During the deployment of a WLAN the customer complains that the chosen locations for several APs are ruining the aesthetics of the building Instead of changing AP locations and requiring a redesign, what action can you recommend1?
What factors are key features when designing a guest network for a large enterprise?(Choose all that apply.)
Response:
Before connecting, mounting and powering 213 total controller-based APs what action should be taken to ensure that they are configured by the controller once powered on and connected lo the network''
To ensure that your design meets the requirements of the WLAN, what should be defined in your WLAN design software that will result in different requirements at varying locations on the floor plan1?
Given:
In your regulatory domain, a Tx Power Level of "1" is equivalent to 17 dBm.
For every integer increment (e.g. from 1 to 2) to the Tx Power Level, the APs transmit power is halved.
In units of mW, what is the actual transmit power for an AP configured at a Tx Power Level of "4"?
What commonly used item can help lo prevent back pain during lengthy site surveys?
An engineering firm just upgraded their WLAN form nine 802.11n APS to nine 802.11ac APs. After this upgrade, they did not see any improvement in throughput. What is the most likely cause of this result?
Response:
What is the best method of gathering attenuation measurements from any building materials or objects?
Switches and APs have already been chosen by your customer. All switches support 802.3bz MultiGig interfaces and APs are 4x4:4 802.11ac
wave 2 capable of using dual-5GHz and have one MultiGig interface. Some cable drops for the APs will run for more than 180.5 feet (or 55
meters). To support MultiGig, what is the best choice of cabling?
TESTED 22 Feb 2025
