CTFL_Syll2018 Exam Dumps - iSQI CTFL2018 Questions and Answers

The fundamental test process activity where the sufficiency of testing and resulting information are assessed is Evaluating exit criteria and reporting. This activity involves checking whether the test objectives have been met and whether there are any unresolved issues or risks that could affect the release or deployment decision. This activity also involves preparing and communicating a test summary report that summarizes the test activities and results and provides recommendations and feedback for improvement. You can find more information about Evaluating exit criteria and reporting in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 3, Section 3.5.

To achieve 100% statement coverage, you need to execute every statement in the code at least once. In this case, you need two test cases: one where condition A is true and one where condition A is false. This way, you can cover both the DO B statement and the END IF statement. You can find more information about statement coverage in A Study Guide to the ISTQB® Foundation Level 2018 Syllabus, Chapter 4, Section 4.31.

Testing tools can be used by both developers and testers for different purposes and at different stages of the software development life cycle. For example, developers can use tools such as unit testing frameworks, code coverage tools, debugging tools, static analysis tools, etc., to improve the quality of their code and find defects early. Testers can use tools such as test management tools, test design tools, test execution tools, test data preparation tools, performance testing tools, etc., to support their testing activities and increase their efficiency and effectiveness. The use of testing tools does not necessarily imply test automation, which is the use of software to perform or support test activities that would otherwise require manual intervention. Test automation is a complex and costly process that requires careful planning, design, implementation, maintenance, and evaluation. The use of testing tools also does not change the role of the test team, which is still responsible for defining the test strategy, designing the test cases, analyzing the test results, reporting the defects, etc. You can find more information about testing tools and test automation in A Study Guide to the ISTQB® Foundation Level 2018 Syllabus, Chapter 61.

The term ‘Pesticide paradox’ refers to the phenomenon where the effectiveness of test cases that are repeated and focused on the same scenarios decreases over time because they tend to find the same defects or no defects at all. This is because the system under test becomes more resistant or immune to the existing test cases, just like pests become more resistant or immune to pesticides over time. To overcome the pesticide paradox, test cases should be regularly reviewed and updated to cover new or changed requirements, scenarios, risks, or defects. Test cases should also be designed to cover different aspects and perspectives of the system under test, such as functionality, usability, performance, security, etc. You can find more information about the pesticide paradox in A Study Guide to the ISTQB® Foundation Level 2018 Syllabus, Chapter 4, Section 4.11.

The V-model is a development life cycle model that shows the relationship between each phase of development and its corresponding phase of testing. In this model, each level of testing (unit testing, integration testing, system testing, acceptance testing) has a corresponding level of development (component design, component integration, system design, requirements analysis). The model also shows that testing activities should start as early as possible in the development process and that each level of testing should be planned and designed in parallel with its corresponding level of development. Therefore, one of the roles of a tester in a software company that adopts the V-model is to coordinate the test strategy with the project managers who are responsible for planning and managing each phase of development. This role involves defining the scope, objectives, approach, resources, schedule, risks, and deliverables of each level of testing in alignment with the development plan and the project requirements. You can find more information about the V-model and test planning in Software Testing Foundations: A Study Guide for the Certified Tester Exam, Chapter 22.

Risk-based testing is an approach to testing that prioritizes and focuses on testing activities based on the level of risk associated with each feature or function of the system under test. Risk-based testing aims to optimize the use of time, resources, and techniques for testing by identifying and addressing the most critical and likely sources of failure or harm in the system under test. Some examples of typical risk-based testing activities are:

• Brainstorming sessions are held with a wide variety of stakeholders to identify possible failures in the system: This activity is part of the risk identification process, which involves gathering information and opinions from different perspectives and sources to discover potential risks in the system under test.
• Tests are prioritized to ensure that those associated with critical parts of the system are executed earlier: This activity is part of the risk analysis and evaluation process, which involves assessing the probability and impact of each risk and ranking them according to their severity and importance.
• The focus of testing is shifted to an area in the system where tests find more defects than expected: This activity is part of the risk mitigation and monitoring process, which involves taking actions to reduce or eliminate the risks and tracking their status and progress.

The evaluation of a risk-management tool to decide which tool to use for future projects is not an example of a typical risk-based testing activity because it is not directly related to testing the system under test based on its risks. Rather, it is an example of a tool selection or evaluation activity, which involves comparing and choosing a tool that can support or enhance the testing process based on criteria such as functionality, usability, reliability, compatibility, cost, etc. You can find more information about risk-based testing in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 3, Section 3.4.

The diagram lists various types of operating systems (LNX, W2K, WSP), databases (ORA, MSQ, SQL), and application servers (JBS, WSP) supported by the application under test. To test all possible combinations of these types, we need to multiply the number of options in each category. In this case, we have:

• 3 options for operating systems
• 3 options for databases
• 2 options for application servers

Therefore, we have 3 x 3 x 2 = 18 possible combinations to test.

However, if we look closely at the diagram, we can see that some combinations are not valid or feasible because they are not connected by lines. For example, we cannot test LNX with WSP as an application server because there is no line between them. Similarly, we cannot test W2K with JBS as an application server because there is no line between them. Therefore, we need to exclude these invalid combinations from our calculation.

If we count only the valid combinations that are connected by lines in the diagram, we get:

• 5 combinations for LNX (LNX-ORA-JBS, LNX-ORA-WSP, LNX-MSQ-JBS, LNX-MSQ-WSP, LNX-SQL-JBS)
• 5 combinations for W2K (W2K-ORA-WSP, W2K-MSQ-WSP, W2K-SQL-WSP)
• 5 combinations for WSP (WSP-ORA-JBS, WSP-ORA-WSP, WSP-MSQ-JBS, WSP-MSQ-WSP)

Therefore, we have 5 + 5 + 5 = 15 valid combinations to test.

You can find more information about testing combinations in Software Testing Foundations: A Study Guide for the Certified Tester Exam, Chapter 4, Section 4.22.

Static analysis tools are tools that examine the code or design of a software system without executing it. Static analysis tools can be used to find defects, measure complexity, check compliance, or improve quality. Some examples of defect types that can be found by static analysis tools are:

• Variables that are never used: This defect type occurs when a variable is declared but not referenced or assigned in the code, which indicates a waste of memory or a logic error.
• Coding standard violations: This defect type occurs when the code does not follow the predefined rules or conventions for formatting, naming, commenting, etc., which affects the readability and maintainability of the code.
• Uncalled functions and procedures: This defect type occurs when a function or procedure is defined but not called or invoked in the code, which indicates a waste of resources or a missing functionality.

Memory leaks are defect types that are least likely to be found by static analysis tools because they are related to the dynamic behavior and performance of the software system. Memory leaks occur when a program does not release memory that it has allocated, causing the system to run out of memory and slow down or crash. Memory leaks can only be detected by dynamic analysis tools that monitor the memory usage of the program during execution. You can find more information about static analysis tools in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 6, Section 6.3.

The Test Analysis and Design activity of the test process is the activity where test conditions and test cases are identified and specified based on the test objectives and criteria. The Test Analysis and Design activity also involves identifying and preparing the necessary test data and test environment to support the test execution. Some of the tasks of the Test Analysis and Design activity are:

• Reviewing the test basis: This task involves reviewing the requirements, specifications, design documents, or other sources of information that form the basis for testing.
• Identifying test conditions: This task involves identifying what needs to be tested based on the test basis and objectives.
• Designing and prioritizing test cases: This task involves designing specific scenarios or steps to verify each test condition and assigning priorities to them based on their importance or risk level.
• Identifying necessary test data to support the test conditions and test cases: This task involves identifying what data is needed to execute each test case and how to obtain or generate it.
• Identifying and preparing the test environment: This task involves identifying what hardware, software, network, data, tools, etc., are needed to execute the test cases and how to set up and maintain them.

Measuring the percentage of prepared test cases with what was actually prepared is not a task of the Test Analysis and Design activity because it does not involve identifying or specifying anything related to testing. Rather, it is a task of the Test Monitoring and Control activity, which involves measuring and reporting the progress and status of testing against the planned activities and criteria. You can find more information about the Test Analysis and Design activity in A Study Guide to the ISTQB® Foundation Level 2018 Syllabus, Chapter 31.

A use case is a description of how a user interacts with a system to achieve a goal or perform a task. A use case typically consists of a sequence of steps or actions that the user and the system perform to complete the goal or task. A use case can be used as a basis for designing test cases that verify the functionality and usability of the system under test. A test sequence that represents a possible use case should follow the logical order and flow of the user-system interaction and cover the main scenario and possible variations or exceptions. For example, based on the test cases given for a Library Management System, we can identify the following use cases:

• UC1: Add a new borrower to the system
• UC2: Update a borrower’s data
• UC3: Remove a borrower from the system
• UC4: Loan a book to a borrower
• UC5: Return a book from a borrower
• UC6: Reserve a book for a borrower
• UC7: Send “reservation ready” message to a borrower

The test sequence that represents a possible use case is D. 1-2-6-7-4-5-3. This test sequence follows the logical order and flow of the user-system interaction and covers the main scenario and possible variations or exceptions. For example:

• TC1: Add a new borrower to the system -> This is the first step of the use case, where the user registers as a new borrower in the system.
• TC2: Update a borrower’s data -> This is a possible variation of the use case, where the user updates their personal or contact information in the system.
• TC6: Reserve a book for a borrower -> This is the second step of the use case, where the user reserves a book that they want to borrow from the library.
• TC7: Send “reservation ready” message to a borrower -> This is the third step of the use case, where the system sends a message to the user informing them that their reserved book is ready for pickup.
• TC4: Loan a book to a borrower -> This is the fourth step of the use case, where the user picks up their reserved book from the library and loans it from the system.
• TC5: Return a book from a borrower -> This is the fifth step of the use case, where the user returns their borrowed book to the library and returns it to the system.
• TC3: Remove a borrower from the system -> This is a possible exception of the use case, where

the user decides to cancel their membership and remove their account from the system.

The other test sequences do not represent possible use cases because they do not follow the logical order and flow of the user-system interaction or they do not cover the main scenario and possible variations or exceptions. For example:

• A. 1-4-2-7-5-6-3 -> This test sequence does not follow the logical order and flow of the user-system interaction because it performs some steps before or after they are supposed to happen. For example, it performs TC4 (Loan a book to a borrower) before TC6 (Reserve a book for a borrower), which does not make sense because the user cannot loan a book that they have not reserved yet.
• B. 1-6-2-5-7-4-3 -> This test sequence does not follow the logical order and flow of the user-system interaction because it performs some steps before or after they are supposed to happen. For example, it performs TC5 (Return a book from a borrower) before TC4 (Loan a book to a borrower), which does not make sense because the user cannot return a book that they have not loaned yet.
• C. 1-6-4-7-5-3-2 -> This test sequence does not cover the main scenario and possible variations or exceptions because it omits some steps that are essential for completing or terminating the use case. For example, it omits TC2 (Update a borrower’s data), which is a possible variation of the use case that allows the user to change their personal or contact information in the system.

You can find more information about use cases and test sequences in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 4, Section 4.2.