Full Access Huawei H12-831_V1.0 Tutorials

Page: 14 / 24

Question 56

There are multiple types of MAC address entries on a switch. Which of the following entries are manually configured and cannot be aged out?

Options:

MUX MAC address entries

Static MAC address entries

Dynamic MAC address entries

Blackhole MAC address entries

Question 57

As shown in the figure, OSPF is enabled on all interfaces of the router. Which of the following statements is correct?

Options:

R2in the area0generated inTypel LSAcontains10.0.2.2/32routing information

R2in the area0generated inType5 LSAcontains10.0.2.2/32routing information

R2in the area0generated inType2 LSAcontains10.0.2.2/24routing information

R2in the area0generated inType3 LSAcontains10.0.2.2/32routing information

Question 58

On the OSPF network shown in the figure, the cost values of links are marked, and OSPF IP FRR is enabled on R1. Which of the following statements are true?

Options:

No backup path can be established between R1 and 10.0.3.3/32.

If SI is powered off, R1 directly uses the backup path to forward packets to R3.

If BFD (with default detection parameters) is enabled on the entire network and the link between R2 and SI is disconnected, R1 can quickly detect the OSPF adjacency fault.

If the link between R1 and SI is disconnected, R1 directly uses the backup path to forward packets to R3.

Question 59

As its network scale expands, an enterprise plans to move scattered servers to the same equipment room for unified management. During hardware migration, network engineers do not need to perform device commissioning and therefore do not need to work out a migration solution.