SRC Certification 4A0-C01 Book

Mirror slicing is used to logically separate a port that is being monitored.

Mirror slicing configuration is earned out in the mirror destination.

By default, mirror slicing is enabled so that only the protocol headers of data traffic are replicated to a mirror port.

The maximum number of mirror slices that can be made on a network and access port are 256 and 8, respectively

The frame is dropped.

The service ID is added as the provider VLAN tag.

A VLAN tag of 0 is added as the provider VLAN tag.

The frame is forwarded with no provider VLAN tag.

The labels are of local significance only, so other routers can use the same value.

10.10.10.1 has yet to send its own unique label.

Router R4 is using the same tunnel to send and receive to 10.10.10.1.

The service on 10.10.10.1 is down, so it is rejecting packets.

The service label is swapped for a transport label during transport.

The transport label is used to forward packets between PEs.

The service label is used to identify which VPRN a packet belongs to.

Labels are initially added at the ingress PE.