Create the user named jeff, marion, harold
Answer and Explanation:
1.useradd jeff
2.useradd marion
3. useradd harold
useradd command is used to create the user. All user’s information stores in /etc/passwd and user;s shadow password stores in /etc/shadow.
Your System is going to use as a Router for two networks. One Network is 192.168.0.0/24 and Another Network is 192.168.1.0/24. Both network’s IP address has assigned. How will you forward the packets from one network to another network?
Answer and Explanation:
1.echo “1” >/proc/sys/net/ipv4/ip_forward
2.vi /etc/sysctl.conf
net.ipv4.ip_forward = 1
If you want to use the Linux System as a Router to make communication between different networks, you need enable the IP forwarding. To enable on running session just set value 1 to /proc/sys/net/ipv4/ip_forward. As well as automatically turn on the IP forwarding features on next boot set on /etc/sysctl.conf file.
You are working as a System Administrator at Certpaper. Your Linux Server crashed and you lost every data. But you had taken the full backup of user’s home directory and other System Files on /dev/st0, how will you restore from that device?
Answer and Explanation:
1. Go to on that directory where you want to restore.
2. restore –rf /dev/st0
To restore from backup we use the restore command. Here backup will restore from /dev/st0 on current Directory.
Add a user named user4 and make primarily belongs to training group. As well account should expire on 30 days from today.
Answer and Explanation:
example: usermod -e “12 Feb 2006” user4
Verify: chage –l user4
Install the Redhat Linux RHEL 4 through NFS. Where your Server is server1.example.com having IP 172.24.254.254 and shared /var/ftp/pub. The size of the partitions are listed below:
/1048
/home1028
/boot 512
/var 1028
/usr2048
Swap->1.5 of RAM Size
/archiveconfigure the RAID Level 0 of remaining all free space.
After completing the installation through NFS solve the following questions. There are two networks 172.24.0.0/16 and 172.25.0.0/16. As well as there are two domains example.com on 172.24.0.0/16 network and my133t.org on 172.25.0.0/16 network. Your system is based on example.com domain.
Answer and Explanation:
1. Insert the CD on CD-ROM and start the system.
2. In Boot: Prompt type linux askmethod
3. It will display the language, keyboard selection.
4. It will ask you for the installation method.
5. Select the NFS Image from the list
6. It will ask the IP Address, Net mask, Gateway and Name Server. Select Use
Dynamic IP Configuration: because DHCP Server will be configured in your exam lab.
7. It will ask for the NFS Server Name and Redhat Enterprise Linux Directory.
Specify the NFS Server: 172.24.254.254
Directory: /var/ftp/pub
8. After Connecting to the NFS Server Installation start in GUI. Go up to the partition screen by selecting the different Options.
9. Create the partition According to the Question because Size and what-what partition should you create at installation time is specified in your question
10.Create the two RAID partitions having equal size of remaining all free space.
11.Click on RAID button
12.Type mount point /archive
13.Select RAID Level 0
14.Click on ok
15. Then select the MBR Options, time zone and go upto package selections.
It is another Most Important Time of installation. Due to the time limit, you should care about the installation packages. At Exam time you these packages are enough.
X-Window System
GNOME Desktop
(these two packages are generally not required)
Administration Tools.
System Tools
Windows File Server
FTP Servers
Mail Servers
Web Servers
Network Servers
Editors
Text Based Internet
Server Configuration Tools
Printing Supports
When installation will complete, your system will reboot. Jump for another Question.
Create the user named user1, user2, user3
Answer and Explanation:
We create the user using useradd command and we change the password of user using passwd command. If you want to set the blank password use: passwd -d username.
Create the group named sysadmin.
Answer and Explanation:
1.groupadd sysadmin
groupadd command is used to create the group and all group information is stored in /etc/group file.
There is a HTTP server 192.168.0.254 and all required packages are dumped in /var/www/html/rhel4 of that server. Install the Redhat Enterprise Linux 5 by creating following partitions:
/1000
/boot200
/home1000
/var1000
/usr4000
swap2X256 (RAM SIZE)
Answer and Explanation:
Note: Examiner will provide you the Installation startup CD. And here mentioned size may vary see on the exam paper.
1.Insert the CD on CD-ROM and start the system.
2.In Boot: Prompt type linux askmethod
3. It will display the Language, keyboard selection.
4. It will ask you for the installation method.
5. Select the HTTP from the list
6. It will ask the IP Address, Net mask, Gateway and Name Server. Select Use
Dynamic IP Configuration: because DHCP Server will be configured in your exam lab.
7. It will ask for the Web site name and Redhat Enterprise Linux Directory.
Specify the HTTP Server: 192.168.0.254
Directory: rhel4 Because Default Directory for http is /var/www/html
8. After Connecting to the HTTP Server Installation start. Go upto the partition screen by selecting the different Options.
9. Create the partition According to the Question because Size and what-what partition should you create at installation time is specified in your question
10. Then select the MBR Options, time zone and go upto package selections.
It is another Most Important Time of installation. Due to the time limit, you should be
care about the installation packages. At Exam time you these packages are enough.
X-Window System
GNOME Desktop
(these two packages are generally not required)
Administration Tools.
System Tools
Windows File Server
FTP Servers
Mail Servers
Web Servers
Network Servers
Editors
Text Based Internet
Server Configuration Tools
Printing Supports
When installation will complete, your system will reboot. Jump for another Question.
Successfully resolv to server1.example.com where your DNS server is 172.24.254.254
Answer and Explanation:
nameserver 172.24.254.254
On every clients, DNS server is specified in /etc/resolv.conf. When you request by name it tries to resolv from DNS server .
Your System is configured in 192.168.0.0/24 Network and your nameserver is 192.168.0.254. Make successfully resolve to server1.example.com.
Answer and Explanation:
Very Easy question, nameserver is specified in question,
1.vi /etc/resolv.conf
nameserver 192.168.0.254
2.host server1.example.com
TESTED 22 Feb 2025
