170-010 Exam Dumps - Brocade Converged Questions and Answers

vyatta@VYA1# show int eth eth0

address 172.16.32.99/24

duplex auto

hw-id 00:0c:29:bf:5c:1b

smp_affinity auto

speed auto

[edit]

vyatta@VYA1#

Which two commands will activate OSPF on the interface shown? (Choose two.)

vyatta@VYA1:~$ show ip route

Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP

O - OSPF, IA - OSPF inter area

N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

E1 - OSPF external type 1, E2 - OSPF external type 2

i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area

> - selected route, * - FIB route, p - stale info

Gateway of last resort is 172.24.42.1 to network 0.0.0.0

S *> 0.0.0.0/0 [1/0] via 172.24.42.1, eth0

C *> 127.0.0.0/8 is directly connected, lo

C *> 172.24.42.0/24 is directly connected, eth0

O 192.168.12.0/24 [110/1] is directly connected, eth2, 00:02:53

C *> 192.168.12.0/24 is directly connected, eth2

O 192.168.13.0/24 [110/1] is directly connected, eth3, 00:02:53

C *> 192.168.13.0/24 is directly connected, eth3

O *> 192.168.23.0/24 [110/2] via 192.168.12.2, eth2, 00:01:31

*> [110/2] via 192.168.13.3, eth3, 00:01:31

O 192.168.101.0/24 [110/1] is directly connected, eth1, 00:02:53

C *> 192.168.101.0/24 is directly connected, eth1

O *> 192.168.128.0/24 [110/2] via 192.168.12.2, eth2, 00:01:10

O *> 192.168.129.2/32 [110/11] via 192.168.12.2, eth2, 00:01:10

O *> 192.168.130.2/32 [110/11] via 192.168.12.2, eth2, 00:01:10

O *> 192.168.131.2/32 [110/11] via 192.168.12.2, eth2, 00:01:10

O *> 192.168.160.0/24 [110/2] via 192.168.13.3, eth3, 00:01:31

O *> 192.168.161.3/32 [110/11] via 192.168.13.3, eth3, 00:01:31

O *> 192.168.162.3/32 [110/11] via 192.168.13.3, eth3, 00:01:31

O *> 192.168.163.3/32 [110/11] via 192.168.13.3, eth3, 00:01:31

vyatta@VYA1:~$

Which three routes will the device originate into the OSPF network? (Choose three.)

vyatta@Vyatta1:~$ show firewall name PublicServers statistics

IPv4 Firewall "PublicServers":

Active on (eth0,IN)

rule packets bytes action source destination

---- ------- ----- ------ ------ -----------

10 210 15960 ACCEPT 10.2.3.0/24 10.6.7.0/24

20 40827 2731049 ACCEPT 10.4.5.0/24 10.6.7.0/24

30 69381 4192375 REJECT 10.4.5.0/24 10.6.7.0/24

40 89538 5366257 ACCEPT 0.0.0.0/0 10.6.7.0/24

10000 82866 5289591 DROP 0.0.0.0/0 0.0.0.0/0

Based on the output shown, which statement is true about this firewall configuration?

VLAN 10 is configured on ethernet 0.

Which command line will display operational statistics for the VLAN?

vyatta@training:~$ show system commit

0 2013-05-03 21:07:54 by root via boot-config-loader

1 2013-05-03 00:05:32 by vyatta via cli

2 2013-05-02 23:15:23 by vyatta via cli

3 2013-04-08 17:57:48 by root via boot-config-loader

4 2013-03-12 18:08:45 by vyatta via cli

5 2013-01-22 22:56:04 by vyatta via cli

6 2012-11-04 02:36:36 by root via boot-config-loader

7 2012-10-12 16:15:36 by vyatta via cli

8 2012-10-11 16:23:08 by vyatta via cli

9 2012-09-10 18:51:06 by vyatta via cli

10 2012-09-04 23:56:28 by vyatta via cli

11 2012-08-31 23:25:35 by vyatta via cli

12 2012-08-31 23:08:05 by vyatta via cli

13 2012-08-31 23:07:32 by vyatta via cli

14 2012-08-31 23:06:56 by vyatta via cli

15 2012-08-31 03:38:53 by vyatta via cli

16 2012-08-31 03:37:15 by vyatta via cli

17 2012-08-31 03:03:53 by vyatta via cli

18 2012-06-22 04:58:47 by vyatta via cli

19 2012-06-20 19:48:08 by vyatta via cli

vyatta@training:~$

Based on the output, which two statements about this Brocade Vyatta vRouter are true? (Choose two.)

Which command line will configure the OSPF router ID?

Which two show commands will verify that a Brocade Vyatta vRouter upgrade completed successfully? (Choose two.)

vyatta@vyatta:~$ show system login users

Username Type Tty From Last login

operator vyatta hvc0 Mon Jun 17 18:34:25 2013

vyatta vyatta pts/0 10.224.7.101 Wed Jun 19 20:47:39 2013

vyatta@vyatta:~$

Based on the output, which statement is true?

By default, what information is stored in the Brocade Vyatta vRouter system log? (Choose two.)

vyatta@vyatta:~$ show dhcp server leases

IP address Hardware Address Lease expiration Pool Client Name

---------- ---------------- ---------------- ---- -----------

10.224.7.40 00:04:f2:02:84:49 2013/06/22 17:46:20 ClientLAN

10.224.7.41 d4:be:d9:1b:ed:9e 2013/06/22 20:27:26 ClientLAN PC-HR-34

vyatta@vyatta:~$ show dhcp server statistics

pool pool size # leased # avail

---- --------- -------- -------

ClientLAN 11 2 9

vyatta@vyatta:~$

Based on the output shown, which statement is true?