PDF C_S43_2022 Study Guide

After a maintenance order is technically completed, the responsible person can perform the following operations1:

• Lock or unlock the order: This prevents or allows further changes to the order data, such as actual costs, settlement rule, or confirmation data.
• Change the settlement rule: This allows the responsible person to adjust the distribution of costs to the relevant receivers, such as cost centers, assets, or orders.
• Post goods movements: This allows the responsible person to record the consumption or return of materials that were used for the maintenance work.
• Enter measurement documents: This allows the responsible person to record the measurement readings of the technical objects that were maintained.

The responsible person cannot perform the following operations after a maintenance order is technically completed1:

• Update the estimated costs: This is only possible before the order is released or during the execution phase.
• Change the planned costs: This is only possible before the order is released or during the execution phase.
• Change the order type: This is only possible before the order is released.
• Change the order status: This is only possible before the order is technically completed or after it is reversed.

Therefore, the correct answers are A and C. References: 1: Maintenance Order Types | SAP Help Portal

To set up Inspection Checklist processing, you need to customize the following settings:

• Maintain settings at plant level for usage decisions. This is required to define the default values for the usage decision codes and the follow-up actions for the inspection lots. You can do this by using the customizing activity ‘Default Setting at Plant Level’ under 'Quality Management→Quality Inspection→Inspection Lot Completion→Maintain Default Values for Usage Decisions’1.
• Assign an Inspection Type to a Maintenance Order Type and a Planning Plant. This is required to enable the creation of inspection lots for the maintenance orders. You can do this by using the customizing activity ‘Assign Inspection Type to Maintenance Order Type’ under 'Plant Maintenance and Customer Service→Maintenance and Service Processing→Maintenance and Service Orders→Functions and Settings for Order Types→Assign Inspection Type to Maintenance Order Type’2.

You do not need to create a control key which expects inspection characteristic assignments or assign an Inspection Type to a Maintenance Order Type only. These are not relevant settings for the Inspection Checklist processing. References:

• Set up your SAP S/4HANA system for EAM Inspection Checklists
• Explaining Inspection Checklists - SAP Learning

The Report Malfunction app allows the maintenance technician to perform the following steps when reporting a malfunction of a technical object:

• Display the current location of the technical object. The app shows the geographical location of the technical object on a map, if the Geographical Enablement Framework is activated. This helps the technician to locate the technical object and plan the travel route1
• Add a URL to provide further information. The app allows the technician to attach a URL to the malfunction report, such as a link to a video or a website that shows the problem or the solution. This helps the technician to provide additional information and documentation for the malfunction1
• View details of the technical object by navigating to the Asset Viewer. The app allows the technician to access the Asset Viewer app from the malfunction report, where they can view the technical object details, such as the structure, documents, history, and measurements. This helps the technician to gather information about the technical object and its condition1

The Report Malfunction app does not allow the maintenance technician to perform the following steps when reporting a malfunction of a technical object:

• Select and print the maintenance order shop papers. The app does not provide the option to select and print the maintenance order shop papers. The technician can use a different app, such as “Manage Maintenance Orders”, to print the shop papers2
• Input estimated costs for repair malfunction. The app does not provide the option to input estimated costs for repair malfunction. The technician can use a different app, such as “Manage Maintenance Orders”, to enter the planned costs for the maintenance order2

References: 1: Report and Repair Malfunction | SAP Help Portal 2: Manage Maintenance Orders | SAP Help Portal