vyatta@VYA1:~$ show ip route
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
> - selected route, * - FIB route, p - stale info
Gateway of last resort is 172.24.42.1 to network 0.0.0.0
S *> 0.0.0.0/0 [1/0] via 172.24.42.1, eth0
C *> 127.0.0.0/8 is directly connected, lo
C *> 172.24.42.0/24 is directly connected, eth0
O 192.168.12.0/24 [110/1] is directly connected, eth2, 00:02:53
C *> 192.168.12.0/24 is directly connected, eth2
O 192.168.13.0/24 [110/1] is directly connected, eth3, 00:02:53
C *> 192.168.13.0/24 is directly connected, eth3
O *> 192.168.23.0/24 [110/2] via 192.168.12.2, eth2, 00:01:31
*> [110/2] via 192.168.13.3, eth3, 00:01:31
O 192.168.101.0/24 [110/1] is directly connected, eth1, 00:02:53
C *> 192.168.101.0/24 is directly connected, eth1
O *> 192.168.128.0/24 [110/2] via 192.168.12.2, eth2, 00:01:10
O *> 192.168.129.2/32 [110/11] via 192.168.12.2, eth2, 00:01:10
O *> 192.168.130.2/32 [110/11] via 192.168.12.2, eth2, 00:01:10
O *> 192.168.131.2/32 [110/11] via 192.168.12.2, eth2, 00:01:10
O *> 192.168.160.0/24 [110/2] via 192.168.13.3, eth3, 00:01:31
O *> 192.168.161.3/32 [110/11] via 192.168.13.3, eth3, 00:01:31
O *> 192.168.162.3/32 [110/11] via 192.168.13.3, eth3, 00:01:31
O *> 192.168.163.3/32 [110/11] via 192.168.13.3, eth3, 00:01:31
vyatta@VYA1:~$
Which three routes will the device originate into the OSPF network? (Choose three.)
vyatta@VYA1# show int eth eth0
address 172.16.32.99/24
duplex auto
hw-id 00:0c:29:bf:5c:1b
smp_affinity auto
speed auto
[edit]
vyatta@VYA1#
Which two commands will activate OSPF on the interface shown? (Choose two.)
Which three commands can display rule details, such as protocols and ports? (Choose three.)
Which two show commands will verify that a Brocade Vyatta vRouter upgrade completed successfully? (Choose two.)