Weekend Special 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: Board70

350-501 Exam Dumps - Cisco CCNP Service Provider Questions and Answers

Question # 124

Refer to the exhibit.

A network engineer at a large ISP Is configuring telemetry streams to monitor the health status of PE routers on the network using gRPC dial-out. The PE routers are located at several data centers in different physical locations, and they are using IS-IS and BGP for routing. Which additional configuration must the engineer implement on the PE routers to meet the goal?

Options:

A.

Text, letter Description automatically generated

B.

Text Description automatically generated

C.

Graphical user interface, text Description automatically generated

D.

Text, letter Description automatically generated

Buy Now
Question # 125

Which feature describes the weight parameter for BGP path selection?

Options:

A.

Its value is local to the router

B.

Its value is set either locally or globally.

C.

Its default value is 0.

D.

Its value is global to the router.

Buy Now
Question # 126

Refer to the exhibit. Routers R1 through R5 are being deployed within the core of a service provider running BGP The core supports distribution of VPNv4 routes using MPLS. R3 currently has multiple paths to reach R4. A network engineer must implement BGP attributes so that R3 can reach R4 via R1. Which action must the engineer take to meet the requirement?

Options:

A.

Configure R3 so the route to R4 through R1 will have a higher weight than the route from R2 or R5.

B.

Configure R2 to send the route from R4 to R1 using a higher metric than what is advertised to R3.

C.

Configure R5 to send the route from R4 to R1 using a longer AS path than the AS path that it receives from R1 or R2.

D.

Configure R3 so the route to R4 through R1 will have a lower local preference than the route from R2 or R5

Buy Now
Question # 127

Refer to the exhibit:

Which statement describes this configuration?

Options:

A.

Router 1 has its running configuration locked so changes can be made only when the administrator issues a kill session

B.

Router 1 can be remotely managed by the CLI using Telnet

C.

Router 1 has a new data store to collect SNMP information, but configuration must still be done at the CLI only

D.

Router 1 has a temporary data store where a copy of the running configuration can be manipulated and verified before committing the configuration

Buy Now
Question # 128

What is a characteristic of data modeling language?

Options:

A.

It provides an interface for state data.

B.

It separates configuration and state data.

C.

It ensures devices are individually configured.

D.

It replaces SNMP.

Buy Now
Question # 129

Refer to me exhibit.

Refer to the exhibit. A network engineer notices PE-21 convergence degradation due to the growing LSDB size of Level 2 areas in the network. The engineer decides to migrate router PE-21 from an inter-area design to an intra-area implementation. Inter-area routing must be accomplished via an ATT-bit set by the Level 1/Level 2 router. Which configuration must the engineer implement on PE-21 to complete the migration?

Options:

A.

configure terminal

router isis 1

no net 49.0200

net 49.5000

is-type level-1-2

end

B.

configure terminal

router isis 1

net 49.5000.0100.1202.0021.00

is-type level-1-2

end

C.

configure terminal

router isis 1

net 49.5000.0100.1222.0022.00

is-type level-1

end

D.

configure terminal

router isis 1

no net 49.0200.0100.1202.0021.00

net 49.5000.0100.1202.0021.00

is-type level-1

end

Buy Now
Question # 130

Refer to the exhibit. A network engineer received a complaint about these problems in OSPF stub area 100:

  • The Ethernet link is down between routers RX and RY because the fiber was cut.
  • CE site A traffic to the hub site is being dropped.

Which action resolves these issues?

Options:

A.

Set the OSPF authentication type to MD5 between RX and RY DUMPS

B.

Change the OSPF area 100 type to stub on RZ.

C.

Change the OSPF priority to 100 on the interfaces that connect RX and RY.

D.

DUMPS Set the OSPF MTU to 1500 on the link between RX and RZ.

Buy Now
Question # 131

What is a role of NSO?

Options:

A.

It automates the deployment of access points with its built-in wireless LAN controller.

B.

It manages WAN infrastructure using a virtual switch.

C.

It provides full lifecycle management of a device.

D.

It resides on a hypervisor that runs the Windows OS.

Buy Now
Question # 132

Refer to the exhibit. A network engineer configures CPE-1 for QoS with these requirements:

IPv4 and IPv6 traffic originated by the CPE-1 WAN IP address must be marked with DSCP CS3.

IPv4 LAN traffic must be marked with DSCP CS1.

IPv6 LAN traffic must be marked with DSCP default.

Which configuration must the engineer implement on CPE-1?

Options:

A.

class-map match-any SELF_TRAFFIC

match access-group name SELF_V4

match access-group name SELF_V6

class-map match-all V4_ TRAFFIC

match protocol ip

class-map match-all V6_TRAFFIC

match protocol ipv6

class-map match-all QG_4

match qos-group 4

class-map match-all QG_6

match qos-group 6

!

policy-map LAN-INPUT

class V4_TRAFFIC

set qos-group 4

class V

B.

class-map match-all SELF_TRAFFIC

match access-group name SELF_V4

match access-group name SELF_V6

class-map match-all V4_ TRAFFIC

match protocol ip

class-map match-all V6_TRAFFIC

match protocol ipv6

class-map match-all QG_4

match qos-group 4

class-map match-all QG_6

match qos-group 6

!

policy-map LAN-INPUT

class V4_TRAFFIC

set qos-group 4

class V

C.

class-map match-all SELF_TRAFFIC

match access-group name SELF_V4

match access-group name SELF_V6

class-map match-all V4_ TRAFFIC

match protocol ip

class-map match-all V6_TRAFFIC

match protocol ipv6

class-map match-all QG_4

match qos-group 4

class-map match-all QG_6

match qos-group 6

!

policy-map LAN-INPUT

class V4_TRAFFIC

set qos-group 4

class V

D.

class-map match-any SELF_TRAFFIC

match access-group name SELF_V4

match access-group name SELF_V6

class-map match-all V4_ TRAFFIC

match protocol ip

class-map match-all V6_TRAFFIC

match protocol ipv6

class-map match-all QG_4

match qos-group 4

class-map match-all QG_6

match qos-group 6

!

policy-map LAN-INPUT

class V4_TRAFFIC

set qos-group 4

class V

Buy Now
Question # 133

Refer to the exhibit:

It the NetFlow configuration is updated to version 9, which additional piece of information can be reported"?

Options:

A.

IPv6 flow information

B.

flow sequence numbers

C.

BGP AS information

D.

IPv4 flow information

Buy Now
Exam Code: 350-501
Exam Name: Implementing and Operating Cisco Service Provider Network Core Technologies (350-501 SPCOR)
Last Update: Feb 23, 2025
Questions: 452
350-501 pdf

350-501 PDF

$28.5  $94.99
 Add to Cart
350-501 Engine

350-501 Testing Engine

$33  $109.99
 Add to Cart
350-501 PDF + Engine

350-501 PDF + Testing Engine

$43.5  $144.99
 Add to Cart