RedHat RH302 Based on Real Exam Environment

Do the following steps as:

1.Verify the File whether Shared or not ? : cat /etc/exports

2.Start the nfs service: service nfs start

3.Start the portmap service: service portmap start

4.Make automatically start the nfs service on next reboot: chkconfig nfs on

5.Make automatically start the portmap service on next reboot: chkconfig portmap on

6.Verify either sharing or not: showmount –e localhost

7.Check that default firewall is running on system ? if running flush the iptables using iptables –F and stop the iptables service.

Very Easy question, nameserver is specified in question,

1.vi /etc/resolv.conf

nameserver 192.168.0.254

2.host server1.example.com

Do the following steps as:

Think while Problems occurred on booting System on Runlevel 5 (X Window).

/tmp is full or not

Quota is already reached

Video card or resolution or monitor is misconfigured.

xfs service is running or not.

Do These:

1.df –h /tmp/tmp is full remove the unnecessary file

quota usernameif quota is already reached remove unnecessary file from home directory.

Boot the System in runlevel 3.you can pass the Kernel Argument from boot loader.

Use command: system-config-displayIt will display a dialog to configure the monitor, Video card, resolution etc.

Set the Default Runlevel 5 in /etc/inittab

id:5:initdefault:

6.Reboot the System you will get the GUI login Screen.

The LVM system organizes hard disks into Logical Volume (LV) groups. Essentially, physical hard disk partitions (or possibly RAID arrays) are set up in a bunch of equal-sized chunks known as Physical Extents (PE). As there are several other concepts associated with the LVM system, let's start with some basic definitions:

Physical Volume (PV)is the standard partition that you add to the LVM mix. Normally, a physical volume is a standard primary or logical partition. It can also be a RAID array.

Physical Extent (PE)is a chunk of disk space. Every PV is divided into a number of equal sized PEs. Every PE in a LV group is the same size. Different LV groups can have different sized PEs.

Logical Extent (LE)is also a chunk of disk space. Every LE is mapped to a specific PE.

Logical Volume (LV)is composed of a group of LEs. You can mount a filesystem such as /home and /var on an LV.

Volume Group (VG)is composed of a group of LVs. It is the organizational group for LVM. Most of the commands that you'll use apply to a specific VG.

1.Verify the size of Logical Volume:lvdisplay /dev/vg0/lv1

2.Verify the Size on mounted directory:df –h or df –h mounted directory name

3.Use :lvextend –L+400M /dev/vg0/lv1

4. resize2fs /dev/vg0/lv1to bring extended size online.

5. Again Verify using lvdisplay and df –h command.