Legit 4A0-C01 Exam Download

Convergence is triggered when the adjacency between routers R1 and R2 drops as a result of Hello timeouts. At this point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent routers. Once the process is complete for all routers, the networks have converged.

Convergence is triggered when the physical interfaces between routers R1 and R2 go down. At this point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent routers. Once the process is complete for all routers, the networks have converged.

Convergence will not be triggered because switches cannot run routing protocols between them.

Convergence is triggered when the switches notify the routers about the link state information. At this point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent routers. Once the process is complete for all routers, the networks have converged

Convergence is triggered when an LSA is sent from router R1 to router R2 to indicate that the link is down. At this point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent routers. Once the process is complete for all routers, the networks have converged.

ping static 10.5.5.5

ping static 0.0.0.0/0

ping 10.5.5.5

ping 0.0.0.0

The router is an ABR.

The router is an ASBR.

The router is at the end of a virtual link.

The router's interface is in a stub area.

OSPF uses TCP, so the protocol number is 6.

OSPF uses UDP, so the protocol number is 17.

OSPF does not use IP.

OSPF has its own protocol number of 89.