Online RH302 Questions Video

Do the following steps as:

1.chmod g+s /archive

2.Verify using: ls -ld /archive

Permission should be like:

drwxrws--- 2 root sysuser 4096 Mar 16 18:08 /archive

If SGID bit is set on directory then who every users creates the files on directory group owner automatically the owner of parent directory.

To set the SGID bit: chmod g+s directory

To Remove the SGID bit: chmod g-s directory

Do the following steps as:

1.chmod 770 /data

2.Verify using : ls –ld /data

Preview should be like:

drwxrwx--- 2 root sysadmin 4096 Mar 16 18:08 /data

To change the permission on directory we use the chmod command. According to the question that only the owner user (root) and group member (sysadmin) can fully access the directory so: chmod 770 /data

Note: Examiner will provide you the Installation startup CD. And here mentioned size may vary see on the exam paper.

1.Insert the CD on CD-ROM and start the system.

2.In Boot: Prompt typelinux askmethod

3. It will display the Language, keyboard selection.

4. It will ask you for the installation method.

5. Select the HTTP from the list

6. It will ask the IP Address, Net mask, Gateway and Name Server. Select Use

Dynamic IP Configuration: because DHCP Server will be configured in your exam lab.

7. It will ask for the Web site name and Redhat Enterprise Linux Directory.

Specify the HTTP Server: 192.168.0.254

Directory: rhel4Because Default Directory for http is /var/www/html

8. After Connecting to the HTTP Server Installation start. Go upto the partition screen by selecting the different Options.

9. Create the partition According to the Question because Size and what-what partition should you create at installation time is specified in your question

10. Then select the MBR Options, time zone and go upto package selections.

It is another Most Important Time of installation. Due to the time limit, you should be

care about the installation packages. At Exam time you these packages are enough.

X-Window System

GNOME Desktop

(these two packages are generally not required)

Administration Tools.

System Tools

Windows File Server

FTP Servers

Mail Servers

Web Servers

Network Servers

Editors

Text Based Internet

Server Configuration Tools

Printing Supports

When installation will complete, your system will reboot. Jump for another Question.

Do the following steps as:

1.echo “1” >/proc/sys/net/ipv4/ip_forward

2.vi /etc/sysctl.conf

net.ipv4.ip_forward = 1

If you want to use the Linux System as a Router to make communication between different networks, you need enable the IP forwarding. To enable on running session just set value 1 to /proc/sys/net/ipv4/ip_forward. As well as automatically turn on the IP forwarding features on next boot set on /etc/sysctl.conf file.