4A0-101 Exam Dumps - Nokia SRC Certification Questions and Answers

The router has a system interface, two point-to-point interfaces and one broadcast interface.

The router has a system interface, two passive interfaces, two point-to-point interfaces and one broadcast interface.

The router has a system interface, two point-to-point interfaces and one virtual link.

The router has a system interface, two passive interfaces, two point-to-point interfaces and one virtual link.

Router R2 to router R8 will follow (R2-R3-R5-R7-R8). Router R8 to R2 will follow (R8-R7-R5-R3-R2)

Router R2 to router R8 will follow (R2-R3-R4-R6-R7-R8). Router R8 to R2 will follow (R8-R7-R6-R4-R3-R2)

Router R2 to router R8 will follow (R2-R3-R5-R7-R8). Router R8 to R2 will follow (R8-R7-R6-R4-R3-R2)

Router R2 to router R8 will follow (R2-R3-R4-R6-R7-R8) Router R8 to R2 will follow (R8-R7-R5-R3-R2)

Level 2 routers interconnect the Level 1 areas.

There must be a contiguous Level 2 backbone to enable routing throughout the entire network.

Level 1 routers send packets to the nearest L1/L2 router if the destination is in a different area

Level 2 routers store the Level 1 and Level 2 topology information in a single database.

'asbr' is missing from router R1's configuration.

Router R1 needs to have an export policy added to it.

Router R5 does not have an export policy for these prefixes.

Router R1 needs to have an import policy added to it.

The route policy should be applied as an import policy.

The route policy should say "from protocol isis" instead of "from protocol direct".

The ASBR configuration should be removed.

The interface between routers R1 and R3 must be in OSPF area 0.

To reduce the size of each routing update.

To allow interoperability between routing protocols.

To allow different subnet masks for different subnets.

To reduce the size of the routing table.

Router R3 will install the OSPF route in its routing table.

Router R3 will install the IS-IS route in its routing table

Router R3 will install an OSPF route and an IS-IS route in its routing table.

There is not enough information to answer the question.

Default path

Default gateway

Gateway path

Proxy ARP

Full; both routers are exchanging Helios to maintain the adjacency.

The adjacency is down.

The adjacency is in exstart state.

The adjacency is in the exchange state.

True

False