Winter Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: bigdisc65

RCDD-002 Exam Dumps - BICSI RCDD Certification Questions and Answers

Question # 24

You are designing a multi-story dwelling and need to place the CTR's. Every floor is not available. What is the alternate spacing for the CTRs?

Options:

A.

Every 2 floors

B.

Every 3 floors

C.

Every 4 floors

D.

Every 5 floors

E.

1st floor and midway up through the height of the building

Buy Now
Question # 25

When designing a campus distribution system involving small buildings with only one horizontal cross-connect (HC) [Floor distributor (FD)] per building, you can eliminate the need for a(n):

Options:

A.

Intermediate cross-connect (IC) Building distributor (BD)

B.

Main cross-connect (MC) Campus distributor (CD)

C.

Horizontal cross-connect (HC) Floor distributor (FD)

D.

Entrance facility (EF)

E.

Latching connector (LC)

Buy Now
Question # 26

Multimode optical fiber is generally used for campus or building applications due to the ability to use cost effective:

Options:

A.

Connectors

B.

Cable

C.

Installation methods

D.

Transceivers

E.

Designs

Buy Now
Question # 27

You are designing a system requiring the transmission of data. Your system must perform higher than ________ kHz in order to do so.

Options:

A.

4

B.

8

C.

10

D.

16

E.

32

Buy Now
Question # 28

It is important to keep all underfloor cabling systems very neat and orderly. Cabling systems must be managed to ensure that air flow is not impeded by the height or volume of underfloor cabling. Keeping copper communications cabling properly separated from is one design approach. To resolve this:

Options:

A.

Power cabling should be routed in the space below the floor in either hot or cold aisle

B.

Route the copper cables in the cold aisle and route the power cabling in the hot aisle

C.

Power cabling should be routed in the overhead space

D.

Route the copper cables in the hot aisle and route the power cabling in the cold aisle

E.

Copper cabling can be routed in either hot or cold aisles without any consequence in performance of the network

Buy Now
Question # 29

You have just finished a design calling for 15 telecommunications outlets. You received word that the owner has increased his requirements by 40%. What size commercial DD (distribution device) is required to accommodate the increase?

Options:

A.

660 mm (26 in)

B.

1015 mm (40 in)

C.

1346 mm (53 in)

D.

1676 mm (66 in)

Buy Now
Question # 30

Which class of the system was created to secure a single equipment room (ER)?

Options:

A.

Class 1

B.

Class 2

C.

Class 3

D.

Class 4

Buy Now
Question # 31

Which one of the following is part of the security metric to consider in selecting the appropriate labels for an administrative system?

Options:

A.

Tamper resistance

B.

Smudge resistance

C.

Temperature rating

D.

Adhesive type

E.

Moisture content

Buy Now
Question # 32

Color codes for cross-connections fields have been used for many years. Which color is used to identify campus backbone?

Options:

A.

Brown

B.

Blue

C.

Green

D.

Purple

E.

White

Buy Now
Question # 33

You are designing multi band UHF police radio and VHF fire radio systems for a municipal office. Because of the closeness of the transmit and receive frequencies, you must ensure there is adequate filtering and gain control of the systems. Which device will best meet the ability to separate and control the transmit and receive signals?

Options:

A.

Bidirectional amplifier

B.

Transceiver

C.

Repeater

D.

Unidirectional amplifier

Buy Now
Exam Code: RCDD-002
Exam Name: BICSI Registered Communications Distribution Designer - RCDD
Last Update: Feb 5, 2025
Questions: 361
RCDD-002 pdf

RCDD-002 PDF

$29.75  $84.99
RCDD-002 Engine

RCDD-002 Testing Engine

$33.25  $94.99
RCDD-002 PDF + Engine

RCDD-002 PDF + Testing Engine

$47.25  $134.99