CFPS Exam Dumps - NFPA Fire Protection Specialist Questions and Answers

OSHA regulation 1910.110 addresses storage and handling of liquefied petroleum gas (LPG). This regulation covers the general requirements for the design, construction, installation, operation, inspection, and maintenance of LPG systems, including containers, piping, valves, fittings, regulators, burners, and appliances. The regulation also specifies the safety precautions and procedures for the prevention of fire and explosion hazards involving LPG. The regulation applies to all employers who store, handle, or use LPG in their workplaces.References:

• OSHA: 1910.110 - Storage and handling of liquefied petroleum gases1
• Nebula Safety: Storage & Handling of Liquefied Petroleum Gases (LPGs)2

Smoke detector

Explore

The smoke detector type that contains a small amount of radioactive material and functions by sensing a decrease in conductance of the air when smoke particles enter the chamber is theionization smoke detector. Ionization smoke detectors use a small amount of americium-241, a radioactive element, to ionize the air molecules inside a sensing chamber. This creates a low-level electric current between two electrodes. When smoke enters the chamber, it disrupts the ionized air and reduces the current flow. This triggers the alarm to sound.Ionization smoke detectors are more sensitive to small particles of smoke, such as those produced by flaming fires1.However, they may also be more prone to false alarms from cooking or steam, and they require proper disposal of the radioactive source2.

References:

• Smoke Detector Types: Which Type of Smoke Detector Is Best? - X-Sense
• How Does Your Smoke Detector Work? - ThoughtCo

Process safety is the type of process hazard analysis program that addresses the prevention of flammable and hazardous materials released from containment. Process safety is a discipline that focuses on the prevention and control of incidents that have the potentialto cause catastrophic consequences involving fire, explosion, or toxic release. Process safety involves the application of engineering and management principles, criteria, and techniques to identify, understand, and control process hazards. Process safety covers many aspects of a process, such as design, operation, maintenance, inspection, testing, and emergency response.

References: Process hazard analysis - Wikipedia1; What does the OSHA standard, - Occupational Safety and Health Administration2; Fire Protection Handbook, 20th Edition, Volume 1, Chapter 8, Section 8.3.13.

The minimum width of a doorway in a means of egress to accommodate a person in a wheelchair is 32 inches (813 mm).This is based on the requirements of the Americans with Disabilities Act (ADA) and the International Building Code (IBC), which both specify that doors in a path of egress and doors on an accessible route must have a clear opening width of at least 32 inches (813 mm)12. This width allows enough space for a person in a wheelchair to maneuver through the doorway without difficulty. A wider doorway may be preferable for some types of wheelchairs or other assistive devices, but 32 inches (813 mm) is the minimum standard for accessibility and safety.References:DECODED: Calculating the Egress Width of Door Openings - I Dig Hardware;Digital Codes.

Fire pump

Explore

Typical fire pump drivers reach maximum brake horsepower (BHP) between 140% and 170% of rated capacity, depending on the type and size of the pump. This means that the driver must be able to provide enough power to operate the pump at its peak efficiency point, which is usually beyond the rated capacity. The rated capacity is the flow rate at which the pump is designed to deliver a certain pressure, as specified by NFPA 20, Standard for the Installation of Stationary Pumps for Fire Protection. The maximum BHP is the highest power output required by the pump at any point on its performancecurve. The driver must be sized to match the maximum BHP of the pump, with some allowance for service factor and safety margin.References:Understanding the Basics of Fire Pumps | Pumps & Systems;How are Engines and Motors Sized for Fire Pumps?; NFPA 20, Standard for the Installation of Stationary Pumps for Fire Protection, 2023 Edition, Chapter 4, Section 4.7.

Spontaneous combustion is the exception to the requirement of a combustible material, an oxidizing agent, and an ignition source for combustion to take place. Spontaneous combustion is a phenomenon in which a material can ignite without any external heat or flame, due to a chemical reaction within the material that generates enough heat to reach the ignition temperature. Spontaneous combustion can occur in certain materials that are prone to self-heating, such as oily rags, hay, coal, and compost. Spontaneous combustion is a type of smoldering combustion, which is a slow, low-temperature, flameless form of combustion.References:

• Fire Protection Handbook, 20th Edition, Volume 1, Chapter 2, Section 2.2.1.11
• NFPA 921: Guide for Fire and Explosion Investigations, 2021 Edition, Section 4.3.12

A proprietary fire alarm system is a type of fire alarm system that transmits signals that are permanently recorded at a constantly attended supervising station located either at the protected premises or at another location of the property owner. A proprietary fire alarm system is owned and operated by the property owner or the owner’s agent. A proprietary fire alarm system is intended to provide fire alarm service to a single property or a campus of related properties.References:

• NFPA 72: National Fire Alarm and Signaling Code, 2019 Edition, Section 3.3.105.11
• Fire Protection Handbook, 20th Edition, Volume 1, Chapter 7, Section 7.2.1.12

25%

Explosions or fires from flammable gas or oil fuel vapor-air mixtures may be prevented by ventilation and controls that keep the flammable vapor content below 25% of the lower flammable limit (LFL) of the vapor-air mixture, according to the web search results. The LFL is the lowest concentration of a gas or vapor in air that can produce a flash of fire in the presence of an ignition source. Below the LFL, the mixture is too lean to burn. The LFL varies for different gases and vapors, and it is usually expressed as a percentage by volume of air at 25°C and atmospheric pressure. For example, the LFL of methane is 4.4%, which means that a mixture of methane and air with less than 4.4% methane cannot ignite. To prevent explosions or fires, the concentration of flammable gases or vapors should be kept below 25% of their LFL, which is equivalent to 1.1% methane in this case. Ventilation, natural or mechanical, is one of the methods to achieve this by diluting the flammable gases or vapors with fresh air.Controls, such as gas detectors, alarms, valves, and interlocks, are another method to monitor and regulate the flammable gas or vapor levels and prevent them from reaching dangerous concentrations1234

The duration of required fire flow in public supply systems depends on the type of occupancy, construction, and exposure of the building, as well as the availability and reliability of the water supply. According to NFPA 1, Fire Code, Table 18.4.5.1.2, the minimum duration of fire flow for most occupancies ranges from 1 to 4 hours, with some exceptions for high-rise buildings, health care facilities, and special hazards. The fire flow duration is intended to provide enough water for fire suppression and exposure protection until the fire is under control or extinguished.References: NFPA 1, Fire Code, 2023 Edition, Section 18.4.5.1.2 and Table 18.4.5.1.2; NFPA Fire Protection Handbook, 21st Edition, Chapter 9, Section 9.2.2.

Wet chemical extinguishing agents, such as potassium acetate and potassium citrate, when sprayed on a grease fire, extinguish the fire by smothering and cooling. The wet chemical agent reacts with the hot grease and forms a layer of soap-like foam on the surface of the fat, which acts as an insulation between the hot grease and the atmosphere, preventing the escape of combustible vapors and oxygen supply.The wet chemical agent also absorbs heat from the grease and lowers its temperature below the ignition point12

References:

• What is the Difference Between a Wet and Dry Chemical Fire …
• Wet Chemical (Class K) Fire Extinguisher - Portable - WFX