4A0-C02 Exam Dumps - Nokia SRC Certification Questions and Answers

1536

1514

14%

1492

1488

The primary VRF on PE1 contains routes learned from spoke sites.

All traffic between spoke sites must pass through CE1.

The secondary VRF on PE1 is used to route data packets from the hub CE to the spoke sites.

PE1 advertises the primary VRF routes to CE1.

The route-distinguisher value must be 64496:10 for successful VPRN operation.

An export policy is not required for successful VPRN operation.

The "family vpn-ipv4" command is required under the BGP configuration for successful VPRN operation.

The neighbor address should be 10.10.10.4 under the BGP configuration for successful VPRN operation.

The VPRN configuration on ASBR1 is correct.

PE1 advertises the Red VPN routes and a default route to PE3.

The Internet VRF on PE3 imports the Red VPN routes advertised by PE1.

PE1 imports all Internet routes and advertises them to CE1 via the Red VRF.

PE3 advertises a default route from its Internet VRF instead of advertising all Internet routes.

Spanning tree must be enabled within the VPLS.

Spanning tree BPDUs must be untagged.

Spanning tree BPDUs must be tagged.

Spanning tree must be disabled within the VPLS.

VPLS 100 was not actually configured as a management VPLS.

VPLS 10 and VPLS 20 are not actually configured as a user VPLS.

VPLS 10 and VPLS 20 are not using the same spoke-sdps that the management VPLS is using.

Based on the output there is now way of telling if there is a problem with the configuration.

Ring topologies.

Metro-to-metro topologies

H-VPLS topologies.

Partial-mesh topologies.

The IOM3 adds more memory to both forwarding complexes which increases the total number of queues available.

The IOM3 only contains a single forwarding complex which reduces the number of queues used.

The IOM3 allows multiple forwarding classes to be assigned to a single queue.

The IOM3 allows queues to be dynamically allocated between ingress and egress.

The IOM3 has a larger CPU capable of tracking active hardware queue utilization and adjusting memory allocation accordingly.

Option A

Option B

Option B

Option C

Option E

100

1

25

250