XK0-005 Exam Dumps - CompTIA Linux+ Questions and Answers

The mv /home/tmp/tempa /home/tmp/temp command will fix the issue of the misnamed directory. This command will rename the directory /home/tmp/tempa to /home/tmp/temp, which is the expected path for users to save their documents. The cp /home/tmp/tempa /home/tmp/temp command will not fix the issue, as it will copy the contents of /home/tmp/tempa to a new file named /home/tmp/temp, not a directory. The cd /temp/tmp/tempa command will not fix the issue, as it will change the current working directory to /temp/tmp/tempa, which does not exist. The ls /home/tmp/tempa command will not fix the issue, as it will list the contents of /home/tmp/tempa, not rename it. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 12: Managing Files and Directories, page 413.

The issue is caused by the server 192.168.168.53 being unreachable. This server is the DNS server configured in the /etc/resolv.conf file, which is used to resolve domain names to IP addresses. The ping command shows that the server cannot be reached, and the nslookup command shows that the name www.comptia.org cannot be resolved using this server. The other options are incorrect because:

The name www.comptia.org does point to a valid IP address, as shown by the nslookup command using another DNS server (8.8.8.8).

The default route is set on the server, as shown by the ip route command, which shows a default gateway of 192.168.168.1.

The network interface eth0 is connected, as shown by the ip link command, which shows a state of UP for eth0. References: CompTIA Linux+ Study Guide, Fourth Edition, page 457-458, 461-462.

The commands nslookup or host can be used to determine whether a hostname is in the DNS. The DNS is the domain name system, which is a service that translates domain names into IP addresses and vice versa. The nslookup command is a tool for querying the DNS and obtaining information about a domain name or an IP address. The host command is a similar tool that performs DNS lookups. Both commands can be used to check if a hostname is in the DNS by providing the hostname as an argument and seeing if the command returns a valid IP address or an error message. For example, the command nslookup www.google.com or host www.google.com will return the IP address of the Google website, while the command nslookup www.nosuchdomain.com or host www.nosuchdomain.com will return an error message indicating that the hostname does not exist. These commands will supply the information that is needed to determine whether a hostname is in the DNS. These are the correct commands to use for this task. The other options are incorrect because they do not query the DNS or obtain information about a hostname (rsync or netstat). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 12: Managing Network Connections, page 378.

The administrator should place the public keys for the server in the ~/.ssh/authorized_keys file. The SSH (Secure Shell) protocol is a method for establishing secure and encrypted connections between remote systems. The SSH protocol supports two types of authentication: password-based and key-based. Password-based authentication requires the user to enter the password of the remote system every time they connect. Key-based authentication requires the user to generate a pair of cryptographic keys: a public key and a private key. The public key is stored on the remote system, while the private key is kept on the local system. The public key and the private key are mathematically related, but not identical. The SSH protocol uses the keys to verify the identity of the user and establish a secure connection without requiring a password. The ~/.ssh/authorized_keys file is a file that contains the public keys of the users who are allowed to connect to the remote system using key-based authentication. The administrator should place the public keys for the server in this file, one per line, and set the appropriate permissions for the file. The administrator should also configure the SSH server to enable key-based authentication by editing the /etc/ssh/sshd_config file and setting the option PasswordAuthentication to no. The administrator should place the public keys for the server in the ~/.ssh/authorized_keys file. This is the correct answer to the question. The other options are incorrect because they are not the standard locations for the public keys for the server (~/.sshd/authkeys, ~/.ssh/keys, or ~/.ssh/keyauth). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 17: Implementing Basic Security, page 513.

The /boot/efi directory is the mount point in a UEFI system. This directory contains the EFI System Partition (ESP), which stores boot loaders and other files required by UEFI firmware. The /sys/efi directory does not exist by default in Linux systems. The /efi directory does not exist by default in Linux systems. The /etc/efi directory does not exist by default in Linux systems. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 11: Managing the Linux Boot Process, page 398.

Comprehensive and Detailed Step-by-Step Explanation:

0 9 * * 6,0 ensures execution at 9:00 AM on Saturdays (6) and Sundays (0).

1-5 would run the script Monday-Friday.

*/3 is incorrect because it runs every three days.

1 * * runs only on the 1st day of each month.

The lsscsi command can list the SCSI devices on the system, along with their size and device name. The -s option shows the size of each device. The administrator can look for the device that has a size of 500G and note its device name. See lsscsi(8) - Linux man page and How to check Disk Interface Types in Linux.References1: https://linux.die.net/man/8/lsscsi2: https://www.golinuxcloud.com/check-disk-type-linux/

An administrator accidentally installed the httpd RPM package along with several dependencies. Which of the following options is the best way for the administrator to revert the package

installation?

dnf clean all

rpm -e httpd

apt-get clean

yum history undo last

Answer: D

The yum history undo last command will undo the last transaction, which in this case is the installation of the httpd RPM package and its dependencies. This will remove the packages that were installed and restore the previous state of the system. See How to undo or redo yum transactions and yum history.References1: https://www.redhat.com/sysadmin/undo-redo-yum-transactions2: https://man7.org/linux/man-pages/man8/yum.8.html#HISTORY

The iptables -F command flushes all the firewall rules, effectively removing them from the system. This command clears out all existing rules from all chains (INPUT, OUTPUT, and FORWARD), leaving the system with no active iptables rules.

The dd command is the most efficient method to clone a partition, as it operates at the block level. The command dd if=/dev/sda1 of=/dev/sdc1 copies the entire content of /dev/sda1 (input file) to /dev/sdc1 (output file), making an exact clone of the partition. The other options are either not applicable or less efficient for partition cloning.

The file command is used to determine the type of a file by examining its contents. It can recognize many different formats, such as text, binary, executable, compressed, image, audio, video, etc. It can also display some additional information about the file, such as encoding, size, dimensions, etc12

References: 1: file(1) - Linux manual page 2: How to use the file command in Linux