a device attached to port fc1/9 on a Cisco Nexus Series Switch, the correct command set is found in Option A. The commands should be entered in configuration mode, starting with accessing the device-alias database, creating the device-alias named TEST with the specified pwwn, and committing the changes to the database123.

References := The process for configuring a Fibre Channel device alias on a Cisco Nexus Series Switch is detailed in the Cisco Nexus 9000 Series NX-OS SAN Switching Configuration Guide and other Cisco documentation related to SAN switching and device aliases

To prevent loops from occurring accidentally on a switch interface designated for host connectivity, the best practice is to enable Spanning Tree Protocol (STP) protections. Option A, which includes the command spanning-tree guard loop, is the correct configuration to apply. This command enables Loop Guard, a feature that prevents alternate or root ports from becoming designated ports due to a failure that leads to a unidirectional link. If a port stops receiving Bridge Protocol Data Units (BPDUs), Loop Guard puts the port into an STP loop-inconsistent state, effectively preventing potential loops.

References := This information is aligned with the best practices for loop prevention as described in Cisco’s Data Center Core Technologies materials. For further details, refer to the study guide or source documents related to STP and its security features within the Cisco Data Center Core Technologies curriculum.

UCS-A# scope security

UCS-A /security # scope radius

UCS-A /security/radius # create server radiusserv7

UCS-A /security/radius/server* # set key

UCS-A /security/radius/server* # commit-buffer