CPIM-8.0 Exam Dumps - APICS CPIM Questions and Answers

A push system is a production system that relies on forecasts and schedules to plan the production and distribution of goods and services. A pull system is a production system that responds to actual customer demand and signals to trigger the production and distribution of goods and services. A transition from a push system to a pull system requires a change in the mindset and the processes of the organization, as well as the adoption of new tools and techniques to enable a demand-driven production system12.

One of the tools that is commonly used in a pull system is kanban, which is a visual signal that indicates the need for replenishment of materials or products. Kanban cards are attached to standardized containers that hold a fixed amount of inventory. When a container is empty, the kanban card is sent back to the upstream process as a signal to produce more. This way, the inventory level is controlled by the actual consumption of the downstream process, and the production is synchronized with the demand13.

One of the actions that hinders the transition from a push system to a pull system is using work orders as a backup. Work orders are documents that authorize the production of a certain quantity of a product or a service, based on a forecast or a schedule. Work orders are typical of a push system, as they are not triggered by the actual customer demand, but by the planned production. Using work orders as a backup means that the organization is not fully committed to the pull system, and still relies on the push system to ensure the availability of inventory. This can create confusion, inconsistency, and inefficiency in the production system, as well as increase the inventory holding costs and the risk of obsolescence1 .

Therefore, using work orders as a backup is the correct answer, as it is an action that hinders the transition from a push system to a pull system. The other options are actions that support the transition, as they are aligned with the principles and practices of a pull system.

 The time spent in queue by a specific manufacturing job is determined by the priority of the order. Priority is the relative importance or urgency of an order compared to other orders in the system. Priority can be assigned based on various criteria, such as due date, customer preference, profitability, or first-come-first-served. Priority determines the order in which jobs are processed at each workstation and affects the waiting time and flow time of each job. Higher priority jobs have shorter waiting times and lower priority jobs have longer waiting times. Priority can be used as a tool to manage the trade-offs between customer service, capacity utilization, and inventory levels. References:

• Managing Supply Chain Operations, Chapter 7: Scheduling and Sequencing, Section 7.2: Priority Rules
• CPIM Exam Content Manual, Module 6: Detailed Schedules, Section 6.2: Scheduling and Sequencing, Subsection 6.2.2: Priority Rules

One way to mitigate liability risk in the supply chain is to require traceability for components. Liability risk is the risk that a party may be held responsible for certain types of losses caused by its actions or products to third parties1. Traceability is the ability to track the origin, history, location, and movement of a product or a component through the supply chain2. Requiring traceability for components can help to mitigate liability risk in the supply chain by enabling the identification and verification of the quality, safety, and compliance of the components, as well as the detection and prevention of counterfeit, defective, or hazardous components. Traceability can also facilitate the recall, repair, or replacement of faulty components, and the allocation of responsibility and accountability among the supply chain partners in case of a liability claim34. References: 1 What is a Liability Risk? - Definition from Insuranceopedia 5 2 Traceability - Wikipedia 6 3 Supply Chain Liability in the Corporate Sustainability Due Diligence … 7 4 CPIM Exam References - Association for Supply Chain Management 8

An X-bar chart is a type of control chart that is used to determine the average value of a group of units. It is also known as a mean chart. It plots the sample means of subgroups of units over time and compares them with the center line and the control limits. An X-bar chart is useful for monitoring the central tendency of a process and detecting any shifts or trends in the process mean. It is often used in conjunction with an R-chart, which measures the subgroup variation. References:

• Managing Supply Chain Operations, Chapter 9: Quality Management, Section 9.2: Statistical Process Control, Subsection 9.2.1: Control Charts
• CPIM Exam Content Manual, Module 8: Quality, Technology and Continuous Improvement, Section 8.1: Quality Management, Subsection 8.1.2: Statistical Process Control, Subsubsection 8.1.2.1: Control Charts

In a lean environment, the batch-size decision for planning “A” items would be done by lot-for-lot (L4L). L4L is an inventory management technique that orders exactly the quantity needed to meet the demand for each period. This minimizes the work in process, cycle time, and inventory holding costs. L4L is consistent with the lean principles of reducing batch sizes, eliminating waste, and responding to customer pull. The other options are not suitable for a lean environment, as they either order more than the demand (least total cost, min-max system, periodic order quantity) or incur more setup costs (least total cost, periodic order quantity). References:

•[CPIM Part 2 - Section A - Topic 3 - Lean and Just-in-Time]

•Optimize Production Batch Sizes

•How to determine your Lot Size - Part 1

Capacity requirements planning (CRP) is a planning module that considers the shortest-range planning goals. CRP is a process of determining the amount of available capacity and comparing it with the required capacity to execute the planned orders in the master production schedule (MPS) and the material requirements planning (MRP). CRP is usually done at the work center level and for a time horizon of a few weeks or months. CRP helps to identify and resolve capacity issues, such as overloads or underloads, and to adjust the production plan accordingly. CRP is the most detailed and accurate method of capacity planning, as it considers the actual routings, lead times, and lot sizes of the orders. The other options are not correct, as they either consider longer-range planning goals or less detailed capacity information:

•Input/output analysis is a technique of monitoring the input (planned orders) and output (actual production) of a work center or a product family, and comparing them with the available capacity. Input/output analysis is usually done at the aggregate level and for a time horizon of a few months or quarters. Input/output analysis helps to measure the performance of the production plan and to identify and correct deviations from the plan.

•Resource planning is a process of determining the long-range capacity requirements for labor, equipment, facilities, and other resources, based on the sales and operations plan (S&OP). Resource planning is usually done at the aggregate level and for a time horizon of a few years. Resource planning helps to support the strategic decisions and investments related to the resource capacity.

•Rough-cut capacity planning (RCCP) is a process of verifying the feasibility of the master production schedule (MPS) in terms of the available capacity of critical resources, such as key machines or labor skills. RCCP is usually done at the product family level and for a time horizon of a few months or quarters. RCCP helps to validate the MPS and to identify and resolve potential capacity bottlenecks or gaps. References:

•[CPIM Part 2 - Section A - Topic 2 - Capacity Planning]

•Capacity Requirements Planning (CRP)

•Input/Output Control

•Resource Planning

•Rough Cut Capacity Planning (RCCP)

A cellular production system is a type of lean manufacturing system that reduces waste and improves efficiency by grouping machines and workers into cells that can produce a complete product or a product family. A pull production activity control (PAC) technique is most appropriate for a cellular production system because it allows the cells to produce only what is needed by the downstream processes or customers, thus minimizing inventory and overproduction. A pull PAC technique also enables quick response to changes in demand and feedback from quality control. A push PAC technique, on the other hand, is based on predetermined schedules and forecasts, which may not match the actual demand and may result in excess inventory and waste. The shortest processing time (SPT) rule and the distribution requirements planning (DRP) are not specific to cellular production systems and do not take into account the customer demand or the cell capacity. References:

•CPIM Part 2 Exam Content Manual, p. 49

•Cellular Manufacturing: A Comprehensive Guide

•Cellular manufacturing - Wikipedia

Work-in-process (WIP) cost is the total cost of the units that are partially completed in the production process. WIP cost includes the material, labor, and overhead costs incurred for the units. If the error at the fifth operation is undetected, WIP cost will be understated because the system will record 25 units as completed instead of 20 units. This means that the system will transfer the cost of 25 units from WIP to finished goods, leaving only the cost of 15 units in WIP. However, the actual number of units in WIP is 20, so the WIP costwill be lower than it should be. The other conditions will not be true if the error is undetected. Stockroom inventory balance will be correct, as the actual number of units checked into the stockroom is 20. Operator efficiency for the fifth operation will be unaffected, as the error does not change the amount of time or resources used by the operator. Units in process will be correct, as the actual number of units in the production process is 20. References: Work in Process (WIP) | APICS Dictionary Term of the Day, APICS CPIM 8 Planning and Inventory Management | ASCM

Moving average forecasting methods are best when demand shows high random variation, as they help to smooth out the noise and capture the underlying level of demand. Moving average methods use the average of the most recent observations as the forecast for the next period. They assign equal weights to all observations in the average, and drop the oldest observation when a new one becomes available. Moving average methods are not suitable for demand patterns that show a clear trend, consistent seasonality, or a cyclical pattern, as they cannot capture these components of demand. For these patterns, more sophisticated methods such as exponential smoothing or regression are needed. References: Forecasting with moving averages, APICS CPIM 8 Planning and Inventory Management | ASCM

A push system is a production system that operates based on forecasts and schedules, rather than actual customer demand. A push system pushes products to the market regardless of the current demand, and often results in excess inventory and waste. A push system does not consider the capacity constraints of the work centers, and therefore may send work orders to them even if they are not able to process them. This can create bottlenecks, delays, and inefficiencies in the production process12.

The other options are not correct because:

•B. Work centers are scheduled using finite capacity planning. This is not a characteristic of a push system, but rather a pull system. Finite capacity planning is a method of scheduling that takes into account the actual capacity of the work centers, and only releases work orders when there is enough capacity to process them. This reduces the risk of overloading the work centers and improves the flow of production3.

•C. Work centers operate using decentralized control. This is not a characteristic of a push system, but rather a pull system. Decentralized control is a method of management that gives more autonomy and decision-making power to the work centers, and allows them to adjust their production according to the actual demand and capacity. This increases the flexibility and responsiveness of the production system4.

•D. Work centers signal previous work centers when they are ready for more work. This is not a characteristic of a push system, but rather a pull system. This is a common practice in a pull system that uses kanban cards as visual signals to trigger the production or replenishment of a product. The work centers only request more work when they have enough capacity and demand for it, and avoid overproduction and waste5.

References := 1 Push System vs. Pull System: Adopting A Hybrid Approach To MRP1 2 Push Systems vs. Pull System: Definitions and Differences4 3 Finite Capacity Planning - an overview | ScienceDirect Topics 4 Centralized vs. Decentralized Manufacturing | IndustryWeek 5 Kanban - an overview | ScienceDirect Topics