220-1101 Exam Dumps - CompTIA A+ Questions and Answers

DHCP stands for Dynamic Host Configuration Protocol, which is a protocol that provides quick, automatic, and central management for the distribution of IP addresses within a network1. A DHCP server can assign IP addresses and other network information to devices that request them, such as computers, smartphones, and routers2.

The IP address 169.254.2.2 is an example of an APIPA (Automatic Private IP Addressing) address, which is a special type of IP address that devices use when they cannot obtain a valid IP address from a DHCP server3. APIPA addresses are in the range of 169.254.0.1 to 169.254.255.254, with a subnet mask of 255.255.0.03. Devices that use APIPA addresses can only communicate with other devices on the same local network that also use APIPA addresses3.

The router in the question is assigned the address scope of 192.168.1.254/24, which means it has an IP address of 192.168.1.254 and a subnet mask of 255.255.255.04. This address scope belongs to the private IP address range of 192.168.0.0 to 192.168.255.255, which is commonly used for local networks4. Devices that use private IP addresses can communicate with other devices on the same local network or across different networks through NAT (Network Address Translation)4.

The most likely cause of the technician receiving the IP address 169.254.2.2 is that the DHCP server on the router is not working properly or is not configured correctly3. This could be due to various reasons, such as a misconfigured router, a faulty cable, a firewall blocking DHCP traffic, or an exhausted pool of IP addresses3. As a result, the technician’s device cannot obtain a valid IP address from the DHCP server and resorts to using an APIPA address instead3.

To fix this issue, the technician should check the router settings and make sure that the DHCP server is enabled and has enough available IP addresses to assign to devices2. The technician should also check the physical cabling and make sure it is properly connected and secured2. If the issue persists, the technician should try rebooting the router or resetting it to factory defaults2. Alternatively, the technician could manually assign a static IP address to the device that matches the router’s address scope, such as 192.168.1.x/242.

Physical cabling issues are the most likely cause of the display problems described. Loose, damaged, or faulty cables can cause intermittent signal loss, leading to a slow response, color distortion, lines on the display, and intermittent blanking. Checking and securing the connections or replacing the cable can resolve these issues. This aligns with the troubleshooting steps outlined in the CompTIA A+ Core 1 (220-1101) Exam Objectives under section 4.0 "Virtualization and Cloud Computing" and 5.0 "Hardware and Network Troubleshooting", which include checking physical connections as a primary step in diagnosing display issues .

A sandbox is a virtual environment that allows testing or running applications without affecting the main system. A sandbox can isolate the applications from the rest of the system, preventing any unwanted changes, errors, or security risks. A sandbox can also be easily reset to the initial state, discarding any modifications or data generated by the applications12.

A sandbox is a useful tool for stress testing multiple applications, as it can:

•Simulate different scenarios and conditions for the applications, such as high load, low memory, network latency, etc.

•Monitor and measure the performance, stability, and resource consumption of the applications under stress.

•Compare and analyze the results of different applications or different versions of the same application.

•Identify and fix any bugs, errors, or vulnerabilities in the applications before deploying them to the main system.

RAID 0 is a disk array configuration that splits data across two or more disks without parity or mirroring. RAID 0 provides the best I/O performance because it allows parallel read and write operations on multiple disks. RAID 0 also provides the most storage capacity possible because it does not use any disk space for redundancy. However, RAID 0 does not provide any fault tolerance and increases the risk of data loss if any disk fails.

References: The Official CompTIA A+ Core 1 Student Guide (Exam 220-1101) eBook, page 252

The technician is unable to access the company portal website, but other websites work fine. This suggests an issue with resolving the specific URL of the company portal, which is a function of DNS.

Here's why other options are not the most likely cause:

DHCP reservations: This is not relevant as the issue persists even when the technician tries a different workstation, indicating a problem beyond individual device configuration.

Static IP addresses: Similar to DHCP reservations, static IPs are not likely the cause as both affected workstations are experiencing the issue.

Default gateway: While the default gateway is necessary for internet access, other websites are working, making it less likely to be the root cause.

References:

CompTIA A+ Certification Core 1 220-1101 Study Guide, Chapter 4: Networking, Section 4.2 Addressing and Naming

The most likely cause of the issue is C. Physical cabling issues.

Physical cabling issues can affect the quality and stability of the display signal. If the cable is loose, damaged, or bent, it may cause intermittent connection, interference, or signal loss. This can result in slow, distorted, discolored, or blank display.

To troubleshoot physical cabling issues, the user should check the following steps:

•Make sure the cable is firmly connected to both the display and the video adapter.

•Inspect the cable for any signs of damage, such as cuts, frays, kinks, or exposed wires.

•Check the cable connectors for any bent or broken pins.

•Try a different cable or a different port on the display or the video adapter.

•If possible, test the display with another device or test another display with the same device.

The other options are less likely to cause the issue, because:

•Incorrect data source may result in no display or an error message, but not slow or distorted display.

•Incorrect resolution settings may cause stretched, blurry, or cropped display, but not discolored or blank display.

•Incorrect refresh rate may cause flickering or tearing display, but not slow or distorted display.

•Display burn-in may cause permanent image retention or ghosting on the display, but not intermittent or blank display.

For more information and tips on how to fix common display problems, you can visit these links:

•How to Troubleshoot Display or Video Issues on a Dell Monitor

•Display Troubleshooting - iFixit

•How to Fix the Most Common Problems With LCD Monitors

The next step that the technician should do to troubleshoot the issue is C. Swap the power supply if it is inoperable.

A power supply is a device that converts the alternating current (AC) from the wall outlet into direct current (DC) that the computer components can use. A power supply is essential for the computer to boot and function properly. A faulty or inadequate power supply can cause various issues, such as no power, no display, random shutdowns, or beeping sounds.

In this scenario, the technician is trying to fix a computer that fails to boot even when all the RAM is removed. RAM stands for Random Access Memory, and it is a type of memory that stores data and instructions for the processor to access and process. RAM is also essential for the computer to boot and function properly. A faulty or incompatible RAM can cause various issues, such as no boot, no display, blue screen, or beeping sounds.

One of the basic troubleshooting techniques for a computer that fails to boot is to remove all the RAM modules and try to boot with one module at a time in different slots. This can help to identify if the problem is caused by a bad RAM module or a bad RAM slot. If the computer still fails to boot even when all the RAM is removed, it means that the problem is not related to the RAM, but to another component.

The next step that the technician should do is to swap the power supply if it is inoperable. This means that the technician should test the power supply with a multimeter or a power supply tester, and replace it with a known good one if it is faulty or insufficient. This can help to determine if the problem is caused by a bad power supply or a bad motherboard.

The other options are not the next steps that the technician should do, because they are less likely or less effective. Inspecting the motherboard for swollen capacitors (option A) may be helpful if the problem is caused by a damaged or defective motherboard, but it requires opening the computer case and visually examining the motherboard components. Replacing the CMOS battery (option B) may be necessary if the problem is caused by a low or dead CMOS battery, but it usually affects only the BIOS settings and not the boot process. Checking to see if the HDD power connectors are well seated (option D) may be useful if the problem is caused by a loose or faulty HDD connection, but it usually affects only the data access and not the boot process.

For more information about troubleshooting power supply and boot issues, you can refer to the following web search results: [How to Troubleshoot a Computer That Won’t Turn On], [How to Test a Power Supply Using a Multimeter], [How to Fix a Computer That Shows No Sign of Power], [How to Troubleshoot Beep Codes].

A captive portal is a web page that requires users to agree to terms and conditions, enter credentials, or provide payment information before accessing a wireless network. Some devices, such as streaming media devices, may not have a web browser or a user interface to interact with the captive portal. One possible solution is to connect to the hotspot on the user’s device, such as a smartphone or a tablet, and use it as a bridge to access the internet through the wireless network. The user’s device can authenticate with the captive portal and share its internet connection with other devices via Wi-Fi, Bluetooth, or USB. Reference: https://partners.comptia.org/docs/default-source/resources/a-core-1-content-guide (page 12)