ISO-22301-Lead-Auditor Exam Dumps - PECB ISO 22301 Questions and Answers

The act step in the PDCA cycle validates improvements by taking actions to address any gaps, nonconformities, or opportunities for improvement identified in the check step. The act step also involves reviewing the effectiveness of the actions taken and determining whether further improvement is possible or necessary. The act step closes the PDCA cycle and leads to a new plan step for the next cycle of continual improvement. The act step is one of the key requirements of ISO 22301, as it demonstrates theorganization’s commitment to enhance its business continuity capability and performance. References: ISO 22301 Auditing eBook, page 10 1; ISO 22301:2019, clause 0.3 2

Performance evaluation is the BCMS process that analyzes the adequacy of the business continuity capability using defined targets and performance indicators. It involves monitoring, measuring, analyzing, and evaluating the BCMS performance and effectiveness, as well as conducting internal audits and management reviews. Performance evaluation helps to identify the strengths and weaknesses of the BCMS, as well as the opportunities for improvement and corrective actions. Performance evaluation is one of the key requirements of ISO 22301, as it demonstrates the organization’s commitment to continual improvement and customer satisfaction. References: ISO 22301 Auditing eBook, page 19 1; ISO 22301:2019, clause 9 2

An unambiguous objective is one that is concise and unequivocal, meaning that it is clear, precise, and leaves no room for doubt or confusion. An unambiguous objective is important for business continuity management, as it helps to ensure that the organization and its stakeholders have a common understanding of what is expected and how to measure the progress and achievement of the objective. An unambiguous objective also helps to avoid misunderstandings, conflicts, or disputes that may arise from vague or ambiguous objectives. According to ISO 22301, business continuity objectives should be consistent with the business continuity policy, measurable, monitored, communicated, and updated as appropriate. They should also be SMART: Specific, Measurable, Achievable, Relevant, and Time-based. These criteria help to ensure that the objectives are unambiguous and effective. References: ISO 22301 Auditing eBook, Chapter 2: Business Continuity Management System (BCMS), Section 2.2: Business Continuity Policy, page 25. ISO 22301 Auditing eBook, Chapter 2: Business Continuity Management System (BCMS), Section 2.3: Business Continuity Objectives, page 26.

 According to ISO 22301 Lead Auditor objectives and content, the communication structure for managing information between various groups of stakeholders in the organization should include both internal and external communication. Internal communication refers to the exchange of information and messages within the organization, such as between employees, managers, and business continuity teams. External communication refers to the exchange of information and messages with parties outside the organization, such as customers, suppliers, regulators, media, and the public. Both types of communication are essential for ensuring the effective operation of the business continuity management system (BCMS) and the successful response and recovery from disruptions. The communication structure should be aligned with the organization’s communication strategy, which should identify the communication needs, define the communication channels, and establish the communication procedures for the BCMS. The communication structure should also consider the unique communication requirements that may arise during a disruption, such as timely and accurate information, alternative communication channels, and managing rumours and misinformation. References: ISO 22301 Auditing eBook, page 291; ISO 22301 Clause 7.4 Communication2

Reviewing is the stage that helps management to define where focus and resources should be invested. According to ISO 22301, reviewing is the process of evaluating the performance and effectiveness of the business continuity management system (BCMS) and identifying opportunities for improvement. Reviewing can be done through internal audits, management reviews, performance evaluations, and corrective actions. Reviewing can help management to ensure that the BCMS is aligned with the organization’s strategic objectives, meets the needs and expectations of interested parties, complies with the applicable requirements, andcontinually improves its resilience and capability to respond to disruptive incidents. References: ISO 22301 Auditing eBook, page 171; ISO 22301:2019, clause 92

The clarify and confirm step is the first step of the audit planning process, where the auditor clarifies the requirements with the business leads, such as the audit client, the auditee, and the audit team. The purpose of this step is to ensure that the audit objectives, scope, criteria, and deliverables are clearly defined, understood, and agreed upon by all the parties involved. The clarify and confirm step also involves the identification of the audit risks, opportunities, and resources, as well as the establishment of the audit communication channels and protocols. The clarify and confirm step is essential to ensure that the audit is aligned with the expectations and needs of the stakeholders, and that the audit is feasible, effective, and efficient. References:

• PECB Certified ISO 22301 Lead Auditor eLearning Training Course1, Module 4: Preparation of an ISO 22301 audit, Lesson 4.1: Audit planning, Slide 5: Audit planning process
• ISO 22301 Auditing eBook2, Chapter 4: Preparation of an ISO 22301 audit, Section 4.1: Audit planning, Subsection 4.1.1: Clarify and confirm

The step that collates and validates all resource requirements of the selected continuity solutions is the compile step. This step involves gathering all the information about the resources needed to implement and operate the continuity solutions, such as human resources, equipment, facilities, materials, suppliers, partners, etc. The compile step also involves verifying that the resource requirements are realistic, feasible, and consistent with the organization’s objectives, policies, and budget1.

References: 1: ISO 22301 Auditing eBook, Chapter 6: Business Continuity Strategy, Section 6.2: Continuity Solutions, Subsection 6.2.4: Compile, Page 88.

 A control is a measure that is implemented to reduce or eliminate the risk from occurring, or to mitigate the impact of the risk if it occurs. A control can be preventive, corrective, or detective, depending on the stage of the risk management process. A control can also be administrative, technical, or physical, depending on the nature of the risk and the organization. A control can be designed, implemented, monitored, and evaluated based on the risk assessment and the risk treatment plan. A control can be documented in the business continuity policy, objectives, plans, procedures, and other relevant documents. A control can be audited to verify its effectiveness and efficiency in achieving the intended outcomes. References:

• PECB Certified ISO 22301 Lead Auditor eLearning Training Course1, Module 3: Fundamental principles and concepts of a business continuity management system (BCMS), Lesson 3.2: Business continuity management system (BCMS), Slide 15: Risk management
• ISO 22301 Auditing eBook2, Chapter 3: Fundamental principles and concepts of a business continuity management system (BCMS), Section 3.2: Business continuity management system (BCMS), Subsection 3.2.4: Risk management

The Statement of Applicability (SOA) is a document that identifies the applicable requirements of ISO 22301 and explains how they are addressed by the organization’s Business Continuity Management System (BCMS). The SOA is prepared during the planning phase of the PDCA cycle, as part of the process of establishing the BCMS scope, objectives, and policy. The SOA is based on the results of the business impact analysis, risk assessment, and risk treatment, and it provides a rationale for the inclusion or exclusion of each requirement. The SOA also helps to demonstrate the conformity of the BCMS with the standard and to communicate the BCMS scope and objectives to interested parties. References: ISO 22301:2019, Clause 6.1.3; ISO 22301 Auditing eBook, Chapter 4.2.2.

The Check phase of the PDCA cycle is the phase that determines potential issues pertaining to the management of the BCMS. The Check phase involves monitoring and evaluating the performance and effectiveness of the BCMS and identifying any gaps, nonconformities, risks, or opportunities for improvement. The Check phase also involves collecting and analyzing data and information related to the BCMS, such as the results of audits, reviews, tests, exercises, surveys, and feedback. The Check phase provides valuable input for the Act phase, where corrective and preventive actions are taken to address the issues and improve the BCMS. References: : ISO 22301 Auditing eBook, page 11 : ISO 22301:2019, clause 9.1 : Business continuity and ISO 22301 - Qudos : ISO 22313:2020(en), Security and resilience ? Business continuity …