4A0-C01 Exam Dumps - Nokia SRC Certification Questions and Answers

The frame is dropped.

The service ID is added as the provider VLAN tag.

A VLAN tag of 0 is added as the provider VLAN tag.

The frame is forwarded with no provider VLAN tag.

R1, R2, and R4 can be PLRs; R6 is the MP.

R1, R2, and R4 can be PLRs; R2, R4, and R6 are MPs.

R1, R2, R3, R4, and R5 can be PLRs; R6 is the MP.

R1, R2, R3. R4, and R5 can be PLRs; R2, R4, and R6 is the MP.

10.10.10.2

10.10.10.3

10.10.10.4

10.10.10.6

There is no ASBR configured in the network.

Layer 3 direct Internet access service.

Layer 2 point-to-point service.

Layer 2 multipoint-to-multipoint service.

Layer 3 IP multipoint-to-multipoint VPN service.

show service id 5

show service ies

show service service-using ies

show service id 5 base

The router must also have an active static route to the next-hop specified in the static route command.

The system address of the next-hop router must be included in the static route command.

The command option "indirect" must be used in the static-route command.

The system address of the router connected to the destination must be included in the static route command

ping static 10.5.5.5

ping static 0.0.0.0/0

ping 10.5.5.5

ping 0.0.0.0

Convergence is triggered when the adjacency between routers R1 and R2 drops as a result of Hello timeouts. At this point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent routers. Once the process is complete for all routers, the networks have converged.

Convergence is triggered when the physical interfaces between routers R1 and R2 go down. At this point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent routers. Once the process is complete for all routers, the networks have converged.

Convergence will not be triggered because switches cannot run routing protocols between them.

Convergence is triggered when the switches notify the routers about the link state information. At this point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent routers. Once the process is complete for all routers, the networks have converged

Convergence is triggered when an LSA is sent from router R1 to router R2 to indicate that the link is down. At this point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent routers. Once the process is complete for all routers, the networks have converged.

0

1

2

3

4

The router's system address.

The next-hop prefix.

The interface's global prefix.

The next-hop system address.