101-500 Exam Dumps - LPIC Level 1 Questions and Answers

The content of the kernel ring buffer is reset when the ring buffer is explicitly reset using the command dmesg --clear or when the system is shut down or rebooted. The kernel ring buffer is a portion of the physical memory that holds the kernel’s log messages. It has a fixed size, which means once the buffer is full, the older logs records are overwritten. The dmesg command-line utility is used to print and control the kernel ring buffer in Linux and other Unix-like operating systems1. The dmesg --clear option clears the ring buffer’s contents, which can be useful for debugging purposes or to free up some memory2. The systemshutdown or reboot also clears the ring buffer’s contents, as the physical memory is reset and the kernel is reloaded3.

The other options are false or irrelevant. The ring buffer is not reset when it is read using dmesg without any additional parameters, as this option only displays the current contents of the buffer without modifying them2. The ring buffer is not reset when a configurable amount of time, 15 minutes by default, has passed, as there is no such time limit for the buffer’s persistence4. The ring buffer is not reset when the kernel loads a previously unloaded kernel module, as this action only affects the kernel’s functionality and not its log messages5. References:

• Dmesg Command in Linux | Linuxize1
• dmesg(1) - Linux manual page2
• Linux Dmesg Command Help and Examples - Computer Hope3
• Lockless Ring Buffer Design — The Linux Kernel documentation4
• Linux Kernel Module Management 101 - Linux.com5

UEFI firmware is a software program that provides the interface between the hardware and the operating system on a computer. UEFI stands for Unified Extensible Firmware Interface and it is a replacement for the traditional BIOS (Basic Input/Output System). UEFI firmware has several advantages over BIOS, such asfaster boot times, better security, larger disk support, and graphical user interface. Some of the features of UEFI firmware are12:

• It can use and read certain file systems: UEFI firmware can access files on partitions formatted with FAT12, FAT16, or FAT32 file systems. This allows UEFI to load boot loaders, kernels, and configuration files from these partitions without relying on the legacy MBR (Master Boot Record) or boot sector code. UEFI firmware can also support other file systems, such as NTFS or ext4, with additional drivers.
• It is loaded from a fixed boot disk position: UEFI firmware is stored in a ROM chip on the motherboard, but it also requires a special partition on the boot disk to store additional files and drivers. This partition is called the EFI System Partition (ESP) and it is usually the first partition on the disk. The ESP must have a specific GUID (Globally Unique Identifier) and must be formatted with a FAT file system. The UEFI firmware will look for the ESP on the boot disk and load the files from there.

The other options are false or irrelevant. UEFI firmware does not read and interpret partition tables, it relies on the operating system to do that. UEFI firmware does not store its entire configuration on the /boot/ partition, it stores some of its settings in the NVRAM (Non-Volatile Random Access Memory) on the motherboard and some of its files on the ESP. UEFI firmware is not stored in a special area within the GPT (GUID Partition Table) metadata, it is stored in a ROM chip and an ESP. GPT is a partitioning scheme that supports larger disks and more partitions than the legacy MBR scheme. References:

• Linux Essentials - Linux Professional Institute Certification Programs1
• Exam 101 Objectives - Linux Professional Institute2
• How to Boot and Install Linux on a UEFI PC With Secure Boot3
• How to Access UEFI Settings From Linux - It’s FOSS4
• UEFI firmware updates for linux-surface - GitHub5

The directories on a 64 bit Linux system that typically contain shared libraries are /usr/lib64/ and /lib64/. Shared libraries are binary files that provide reusable functions, routines, classes, data structures, and so on for programs and applications. They are loaded into memory before the program starts and shared by multiple processes that use the same library. Shared libraries are usually stored in standard locations in the file system, such as /usr/lib, /usr/local/lib, /lib, and /lib64 for 32 bit systems, and /usr/lib64, /usr/local/lib64, /lib64, and /lib for 64 bit systems12. The /usr/lib64 and /lib64 directories contain the shared libraries for the system and user applications, respectively. The other directories are either non-existent or do not contain shared libraries. The ~/.lib64/ directory is not a standard location for shared libraries, and it is unlikely that a user would have such a directory in their home directory. The /var/lib64/ directory is also not a standard location for shared libraries, and it is usually used for variable data files that are specific to a package or application. The /opt/lib64/ directory is not a standard location for shared libraries, and it is usually used for optional software packages that are installed in the /opt directory3. References:

• Linux Essentials - Linux Professional Institute Certification Programs1
• Exam 101 Objectives - Linux Professional Institute2
• Understanding Shared Libraries in Linux - Tecmint3

This command redirects the output of ls to standard error, which is file descriptor 2 by default. The syntax of the command is:

ls >& file_descriptor

The ls command is a utility that lists the files and directories in the current working directory or a specified directory. The >& symbol is a redirection operator that redirects the standard output of a command to another file descriptor, which can be a file, a device, or another stream. The file_descriptor is the number of the file descriptor to which the output is redirected.

Therefore, the command ls >&2 will run the ls command and redirect its output to file descriptor 2, which is standard error. This means that the output of ls will not be displayed on the screen, but sent to the standard error stream, which can be used for error handling or logging purposes.

The other commands are incorrect for the following reasons:

• A, ls >-1: This command will not redirect the output of ls to standard error, but it will cause an error. The > symbol is a redirection operator that redirects the standard output of a command to a file or device, overwriting any existing content. The -1 argument is not a valid file name or device name, and it will cause the shell to report an error and exit.
• B, ls <
• D, ls >>2: This command will not redirect the output of ls to standard error, but it will append the output of ls to a file named 2. The >> symbol is a redirection operator that redirects the standard output of a command to a file or device, appending to any existing content. The 2 argument is the name of the file to which the output is appended. If the file does not exist, it will be created. The command will not display anything on the screen, but write the output of ls to the file 2.
• E, ls |error: This command will not redirect the output of ls to standard error, but it will pipe the output of ls to another command named error. The | symbol is a pipe operator that redirects the standard output of one command to the standard input of another command. The error argument is the name of the command that receives the output of ls as its input. However, there is no such command named error in the Linux system, and the shell will report an error and exit.

The stream redirection operators within Bash are used to redirect the input and output of commands to files, devices, or other commands. The valid stream redirection operators within Bash are:

• < : This operator redirects the standard input (STDIN) of a command from a file or device. For example, wc -l < file.txt counts the number of lines in file.txt by using it as the input for the wc command.
• > : This operator redirects the standard output (STDOUT) of a command to a file or device, overwriting any existing content. For example, echo "Hello World" > file.txt writes the string “Hello World” to file.txt, replacing any previous content.
• >> : This operator redirects the standard output (STDOUT) of a command to a file or device, appending to any existing content. For example, echo "Hello World" >> file.txt writes the string “Hello World” to file.txt, without deleting any previous content.
• >& : This operator redirects one file descriptor to another file descriptor. A file descriptor is a number that represents an open file or device. The standard input (STDIN) has the file descriptor 0, the standard output (STDOUT) has the file descriptor 1, and the standard error (STDERR) has the file descriptor 2. For example, command > file 2>&1 redirects both the standard output and standard error of the command to the file.
• <& : This operator redirects one file descriptor from another file descriptor. For example, command <&3 redirects the standard input of the command from the file descriptor 3.

The other operators are not valid stream redirection operators within Bash. They will cause syntax errors or unexpected behavior. For example, #> is a comment followed by a redirection operator, %> is a modulo operator followed by a redirection operator, and >>> is a bitwise right shift operator followed by a redirection operator.

References:

• Redirections (Bash Reference Manual)
• Guide to Stream Redirections in Linux | Baeldung on Linux
• Standard Streams in Bash | Delft Stack
• Bash Tutorial => Redirection
• stream redirection order and what os perform in details

 The find command can be used to search for files and directories that match certain criteria, such as ownership, permissions, size, type, name, etc. The syntax of the find command is:

find [options] [path...] [expression]

The options can modify the behavior of the find command, such as how to handle symbolic links, how to optimize the search, or how to enable debugging. The path argument specifies the starting point of the search, which can be one or more directories. The expression argument consists of one or more tests, actions, and operators that are applied to each file or directory that is found.

The -user test matches files or directories that are owned by a given user. The user can be specified by name or by numeric user ID (UID). The -print action prints the full file name of the matching file or directory on the standard output, followed by a newline. If no action is specified, -print is assumed by default.

Therefore, to list all files and directories within the /tmp/ directory and its subdirectories which are owned by the user root, we can use either of the following commands:

• find /tmp -user root -print
• find /tmp -user root

Both commands will search recursively from the /tmp/ directory and print the full file names of the files or directories that are owned by the user root. The -print action is optional in this case, since it is the default action.

The other commands are incorrect for the following reasons:

• find -path /tmp -uid root : The -path test matches files or directories whose full file name matches the given pattern. This command will not search recursively from the /tmp/ directory, but only match files or directories whose name is exactly /tmp. The -uid test is equivalent to the -user test, but it requires a numeric UID instead of a user name. This command will not match any files or directories, unless there is a file or directory named /tmp that is owned by the user with UID root (which is usually 0).
• find -path /tmp -user root -print : This command has the same problem as the previous one. It will not search recursively from the /tmp/ directory, but only match files or directories whose name is exactly /tmp and are owned by the user root. This command will not match any files or directories, unless there is a file or directory named /tmp that is owned by the user root.
• find /tmp -uid root -print : This command will search recursively from the /tmp/ directory, but it will use the -uid test instead of the -user test. The -uid test requires a numeric UID instead of a user name. This command will match files or directories that are owned by the user with UID root (which is usually 0), but it will not match files or directories that are owned by other users who have the same user name as root (such as root2 or root3).

References:

• find(1) - Linux manual page - man7.org
• How to Use the find Command in Linux - How-To Geek
• find command in Linux with examples - GeeksforGeeks
• find | Microsoft Learn
• Linux Find Command Help and Examples - Computer Hope

The correct answer is C, 2dd. This command will delete two lines, the current and the following line, in vi editor. The syntax of the command is:

[number]dd

The number specifies how many lines to delete, starting from the current line. The dd command deletes the lines and puts them in a buffer, which can be pasted later with the p command. If no number is given, the command will delete only the current line.

The other commands are incorrect for the following reasons:

• A, d2: This command will delete two characters, not two lines. The syntax of the command is:

d[motion]

The motion specifies how many characters to delete, starting from the current cursor position. The 2 motion means two characters to the right. The d command deletes the characters and puts them in a buffer, which can be pasted later with the p command.

• B, 2d: This command is incomplete and will not work. The d command requires a motion argument to specify how many characters to delete. The 2 argument is only a number, not a motion. The command will wait for another keystroke to complete the motion.
• D, dd2: This command will delete the current line and then move the cursor two lines down. The syntax of the command is:

dd[number]

The dd command deletes the current line and puts it in a buffer, which can be pasted later with the p command. The number specifies how many lines to move the cursor down, after deleting the current line. If no number is given, the command will move the cursor to the next line.

• E, de12: This command will delete from the current cursor position to the end of the word, and then move the cursor to the 12th line. The syntax of the command is:

d[motion][number]

The d command deletes the characters specified by the motion and puts them in a buffer, which can be pasted later with the p command. The e motion means the end of the word. The number specifies the line number to move the cursor to, after deleting the characters.

References:

• vi/vim delete commands and examples | alvinalexander.com
• How to Delete Lines in Vim / Vi | Linuxize
• How can I delete multiple lines in vi? - Stack Overflow

 The EFI System Partition (ESP) is a special partition on a disk that contains the UEFI boot loaders, applications and drivers for the installed operating systems. The UEFI firmware will load these files from the ESP when the system boots. The ESP is mandatory for UEFI boot and it is usually formatted with a FAT file system. The ESP is part of the 101.1 Determine and configure hardware settings topic of the LPI Linux Essentials certification program12.

The other options are false or irrelevant. The Linux root file system is not contained on the ESP, it is usually on a separate partition with a Linux file system, such as ext4 or btrfs. The default swap space file is not contained on the ESP, it is usually on a swap partition or a swap file on the Linux root file system. The Linux default shell binaries are not contained on the ESP, they are usually on the /bin directory of the Linux root file system. The user home directories are not contained on the ESP, they are usually on the /home directory of the Linux root file system or on a separate partition. References:

• Linux Essentials - Linux Professional Institute Certification Programs1
• Exam 101 Objectives - Linux Professional Institute2
• EFI system partition - ArchWiki3
• /boot/efi Linux partition: What is, usage recommendations

 The action that ensures that a faulty kernel module is not loaded automatically when the system boots is adding a blacklist line including the name of the offending module to the file /etc/modprobe.d/blacklist.conf. This file contains a list of kernel modules that are prevented from loading by the modprobe command, which is used to load and unload modules from the running kernel. By adding a line like blacklist  to this file, the module will be ignored by modprobe unless it is explicitly specified as aparameter. This way, the module will not be loaded at boot time or by other modules that depend on it. The other options are either invalid or do not affect the automatic loading of the module. Using lsmod --remove --autoclean without specifying the name of a specific module will not work, because lsmod does not have such options and it is only used to display the currently loaded modules. Using modinfo –k followed by the name of the offending module will not work, because modinfo does not have a -k option and it is only used to display information about a module. Using modprobe –r followed by the name of the offending module will only remove the module from the running kernel, but it will not prevent it from loading again at the next boot. Deleting the kernel module’s directory from the file system and recompiling the kernel, including its modules, is a drastic and unnecessary measure that will not only remove the faulty module, but also all other modules in that directory, and it will require a lot of time and expertise to perform. References:

• Linux Essentials - Linux Professional Institute Certification Programs1
• Exam 101 Objectives - Linux Professional Institute2
• Linux Kernel Module Management 101 - Linux.com1
• Chapter 2. Managing kernel modules - Red Hat Customer Portal2

The umask value is a four-digit octal number that determines the default permissions for new files and directories created by a user. The umask value specifies the permissions that are not granted to the user, group, and others. The permissions are represented by three bits for each category, where 1 means execute, 2 means write, and 4 means read. The sum of these values indicates the combination of permissions. For example, 7 means read, write, and execute; 6 means read and write; 5 means read and execute; 4 means read only; 3 means write and execute; 2 means write only; 1 means execute only; and 0 means no permission.

The umask value is subtracted from the maximum permissions for files and directories, which are 666 and 777, respectively. The maximum permissions are then converted to binary and bitwise ANDed with the bitwise complement of the umask value. The result is the default permissions for the new files and directories. For example, if the umask value is 0027, the default permissions for a new file are:

666 - 027 = 639 639 in octal = 110 011 001 in binary 027 in octal = 000 010 111 in binary Bitwise complement of 027 = 111 101 000 in binary 110 011 001 AND 111 101 000 = 110 001 000 in binary 110 001 000 in binary = 608 in octal 608 in octal = rw- — —

The default permissions for a new directory are:

777 - 027 = 750 750 in octal = 111 101 000 in binary 027 in octal = 000 010 111 in binary Bitwise complement of 027 = 111 101 000 in binary 111 101 000 AND 111 101 000 = 111 101 000 in binary 111 101 000 in binary = 750 in octal 750 in octal = rwx r-x —

Therefore, the umask value of 0027 ensures that new files can be read and written by their owning user, and are not accessible at all for everyone else. New directories can be read, written and listed by their owning user, read and listed by their owning group, and are not accessible at all for everyone else.

References:

• Umask command in Linux with examples - GeeksforGeeks
• What Is umask in Linux, and How Do You Use It? - How-To Geek
• What is UMASK and how to set UMASK in Linux/Unix? - Kernel Talks