LEED-Green-Associate Exam Dumps - USGBC Leadership in Energy and Environmental Design (LEED) Questions and Answers

Regional Priority credits are awarded to encourage projects to address local environmental issues that are of particular importance or concern for the region where the project is located. These issues may include water scarcity, air quality, habitat protection, or human health. Regional Priority credits are not new LEED credits, but rather existing credits that have been identified by regional councils or chapters of USGBC as having higher priority or relevance for their areas. Projects can earn up to four bonus points by achieving Regional Priority credits. References: LEED v4 BD+C Reference Guide, Introduction, page 13; LEED v4 Impact Category and Point Allocation Process Overview1

The environmental harm associated with transportation is reduced when purchasing and installing locally sourced, environmentally preferable products. Locally sourced products are products that are extracted, harvested, recovered, or manufactured within a certain distance from the project site. Environmentally preferable products are products that have reduced environmental impacts compared to similar products in terms of energy use, water use, materials use, waste generation, emissions, toxicity, and durability. Purchasing and installing locally sourced, environmentally preferable products reduces the amount of fuel consumption, greenhouse gas emissions, air pollution, and road congestion associated with transporting products over long distances. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving materials and resources efficiency is to “use local or regional materials (extracted, processed and manufactured within 100 miles)” [1, p. 15]. References: LEED Green Associate Candidate Handbook, [Environmentally Preferable Purchasing | U.S. Environmental Protection Agency]

A life-cycle assessment (LCA) is a strategy that can help an owner of newly acquired land design a building that uses materials that have minimal impact on the environment. An LCA is a method that evaluates the environmental impacts of a product or material over its entire life cycle, from extraction to disposal. An LCA can measure the impacts on various categories, such as energy use, water use, greenhouse gas emissions, resource depletion, and waste generation. An LCA can help compare different products or materials based on their environmental performance and select the ones that have the lowest impact13. References: LEED v4 Green Associate Candidate Handbook1, EPA’s Life Cycle Assessment3

 LEED for Neighborhood Development (LEED ND) is a rating system that aims to inspire and help create better, more sustainable, well-connected neighborhoods1. It looks beyond the scale of buildings to consider entire communities1. One of the main goals of LEED ND is to reduce vehicle miles traveled (VMT) and greenhouse gas emissions by promoting the location and design of neighborhoods that are accessible by foot or public transportation234. Therefore, LEED ND encourages development within and near existing communities or public transportation infrastructure, which is option C.

References: =

LEED certification for neighborhood development

LEED for Neighborhood Development - Wikipedia

LEED® for Neighborhood Development - Grow Smart RI

LEED for Neighborhood Development - s3.amazonaws.com

receptacle load is the electrical load that is connected to the building’s electrical system through receptacles (also known as outlets or sockets). Receptacle load includes both regulated and non-regulated loads, such as computers, printers, monitors, lamps, refrigerators, microwaves, coffee makers, etc. Receptacle load does not include hard-wired equipment, such as lighting fixtures, HVAC systems, or elevators12.

Receptacle load is one of the major components of plug and process loads (PPLs), which consume about 47% of primary energy in U.S. commercial buildings2. Reducing receptacle load can help improve building energy efficiency and achieve LEED certification. One of the strategies to reduce receptacle load is to use automatic receptacle controls, which are devices that turn off or reduce power to receptacles when they are not in use. Automatic receptacle controls are required by ANSI/ASHRAE/IES Standard 90.1-2019: Energy Standard for Buildings Except Low-Rise Residential Buildings, as well as NIH DRM 10.5.313.

To maintain the LEED Green Associate credential, you must earn 30 continuing education hours every two years, with at least six of those hours being LEED specific. This requirement ensures that LEED Green Associates stay up-to-date with the latest developments in green building practices and LEED rating systems. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

The methodology that is used to evaluate and study the economic performance of a building or system over its entire life is life cycle assessment (LCA). LCA is a technique that assesses the environmental aspects and potential impacts associated with a product, process, or service throughout its life cycle, from raw material extraction to end-of-life disposal or recycling7. LCA can also include an economic dimension by incorporating life cycle costing (LCC), which estimates the total costs of ownership over the life cycle of a product or system8. By combining LCA and LCC, one can evaluate the environmental and economic performance of a building or system in a holistic way, taking into account both the initial investment costs and the long-term operational costs. This can help identify trade-offs and synergies between environmental and economic objectives, as well as opportunities for improving efficiency and reducing impacts9. References: Life-cycle assessment7; What is Life Cycle Assessment (LCA)?8; Life Cycle Costing in Construction Projects: A Case Study of a Municipal Building in Portugal9

LEED Interior Design and Construction (ID+C) is a rating system that applies to projects that are a complete interior fit-out or renovation1. Data centers are one of the project types that can use this rating system, as they have specific requirements for energy efficiency, cooling, and reliability2.

References: =

LEED rating system

LEED rating system selection

LEED Rating Systems Overview

The cradle-to-cradle approach to sustainable materials evaluates building materials from extraction to reuse, which means that the materials are considered as part of a continuous cycle of use and regeneration, rather than a linear process of consumption and disposal. The cradle-to-cradle approach aims to eliminate waste and pollution, conserve resources and energy, and create positive impacts for the environment and human health. The cradle-to-cradle approach is based on the principles of eco-effectiveness, which include designing products and systems that are safe and healthy for humans and nature, using renewable energy and clean water, celebrating diversity and creativity, and respecting social and environmental justice12. The cradle-to-cradle approach is also recognized and encouraged by LEED v4, which includes a credit for using products that have achieved Cradle to Cradle certification34.

 In the commercial LEED rating systems, achieving 40-49 points will result in Silver level certification. The points are awarded based on how well the project meets various sustainability criteria set out in the LEED rating system. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources