Huawei H12-831_V1.0 Questions Answers

Page: 22 / 24

Question 88

Regarding the MPLS forwarding process, the description of Ingress node forwarding is correct:

Options:

IngressAfter the node receives the data packet, it will first checkILMlooking forTunnel ID

existIPThe obtained label is pressed into the packet, and according to theQoSPolicy processingEXRSimultaneous processingL,,Then the packagedMPLSThe packet is sent to the next hop

according toILMtableTunnel IDfind the correspondingNHLFEentry, willLFIBentry andNHLFEtable entry

CheckNHLFETable entry, you can get outbound interface, next hop, outbound label and label operation type The label operation type isPush

Question 89

Regarding the BGPI MPLS IPVPN network architecture, which of the following descriptions is wrong?

Options:

PThe device only needs to have the basicM PLSForwarding capability, not maintainedVPNRelated Information

between sites viaVPNMutual visits, a site can only belong to1indivualVPN

In general,CEThe device does not perceiveVPNexistence, andCEDevice does not require supportMPLS,MP-BGP

Wait

BGP/MPLS IP VPNnetwork architecture byCE(CustomerEdge).PE(ProviderEdge)and P( Provider)consists of three parts, includingPEandPis operator equipment,CEYesBGP/MPLS IPVPNUser settings prepare

Question 90

A campus has deployed IPv6 for service testing. There are 4 routers in the network, running 0SPFv3 to implement IPv6 network interconnection. As shown in the figure, an engineer checked the LSDB of R2 and intercepted one of the Link-LSAs. Which of the following statements is true about the description of this LSA?

Options:

The router that generates this LSA is R2 port R2 connected

IPv6 address prefix for GEO/0/0: 2001:DB8:2345:23::/64

The link-local address of R2 interface GEO/0/0 is: FE80::2E0:FCFF:FEC, D:4F79

The SA shows 2 does not support external routing, but participates in IPv6 routing calculation

Question 91

On the ISIS network shown in the figure, R1 imports a default route using the default-route-advertise always level-1 command. In this case, R3 can learn this default route through IS-IS.