101-500 Exam Dumps - LPIC Level 1 Questions and Answers

 The correct file permissions that belong to a symbolic link are lrwxrwxrwx. This is because a symbolic link is a special file that points to another file or directory. The first character of the file permissions indicates the file type. The letter l means that the file is a symbolic link. The other letters r, w, and x represent the read, write, and execute permissions for the owner, group, and others classes. However, the permissions of the symbolic link are not used for accessing the file or directory that it points to. The permissions of the target file or directory are used instead. Therefore, the permissions of the symbolic link are usually set to rwx for all classes, meaning that anyone can read, write, or execute the link. The other options are incorrect because they do not indicate the file type of a symbolic link. Option A is wrong because the first character - means that the file is a regular file, not a symbolic link. Option B is wrong because the first character + is not a valid file type indicator. Option D is wrong because the first character s means that the file is a socket, not a symbolic link. References:

• symlink - Change permissions for a symbolic link - Unix & Linux Stack Exchange
• linux - How do file permissions apply to symlinks? - Super User
• Is it possible to change the permissions for the symbolic link?
• Permission through symbolic link - Unix & Linux Stack Exchange
• How to change permissions for a symbolic link under Linux/UNIX

 The common Linux commands for file management are mv, cp and mkdir. The mv command moves or renames files and directories. The cp command copies files and directories. The mkdir command creates directories. The copy and move commands are not valid Linux commands. References:

• LPI Exam 101 Detailed Objectives, Topic 103: GNU and Unix Commands, Weight: 25, Objective 103.1: Work on the command line
• LPI Linux Essentials Study Guide, Chapter 3: Working on the Command Line, Section 3.2: Basic Commands, Page 55

The command mount -a mounts all filesystems that are listed in the file /etc/fstab and have the option auto set. The option auto means that the filesystem can be mounted automatically by the mount -a command or at boot time. The option noauto means that the filesystem can only be mounted explicitly by the mount command with the device or mount point specified12. The file /etc/fstab containsinformation about the filesystems that are known to the system and how they can be mounted3. The command mount -a is useful for mounting all the filesystems that are needed by the system after a change in /etc/fstab or after a reboot4. References: 1: mount(8) - Linux man page 2: Linux mount and umount commands help and examples 3: fstab(5) - Linux man page 4: How to Use the mount Command on Linux

The correct command to make /bin/foo executable by everyone but writable only by its owner is chmod u=rwx,go=rx /bin/foo. This command uses the symbolic method to set the permissions for the user (u), group (g), and others (o) classes. The equal sign (=) means that the permissions are set exactly as specified, not added or removed. The letters r, w, and x represent the read, write, and execute permissions respectively. The comma (,) separates the different classes. The command means that the user has read, write, and execute permissions (rwx), while the group and others have only read and execute permissions (rx). The other options are incorrect because they use the wrong syntax or values for the chmod command. Option B uses the wrong indicators for the classes. The letter o means others, not owner. The letter a means all, not group. Option C uses the numeric method, but the value 577 is not correct. The numeric method uses octal numbers (0-7) to represent the permissions for each class. The first digit is for the user, the second for the group, and the third for others. Each digit is the sum of the values for the read (4), write (2), and execute (1) permissions. For example, 7 means rwx, 6 means rw-, 5 means r-x, and so on. The value 577 means that the user has read, write, and execute permissions (rwx), the group has read and execute permissions (r-x), but the others have only write and execute permissions (w-x), which is not what the question asked. Option D uses the numeric method, but the value 775 is not correct. The value 775 means that the user and the group have read, write, and execute permissions (rwx), while the others have only read and execute permissions (r-x). This means that the group can also write to the file, which is not what the question asked. References:

• [LPI Linux Essentials - 1.3 Basic File Management]
• [LPI Linux Essentials - 2.1 Using Devices, Linux Filesystems, Filesystem Hierarchy Standard]
• [LPI Linux Essentials - 2.2 Mounting, Unmounting Filesystems]
• [LPI Linux Essentials - 2.3 Disk Partitions]
• How to Use the chmod Command on Linux - How-To Geek
• Chmod Command in Linux (File Permissions) | Linuxize
• Chmod command in Linux with examples - GeeksforGeeks

The correct command to locate programs and their corresponding man pages and configuration files is whereis. The whereis command searches for the binary, source, and manual files for a given command name in a list of standard Linux directories. It can also accept a list of directories to search in by using the -B, -M, or -S options. The whereis command is useful for finding the location and documentation of a program. The other commands are not suitable for this task. The dirname command strips the last component from a file name and returns the directory name. The which command shows the full path of a command that is in the $PATH variable. The basename command strips the directory and suffix from a file name and returns the base name. The query command is not a standard Linux command. References:

• [LPI Linux Essentials - 1.1 The Linux Community and a Career in Open Source]
• [LPI Linux Essentials - 1.2 Finding Your Way on a Linux System]
• [LPI Linux Essentials - 1.4 Finding Files]
• whereis command in Linux with Examples - GeeksforGeeks
• Whereis Command in Linux | Linuxize
• Linux whereis Command Explained for Beginners (5 Examples) - HowtoForge
• whereis command | Linux# - Geek University
• whereis command in Linux - LinuxForDevices

The correct command to change the ownership of file.txt to the user dan and the group staff is chown dan:staff file.txt. This command uses the colon (:) as a separator between the user and the group. The other options are incorrect because they use the wrong syntax or options for the chown command.Option A uses a slash (/) instead of a colon, which is not valid. Option C uses the -u and -g options, which are not supported by the chown command. Option D uses the -g option, which only changes the group, not the user. References:

• [LPI Linux Essentials - 1.3 Basic File Management]
• [LPI Linux Essentials - 2.1 Using Devices, Linux Filesystems, Filesystem Hierarchy Standard]
• [LPI Linux Essentials - 2.2 Mounting, Unmounting Filesystems]
• [LPI Linux Essentials - 2.3 Disk Partitions]
• Chown Command in Linux: How to Change File Ownership - phoenixNAP
• chown command in Linux with Examples - GeeksforGeeks
• Chown Command in Linux: How to Use It - Help Desk Geek
• Chown Command in Linux (File Ownership) | Linuxize

The correct command to change the number of days before the ext3 filesystem on /dev/sda1 has to run through a full filesystem check while booting is tune2fs -i 200 /dev/sda1. This command sets the interval between two filesystem checks to 200 days. The tune2fs command allows you to view and change various filesystem parameters on Linux ext2, ext3, or ext4 filesystems. The -i option specifies the time interval between checks. The other options are incorrect because they use the wrong parameters for the tune2fs command. Option A is wrong because the -d option is not supported by the tune2fs command. Option B is wrong because the -c option sets the maximum number of mounts, not days, before a check. Option D is wrong because the -n option is not supported by the tune2fs command. Option E is wrong because the --days option is not supported by the tune2fs command. References:

• [LPI Linux Essentials - 2.2 Mounting, Unmounting Filesystems]
• 15 tune2fs command examples in Linux [Cheat Sheet] - GoLinuxCloud
• Linux tune2fs command With Examples - GeeksforGeeks
• tune2fs command-file system management - Linuxstar
• tune2fs Command Examples - Gianforte School of Computing

 The signal that is sent by the kill command by default is SIGTERM(15). The kill command sends a signal to a process to terminate it. The signal can be specified by name or number as an option to the kill command. If no signal is specified, the default signal is SIGTERM(15), which means terminate. The process can catch this signal and perform any necessary cleanup before exiting. The SIGHUP(1) signal means hang up and is usually sent when the terminal or network connection is disconnected. The SIGQUIT(3) signal means quit and is usually sent when the user presses Ctrl-\ on the keyboard. The SIGKILL(9) signal means kill and is used to force the process to terminate immediately, without any chance to catch the signal or perform any cleanup. References: LPI Exam 101 Detailed Objectives, Topic 103: GNU and Unix Commands, Weight: 25, Objective 103.3: Perform basic file management, kill command, Signal List

The /etc/inittab file is a plain text file that contains information about the initialization process of the system. It defines the default run level, the available run levels, and the actions to be taken when entering or leaving a run level. The default run level is the mode of operation that the system starts up into, and it determines which services and processes are running. The default run level is specified by a line similar to the following in the /etc/inittab file:

id:5:initdefault:

The number after the first colon indicates the default run level, which can range from 0 to 6. The meaning of each run level is:

• 0 — Halt
• 1 — Single-user text mode
• 2 — Not used (user-definable)
• 3 — Full multi-user text mode
• 4 — Not used (user-definable)
• 5 — Full multi-user graphical mode (with an X-based login screen)
• 6 — Reboot

To change the default run level, edit the /etc/inittab file as root and change the number to the desired run level. For example, to change the default run level to 3, use the following command:

sudo nano /etc/inittab

And change the line to:

id:3:initdefault:

Then save and exit the file. The changes will take effect on the next reboot.

References:

• SysV Init Runlevels - Red Hat Customer Portal
• F.4. SysV Init Runlevels - Red Hat Customer Portal
• init - How can I see or change default run level? - Ask Ubuntu

The correct permissions and ownership for the file /etc/passwd are:

B. -rw-r–r-- 1 root root 531 Jun 5 22:45 /etc/passwd

The /etc/passwd file is a plain text-based database that contains information for all user accounts on the system. It is owned by root and has 644 permissions. The file can only be modified by root or users with sudo privileges and readable by all system users. The permissions and ownership of the file are important for the security and functionality of the system. The permissions and ownership of the file can be viewed by using the ls -l command. For example:

ls -l /etc/passwd

The output of the command will show the following information:

-rw-r–r-- 1 root root 531 Jun 5 22:45 /etc/passwd

The first column shows the permissions of the file, which are composed of 10 characters. The first character indicates the file type, which is - for regular files. The next nine characters indicate the permissions for the user (owner), the group, and the others, respectively. Each set of three characters indicates the read ®, write (w), and execute (x) permissions. A dash (-) means no permission. In this case, the permissions are:

• rw- for the user, which means the user can read and write the file, but not execute it.
• r-- for the group, which means the group can only read the file, but not write or execute it.
• r-- for the others, which means the others can only read the file, but not write or execute it.

The second and third columns show the owner and the group of the file, which are both root. The root user is the superuser or the administrator of the system, who has full access and control over the system. The root group is the primary group of the root user, which usually has no other members.

The fourth column shows the size of the file in bytes, which is 531 in this case. The fifth and sixth columns show the date and time of the last modification of the file, which are Jun 5 22:45 in this case. The last column shows the name of the file, which is /etc/passwd in this case.

The other options are not correct because:

• A. -rw------- 1 root root 531 Jun 5 22:45 /etc/passwd: This option has the wrong permissions for the file. The permissions are 600, which means only the user (root) can read and write the file, and the group and the others have no permissions at all. This would prevent the system users from reading the file, which would cause problems for the login process and other utilities that rely on the file.
• C. -rw-r–r-- 1 1 531 Jun 5 22:45 /etc/passwd: This option has the wrong owner and group for the file. The owner and group are both 1, which is the numeric ID of the user and group. However, the numeric ID of the root user and group is 0, not 1. The user and group with the numeric ID of 1 are usually bin, which is a system user and group that own some system binaries and directories. Thebin user and group should not own the /etc/passwd file, as this would compromise the security and functionality of the system.
• D. -rw------- 1 1 531 Jun 5 22:45 /etc/passwd: This option has both the wrong permissions and the wrong owner and group for the file. The permissions are 600, which means only the user can read and write the file, and the owner and group are both 1, which is the numeric ID of the bin user and group. This would prevent the system users from reading the file, and give the bin user and group full access to the file, which would cause problems for the security and functionality of the system.