4A0-C01 Exam Dumps - Nokia SRC Certification Questions and Answers

An SDP does not have a path-mtu

The path-mtu must be set by the administrator.

By default, the path-mtu is calculated automatically from the network port MTU of the PE router.

The path-mtu is calculated based on the service MTU of the service using the SDP.

The path-mtu is signaled between the PE endpoints when the service is established.

PE1>config>service>vpm>bgp#info

---------------------------------------------------

group "toCE1"

family ipv6

export "mbgp-bgp"

neighbor 2001:db8:12::1

peer-as 64497

exit

exit

PE1>config>service>vpm>bgp#info

---------------------------------------------------

group "toCE1"

family ipv6

export "mbgp-bgp"

neighbor 2001:db8:12:1

peer-as 64496

exit

exit

PE1>config>router>bgp#info

---------------------------------------------------

group "toCEl"

family ipv6

export "mbgp-bgp"

neighbor 2001 db8:12::1

peer-as 64497

exit

exit

PE1>config>router>bgp#info

---------------------------------------------------

group "toCE1"

family ipv6

export "mbgp-bgp"

neighbor 2001:db8:12::1

peer-as 64496

exit

exit

It provides the ability to establish connection oriented paths over a connectionless IP network.

It provides a mechanism to engineer network traffic patterns independently of IP routing tables.

It will work over most physical layer protocols.

It can use GRE tunnels to transport data from many different protocols over an IP network.

The SAP 1/1/1 will forward all traffic transparently.

The SAP 1/1/1:0.* will forward all untagged traffic and traffic tagged with VLAN 0.

The SAP 1/1/1:* will forward untagged traffic but not tagged traffic.

TheSAP1/1/1:400 will forward customer traffic tagged with VLAN 400

The SAP 1/1/1:0 will forward untagged traffic and traffic tagged with VLAN 0

Link-based and T-LDP sessions may be configured on the same LSR.

T-LDP supports sessions between non-directly connected devices.

T-LDP can be configured between directly connected devices.

T-LDP Hello messages are sent to a multicast address.

The customer's Layer 2 header is preserved at the iLER for Layer 2 services.

The customer's Layer 2 Header is preserved at the iLER for Layer 3 services.

The service provider's Layer 2 header is added at the iLER for Layer 2 services.

The service provider's Layer 2 header is added at the iLER for Layer 3 services.

After a new path for LSP-1 is established on R1-R3-R5-R6, the old path is torn down.

After the old path for LSP-1 is torn down, the new path is established on R1-R3-R5-R6.

LSP-1 will stay on R1-R2-R4-R6 because there is enough bandwidth on the existing path.

LSP-1 will be torn down because CSPF fails to find a new path.

Send a RESV Tear message toward router R6.

Send a RESV Tear message toward router R1.

Send a RESV Error message toward router R6.

Send a RESV Error message toward router R1.

10.32.1.2

10.1.4.78

10.48.1.1

10.1.2.2

The router has new entries added for the given FEC in its LIB.

The router has new entries added for the given FEC in its FIB.

The router generates a single label for the given FEC and advertises it to all its peers,

The router has multiple LSP tunnels for the given FEC.