The following description of the BYOD networking of large enterprises is wrong?
When using omnidirectional antenna coverage outside the WLAN, it is recommended to hang the antenna higher than 12m to avoid tree blockage.
In some special environments, more APs need to be used, and the channels cannot be completely separated. Therefore, you can consider reducing the transmit power of the AP to reduce the letter.
Interference between the numbers.
In the ACU2 solution of an independent AC board of a WLAN campus network project, the switch where the board is located and the ACU2 board are logically two independent networks.
Yuan, that is, an independent management device.
Regarding the deployment of the AP9330DN room division program, which of the following factors need to be considered?
How many dB of directional antenna attenuation is the main lobe width of the phenomenon?
Assume that the Root AP is installed on a 30-meter tower with coordinates (0m, 0m), and four Leaf APs are at (200m, 100m).
(200m, 0m), (800m, 400m) and (1000m, 0m) in the four positions of the 7-meter pole, all equipment used
AP6510DN, and the antenna is the same. Each Leaf AP requires 1 Mbps of bandwidth and the local EIRP is unlimited.
Which of the following antennas is optimal for a Root AP?
TESTED 05 Feb 2025
