156-315.81 Exam Dumps - Checkpoint CCSE R81 Questions and Answers

Check Point security components are divided into the following components: GUI Client, Security Management, Security Gateway. GUI Client is the graphical user interface that allows administrators to configure, manage, and monitor Check Point products and security policies. Security Management is the server that stores and enforces the security policies and provides logging and reporting functions. Security Gateway is the device that inspects and filters network traffic according to the security policies. 

Gateway API is NOT an example of a Check Point API. Check Point API is a general term that refers to various application programming interfaces (APIs) that allow external applications to interact with Check Point products and services using standard methods such as HTTP(S) requests and JSON objects. There are several types of Check Point APIs, such as Management API, Threat Prevention API, OPSEC SDK, etc. Management API is an API that allows external applications to configure, manage, and monitor Check Point management server using web services. Threat Prevention API is an API that allows external applications to send files or URLs to Check Point Threat Prevention products for scanning and analysis using web services. OPSEC SDK is an API that allows external applications to integrate with Check Point OPSEC products using C/C++ libraries and protocols. Gateway API is not a valid or existing type of Check Point API.

The Access Control policy supports two policy layers. These are the Network layer and the Application & URL Filtering layer. The Network layer contains rules that control the network traffic based on the source, destination, service, and action. The Application & URL Filtering layer contains rules that control the application and web access based on the application, site category, and user identity12.

The Access Control policy can also use inline layers, which are sub-policies that are embedded within a rule. Inline layers allow more granular control over specific traffic or scenarios, such as VPN, Mobile Access, or different user groups13. However, inline layers are not considered as separate policy layers, but rather as extensions of the parent rule4.

Therefore, the correct answer is A. The Access Control policy supports two policy layers.

References:

• 1, Policy Layers in R80.x - Check Point CheckMates
• 2, Access Control policies, layers, and rules | Check Point Firewall …
• 3, Chapter 8: Introduction to Policies, Layers, and Rules - Check Point …
• 4, Creating an Access Control Policy - Check Point Software

According to the Check Point Resource Library, the minimum amount of RAM needed for a Threat Prevention Appliance is 4 GB. This applies to both physical and virtual appliances. The other options are either incorrect or irrelevant. References: Check Point Resource Library

 Identity Awareness AD-Query is using the Microsoft WMI API to learn users from AD. WMI stands for Windows Management Instrumentation, and it is an API that allows remote management and monitoring of Windows systems. Identity Awareness AD-Query is a feature that enables the Security Gateway to query Active Directory servers for user and computer information, such as login events, group membership, and IP addresses. By using the WMI API, Identity Awareness AD-Query can receive real-time notifications from Active Directory servers without installing any agents or scripts on them. 

 In ClusterXL Load Sharing Multicast Mode, every member of the cluster receives all of the packets sent to the cluster IP address. This mode uses multicast MAC addresses to distribute packets to all cluster members. Each member decides whether to accept or reject the packet based on a load balancing algorithm. This mode provides better performance and scalability than Unicast mode, but requires a switch that supports multicast MAC addresses. 

 The number of cores that can be used in a Cluster for Firewall-kernel on the new device with 4 cores is 4. Cluster is a feature that allows two or more Security Gateways to provide high availability and load balancing for network traffic. Firewall-kernel is a component of the Security Gateway that performs packet inspection according to security policies. The number of cores that can be used for Firewall-kernel in a Cluster depends on the number of cores available on each device in the Cluster. The Cluster will use the lowest common denominator of cores among all devices in the Cluster for Firewall-kernel. Therefore, if one device has 2 cores and another device has 4 cores, the Cluster will use 2 cores for Firewall-kernel on each device. However, if both devices have 4 cores, the Cluster will use 4 cores for Firewall-kernel on each device.

 According to the Check Point website, Vanessa needs to fill in the following details in the System Restore window before she can click OK button and test the backup: Server, Protocol, Username, Password, Path, Comment, All Members. These details specify the source and destination of the backup file, as well as the scope of the restore operation. The other options are either missing or incorrect details. References: System Restore

The command migrate import can be used to restore a backup of Check Point configurations without the OS information. This command imports the configuration from a file that was created using the migrate export command, which backs up only the Check Point configuration and not the OS settings. The other commands are either not valid or not suitable for restoring a backup without the OS information. References: Check Point R81 Installation and Upgrade Guide

The fw tab -s command lists all tables in Gaia. The fw tab command displays information about the firewall tables, such as connections, NAT translations, SAM rules, etc. The -s option shows a summary of all tables. References: fw tab - Check Point Support Center

 To ensure that VMAC mode is enabled, the CLI command that should be run on all cluster members is fw ctl get int fwha_vmac_global_param_enabled; result of command should return value 1. VMAC mode is a feature that allows ClusterXL to use virtual MAC addresses for cluster interfaces, instead of physical MAC addresses. This improves the failover performance and compatibility of ClusterXL with switches and routers. To check if VMAC mode is enabled, the command fw ctl get int fwha_vmac_global_param_enabled can be used, which returns 1 if VMAC mode is enabled, and 0 if VMAC mode is disabled. 

 Gateway API is not an example of a Check Point API. Check Point APIs are interfaces that enable interactions with Check Point products using automation scripts or external applications. The examples of Check Point APIs are Management API, OPSEC SDK, Threat Prevention API, Identity Awareness Web Services API, and others4. Gateway API is not a valid Check Point API name. References: Check Point R81 Security Management Administration Guide, Check Point APIs

Wire Mode is a VPN-1 NGX feature that enables VPN connections to successfully fail over, bypassing Security Gateway enforcement. This improves performance and reduces downtime. Based on a trusted source and destination, Wire Mode uses internal interfaces and VPN Communities to maintain a private and secure VPN session, without employing Stateful Inspection. Since Stateful Inspection no longer takes place, dynamic-routing protocols that do not survive state verification in non-Wire Mode configurations can now be deployed. The VPN connection is no different from any other connections along a dedicated wire, thus the meaning of "Wire Mode".

References: VPN Administration Guide

The Check Point TE appliance in Recommended Mode includes 2(OS) images. One image is used for running the appliance, and the other image is used for backup and recovery purposes. The images are not chosen by the administrator during installation, nor based on the license or the latest version. References: [Check Point R81 Threat Emulation Administration Guide]

The cphaconf set_ccp multicast command is used to set the Cluster Control Protocol (CCP) to Multicast mode. This mode allows cluster members to communicate with each other using multicast packets. The other commands are either incorrect or set the CCP to Broadcast mode. References: ClusterXL Administration Guide