4A0-C01 Exam Dumps - Nokia SRC Certification Questions and Answers

VPN-IFV4 allows multiple customers to have overlapping IP addresses.

CE routers use VPN-IPv4 prefixes to differentiate between services.

PE routers are responsible for creating VPN-IPv4 prefixes.

A VPN-IFV4 prefix is composed of a route distinguisher (RD) and an IPv4 address.

Mirror slicing is used to logically separate a port that is being monitored.

Mirror slicing configuration is earned out in the mirror destination.

By default, mirror slicing is enabled so that only the protocol headers of data traffic are replicated to a mirror port.

The maximum number of mirror slices that can be made on a network and access port are 256 and 8, respectively

The service label is swapped for a transport label during transport.

The transport label is used to forward packets between PEs.

The service label is used to identify which VPRN a packet belongs to.

Labels are initially added at the ingress PE.

1/1/1:200.*

1/1/1:*.33

1/1/1:*.*

This requires two SAPs: 1/1/1:200.33 and 1/1/1:250.33

A-pipe

E-pipe

I-pipe

F-pipe

C-pipe

VPRN is an IP service that connects multiple sites in a single routed domain over the provider-managed IP/MPLS network.

Each VPRN consists of a set of customer sites that must connect to the same PE router

In a VPRN service, each customer router becomes a routing peer to other customer routers

VPRN provides customer routers with transparent IP connectivity without knowledge of the MPLS core

The IES's interface must be an IGP peer with the CE.

The IES must use an IP address that is different than the C£.

The IES can only include one SAP for the CE.

The IES must include a network port.