220-1101 Exam Dumps - CompTIA A+ Questions and Answers

When replacing a power supply in a computer, wearing an antistatic wrist strap is crucial to prevent static electricity from damaging the computer components. Static electricity can easily damage sensitive electronic components within the computer; therefore, using an antistatic wrist strap helps to ground the technician, mitigating the risk of electrostatic discharge. The other options provide general safety but do not address the primary concern of electrostatic discharge in this context.

References:CompTIA A+ Core 1 (220-1101) objectives covering best practices for hardware maintenance, including electrostatic discharge prevention.

Step by Step Detailed Comprehensive Explanation with All CompTIA References:

Analysis of the Problem:

Loud fans and immediate shutdown under stress are indicators of overheating.

Option Evaluation:

A. Install a liquid cooling unit: Premature without diagnosing the issue. Incorrect.

B. Monitor the core CPU and system temperatures: Confirms overheating and pinpoints thermal issues. Correct.

C. Reapply thermal paste to the processor heat sink: This may help but needs confirmation of the issue first. Incorrect.

D. Clean and test all fans: Ensures airflow but does not isolate the root cause immediately. Incorrect.

An IP address starting with the first octet "169" immediately suggests an issue, indicating that the device has been assigned an Automatic Private IP Address (APIPA). APIPA addresses are self-assigned by a computer or device when it's unable to obtain an IP address from a DHCP server, which is common in situations where the device is unable to connect to the network or the DHCP server is not functioning properly. The range for APIPA addresses is 169.254.0.1 to 169.254.255.254, and seeing an IP address within this range is a clear indicator of connectivity issues related to DHCP.

References:

CompTIA A+ Core 1 (220-1101) Exam Objectives, specifically the networking domain that covers understanding and troubleshooting network connectivity issues, including the significance of IP address ranges such as APIPA.

Knowledge of TCP/IP networking concepts, specifically the role of DHCP in network connectivity and the implications of an APIPA address on a device's ability to connect to the internet.

A significant increase in the number of reallocated sectors on a hard drive is a clear indication that the drive is experiencing physical damage or wear and tear that cannot be repaired through software means. Reallocated sectors are bad sectors that the drive's firmware has marked as unusable and moved data to spare sectors. This is often a precursor to drive failure. Therefore, the most prudent next step is to replace the hard drive to ensure data integrity and system reliability.

References:

CompTIA A+ Core 1 Exam Objectives Section 5.3: Given a scenario, troubleshoot and diagnose problems with storage drives and RAID arrays.

Reasoning: A docking station is designed to provide a central connection point for multiple peripherals, such as monitors, keyboards, mice, and network cables. It allows users to quickly connect or disconnect all devices by simply docking or undocking their laptop, improving mobility and reducing wear and tear on individual ports.

Why the Other Options Are Incorrect:

A. Serial interfaces:

Serial interfaces are outdated and rarely used in modern laptops or peripherals. They are not practical for facilitating the connection of multiple devices.

C. Network switch:

A network switch is used to connect multiple devices to a network, but it does not simplify the connection of peripherals to a laptop.

D. USB hub:

A USB hub can extend the number of available USB ports but lacks the full functionality of a docking station, such as video output or Ethernet connectivity.

Practical Example:

A user with a laptop, external monitors, keyboard, and mouse can use a docking station to connect all devices with a single action, instead of plugging in each device manually.

CompTIA A+ Exam Objective Alignment:

Objective 5.2: Explain device interfaces, connection types, and usage of docking stations.

Secure Shell (SSH) is a protocol used to securely access and manage devices over a network. It provides a secure channel over an unsecured network in a client-server architecture, enabling technicians to perform troubleshooting and management tasks remotely with encryption to ensure the security of the data transmitted. FTP and TFTP are used for file transfers and do not inherently provide the same level of security or direct device management capabilities. RDP is used for remote desktop connections but is not as universally applicable for various devices as SSH.

References:

CompTIA A+ Core 1 Exam Objectives Section 2.1: Compare and contrast Transmission Control Protocol (TCP) and User Datagram Protocol (UDP) ports, protocols, and their purposes.

When multiple RAM modules with different speeds are installed in a system, the system will default to the speed of the slowest module to maintain reliability and stability. In this case:

The system contains two DDR3-1066 (PC3-8500) modules and one DDR3-1333 (PC3-10600) module.

The slowest RAM speed is DDR3-1066 (PC3-8500), and the system will run all memory modules at this speed to prevent timing mismatches and data corruption.

Key Concepts:

Backward Compatibility: RAM modules with higher speeds can operate at lower speeds when mixed with slower modules.

Reliability vs. Performance: Operating all modules at the slowest speed ensures stability, especially when modules have different specifications.

CompTIA A+ Exam Objectives References:

220-1101, Section 3.2: Covers selecting and installing appropriate RAM, understanding different speeds (DDR3-1066, DDR3-1333), and how system compatibility is ensured​.

If a desktop PC shuts down suddenly and there is a burning smell coming from the area where it is connected to the wall socket, the first step should be to check that the power cable is not damaged. A damaged power cable can cause electrical shorts or overheating, leading to sudden shutdowns and a burning smell. Inspecting the power cable for fraying, cuts, or other damage can help identify if it is the source of the problem.

References:

CompTIA A+ Core 1 (220-1101) Exam Objectives, specifically the sections on troubleshooting hardware components and power-related issues, which would include assessing external factors such as the condition of power cables.

Basic electrical safety and troubleshooting principles, emphasizing the importance of checking power connections and cables when faced with symptoms of electrical issues.

C. Initiate the system restore:

If the technician is confident that rolling back the system to a previous restore point will resolve the issue, the next logical step is to initiate the System Restore process.

System Restore allows the system to revert to a state before the OS update, which can eliminate the performance issues caused by the update.

Incorrect Options:

A. Document the findings: Documentation is important but should occur after resolving the issue.

B. Investigate any recent infrastructure changes: This is unnecessary if the issue is already attributed to the OS update.

D. Verify full system functionality: This step should be performed after the System Restore is completed.

A network tap is a device that can be used to monitor and analyze the traffic and data that pass through a network. A network tap can be inserted between two network devices, such as a switch and a router, and capture the packets that flow in both directions. A network tap can then send a copy of the packets to another device, such as a laptop or a server, for inspection and troubleshooting. A network tap can help diagnose and resolve network issues, such as performance, security, or configuration problems.

A network tap is the least disruptive tool for checking the status of a local network device, because it does not interfere with the normal operation of the network. A network tap does not alter or block the packets that it captures, and it does not introduce any latency or noise to the network. A network tap can also operate in stealth mode, which means that it is invisible to the network devices and cannot be detected by hackers or attackers.

The technician is unable to access the company portal website, but other websites work fine. This suggests an issue with resolving the specific URL of the company portal, which is a function of DNS.

Here's why other options are not the most likely cause:

DHCP reservations: This is not relevant as the issue persists even when the technician tries a different workstation, indicating a problem beyond individual device configuration.

Static IP addresses: Similar to DHCP reservations, static IPs are not likely the cause as both affected workstations are experiencing the issue.

Default gateway: While the default gateway is necessary for internet access, other websites are working, making it less likely to be the root cause.

References:

CompTIA A+ Certification Core 1 220-1101 Study Guide, Chapter 4: Networking, Section 4.2 Addressing and Naming

The most likely answer is C. The pen batteries need recharging.

An active touch pen is a stylus that uses a battery to power features such as pressure sensitivity, buttons, or Bluetooth connectivity. If the pen batteries are low or depleted, the pen may stop working or become inaccurate1. To fix this issue, you should recharge the pen batteries using the provided charger or cable, or replace them with new ones if they are not rechargeable1.

The other options are less likely to cause the issue. A scratched tablet screen may affect the touch sensitivity, but it should not affect the pen functionality. The pen software may need updating to improve performance or compatibility, but it should not stop the pen from working altogether. Software updates may disable the pen if they change the settings or drivers, but this can be fixed by re-enabling the pen or reinstalling the drivers2.

References:

1: Troubleshoot your Surface Pen - Microsoft Support

2: Windows 10 touch screen: active pen works, finger does not - Super User

The most likely reason for this error is A. The HDD is malfunctioning.

A bootable device not found error usually indicates that the system cannot access or detect the hard disk that contains the operating system files. This could be due to a physical or logical damage to the hard disk, such as bad sectors, corrupted partitions, or faulty cables. According to the web search results, some possible causes and solutions for this error are:

Hard drive connection issue: Check the cabling and power supply to the hard drive and make sure they are properly connected12.

Corrupt hard drive partitions: Use a Windows installation media to scan and repair the corrupt system files using the System File Checker (SFC) tool1.

Damaged hard drive: Replace the hard drive with a new one and reinstall the operating system2.

Incorrect boot sequence in the BIOS: Enter the BIOS or UEFI settings menu and change the boot order to make sure that the system drive is in the first position13.

Damaged MBR (Master Boot Record): Use a Windows installation media to repair the Windows bootloader using the Diskpart tool1.

The correct answer is A. Access point.

An access point is a device that extends the wireless coverage of a network by creating a hotspot that allows wireless devices to connect to the network1. An access point can be connected to a router or a switch via an Ethernet cable or a wireless bridge1. By deploying one or more access points throughout a SOHO location, the technician can provide better wireless connectivity and eliminate dead zones or weak signals2.

A managed switch is a device that allows multiple devices to communicate on a network by forwarding data packets based on their destination addresses3. A managed switch can also provide advanced features such as VLANs, QoS, security, and remote management3. However, a managed switch does not improve wireless connectivity, as it only works with wired devices.

A POE hub is a device that provides power and data over a single Ethernet cable to devices that support Power over Ethernet (PoE) technology, such as IP cameras, VoIP phones, and wireless access points4. A POE hub can simplify the installation and placement of these devices by eliminating the need for separate power adapters or outlets4. However, a POE hub does not improve wireless connectivity by itself, as it still requires an access point or a router to create a wireless network.

A Wi-Fi router is a device that combines the functions of a router and an access point, providing both wired and wireless connectivity to a network and the internet. A Wi-Fi router can be used to create a SOHO network, but it may not be sufficient to cover the entire location with a strong and reliable wireless signal. To improve wireless connectivity, the technician may need to add additional access points or use a mesh Wi-Fi system that consists of multiple routers that work together to create a seamless wireless network.

Therefore, an access point is the best option among the choices to improve wireless connectivity throughout a SOHO location.

Calibration is the process of adjusting the printer settings to ensure that the printed output matches the original document. Calibration can fix issues such as misaligned images, color accuracy, and print quality. References: [Printer Calibration]