SPLK-2002 Exam Dumps - Splunk Enterprise Certified Architect Questions and Answers

Splunk indexing is read/write intensive, as it involves reading data from various sources, writing data to disk, and reading data from disk for searching and reporting. Therefore, it is important to select the appropriate disk storage solution for each deployment, based on the performance, reliability, and cost requirements. The recommended RAID setup for Splunk indexers is RAID 10 (1 + 0), as it provides the best balance of performance and reliability. RAID 10 combines the advantages of RAID 1 (mirroring) and RAID 0 (striping), which means that it offers both data redundancy and data distribution. RAID 10 can tolerate multiple disk failures, as long as they are not in the same mirrored pair, and it can improve the read and write speed, as it can access multiple disks in parallel2

High performance SAN (Storage Area Network) can be used for Splunk indexers, but it is not recommended, as it is more expensive and complex than local disks. SAN also introduces additional network latency and dependency, which can affect the performance and availability of Splunk indexers. SAN is more suitable for Splunk search heads, as they are less read/write intensive and more CPU intensive2

NFS (Network File System) should not be used for storing hot and warm buckets, as it can cause data corruption, data loss, and performance degradation. NFS is a network-based file system that allows multiple clients to access the same files on a remote server. NFS is not compatible with Splunk index replication and search head clustering, as it can cause conflicts and inconsistencies among the Splunk instances. NFS is also slower and less reliable than local disks, as it depends on the network bandwidth and availability. NFS can be used for storing cold and frozen buckets, as they are less frequently accessed and less critical for Splunk operations2

Virtualized environments are not usually preferred over bare metal for Splunk indexers, as they can introduce additional overhead and complexity. Virtualized environments can affect the performance and reliability of Splunk indexers, as they share the physical resources and the network with other virtual machines. Virtualized environments can also complicate the monitoring and troubleshooting of Splunk indexers, as they add another layer of abstraction and configuration. Virtualized environments can be used for Splunk indexers, but they require careful planning and tuning to ensure optimal performance and availability2

A single-site indexer cluster is a group of Splunk Enterprise instances that index and replicate data across the cluster1. A bucket is a directory that contains indexed data, along with metadata and other information2. A replication factor is the number of copies of each bucket that the cluster maintains1. A search factor is the number of searchable copies of each bucket that the cluster maintains1. A searchable copy is a copy that contains both the raw data and the index files3. A search head is a Splunk Enterprise instance that coordinates the search activities across the peer nodes1.

Option D is the correct answer because it reflects the definitions of replication factor and search factor. The cluster will ensure that there are at least three copies of each bucket, one on each peer node, to satisfy the replication factor of 3. The cluster will also ensure that there are at least two searchable copies of each bucket, one primary and one searchable, to satisfy the search factor of 2. The primary copy is the one that the search head uses to run searches, and the searchable copy is the one that can be promoted to primary if the original primary copy becomes unavailable3.

Option A is incorrect because it confuses the replication factor and the search factor. The cluster will ensure there are at least three copies of each bucket, not two, to meet the replication factor of 3. The cluster will ensure there are at least two copies of searchable metadata, not three, to meet the search factor of 2.

Option B is incorrect because it uses the wrong terms. The cluster will ensure there are at least, not at most, three copies of each bucket, to meet the replication factor of 3. The cluster will ensure there are at least, not at most, two copies of searchable metadata, to meet the search factor of 2.

Option C is incorrect because it has nothing to do with the replication factor or the search factor. The cluster does not limit the number of search heads that can access the bucket at the same time. The search head can search across multiple clusters, and the cluster can serve multiple search heads1.

1: The basics of indexer cluster architecture - Splunk Documentation 2: About buckets - Splunk Documentation 3: Search factor - Splunk Documentation

The deployer distributes apps and non-search related and manual configuration file changes to the search head cluster members. The deployer does not bootstrap a clean Splunk install for a search head cluster, as this is done by the captain. The deployer also does not distribute runtime knowledge object changes made by users across the search head cluster, as this is done by the replication factor. For more information, see Use the deployer to distribute apps and configuration updates in the Splunk documentation.

According to the Splunk documentation1, indexer cluster knowledge bundles are the configuration files that the cluster master distributes to the peer nodes as part of the cluster configuration bundle. The knowledge bundles contain the knowledge objects, such as event types, tags, lookups, and so on, that are relevant for indexing and searching the data. The cluster master creates the knowledge bundles by merging the app-name/default and app-name/local directories from the apps that reside on the master node. The cluster master then pushes the knowledge bundles to the peer nodes, where they reside under the $SPLUNK_HOME/var/run directory2. The other options are false because:

• Only app-name/local is pushed. This is false because the cluster master pushes both the app-name/default and app-name/local directories, after merging them, to the peer nodes. The app-name/local directory contains the local customizations of the app configuration, while the app-name/default directory contains the default app configuration3.
• Only app-name/default is pushed. This is false because the cluster master pushes both the app-name/default and app-name/local directories, after merging them, to the peer nodes. The app-name/default directory contains the default app configuration, while the app-name/local directory contains the local customizations of the app configuration3.
• app-name/default and app-name/local are pushed without change. This is false because the cluster master merges the app-name/default and app-name/local directories before pushing them to the peer nodes. This ensures that the peer nodes have the latest and consistent configuration of the apps3.

Adding more search peers and making sure forwarders distribute data evenly across all indexers will provide the most search performance improvement when the distributed deployment is approaching its capacity. Adding more search peers will increase the search concurrency and reduce the load on each indexer. Distributing data evenly across all indexers will ensure that the search workload is balanced and no indexer becomes a bottleneck. Replacing the indexer storage to SSD will improve the search performance, but it is a costly and time-consuming option. Adding more search heads will not improve the search performance if the indexers are the bottleneck. Rescheduling slow searches to run during an off-peak time will reduce the search contention, but it will not improve the search performance for each individual search. For more information, see [Scale your indexer cluster] and [Distribute data across your indexers] in the Splunk documentation.

Setting site=site0 on all Search Head Cluster members disables search site affinity. Search site affinity is a feature that allows search heads to preferentially search the peer nodes that are in the same site as the search head, to reduce network latency and bandwidth consumption. By setting site=site0, which is a special value that indicates no site, the search heads will search all peer nodes regardless of their site. Setting site=site0 does not set all members to dynamic captaincy, enable multisite search artifact replication, or enable automatic search site affinity discovery. Dynamic captaincy is a feature that allows any member to become the captain, and it is enabled by default. Multisite search artifact replication is a feature that allows search artifacts to be replicated across sites, and it is enabled by setting site_replication_factor to a value greater than 1. Automatic search site affinity discovery is a feature that allows search heads to automatically determine their site based on the network latency to the peer nodes, and it is enabled by setting site=auto

The following logs are included in the _introspection index, which contains data that the Splunk Enterprise deployment logs for platform instrumentation:

• disk_objects.log. This log contains information about the disk objects that Splunk creates and manages, such as buckets, indexes, and files. This log can help monitor the disk space usage and the bucket lifecycle.
• resource_usage.log. This log contains information about the resource usage of Splunk processes, such as CPU, memory, disk, and network. This log can help monitor the Splunk performance and identify any resource bottlenecks. The following logs are not included in the _introspection index, but rather in the _internal index, which contains data that Splunk generates for internal logging:
• audit.log. This log contains information about the audit events that Splunk records, such as user actions, configuration changes, and search activity. This log can help audit the Splunk operations and security.
• metrics.log. This log contains information about the performance metrics that Splunk collects, such as data throughput, data latency, search concurrency, and search duration. This log can help measure the Splunk performance and efficiency. For more information, see About Splunk Enterprise logging and [About the _introspection index] in the Splunk documentation.

The following statements describe a search head cluster captain:

• Is the job scheduler for the entire search head cluster. The captain is responsible for scheduling and dispatching the searches that run on the search head cluster, as well as coordinating the search results from the search peers. The captain also ensures that the scheduled searches are balanced across the search head cluster members and that the search concurrency limits are enforced.
• Replicates the search head cluster’s knowledge bundle to the search peers. The captain is responsible for creating and distributing the knowledge bundle to the search peers, which contains the knowledge objects that are required for the searches. The captain also ensures that the knowledge bundle is consistent and up-to-date across the search head cluster and the search peers. The following statements do not describe a search head cluster captain:
• Manages alert action suppressions (throttling). Alert action suppressions are the settings that prevent an alert from triggering too frequently or too many times. These settings are managed by the search head that runs the alert, not by the captain. The captain does not have any special role in managing alert action suppressions.
• Synchronizes the member list with the KV store primary. The member list is the list of search head cluster members that are active and available. The KV store primary is the search head cluster member that is responsible for replicating the KV store data to the other members. These roles are not related to the captain, and the captain does not synchronize them. The member list and the KV store primary are determined by the RAFT consensus algorithm, which is independent of the captain election. For more information, see [About the captain and the captain election] and [About KV store and search head clusters] in the Splunk documentation.

 The algorithm used to determine captaincy in a Splunk search head cluster is Raft distributed consensus. Raft is a consensus algorithm that is used to elect a leader among a group of nodes in a distributed system. In a Splunk search head cluster, Raft is used to elect a captain among the cluster members. The captain is the cluster member that is responsible for coordinating the search activities, replicating the configurations and apps, and pushing the knowledge bundles to the search peers. The captain is dynamically elected based on various criteria, such as CPU load, network latency, and search load. The captain can change over time, depending on the availability and performance of the cluster members. Rapt, Rift, and Round-robin are not valid algorithms for determining captaincy in a Splunk search head cluster

 The following statements are true regarding Splunk Enterprise performance:

• Adding search peers increases the search throughput as search load increases. This is because adding more search peers distributes the search workload across more indexers, which reduces the load on each indexer and improves the search speed and concurrency.
• Adding search heads provides additional CPU cores to run more concurrent searches. This is because adding more search heads increases the number of search processes that can run in parallel, which improves the search performance and scalability. The following statements are false regarding Splunk Enterprise performance:
• Adding search peers does not increase the maximum size of search results. The maximum size of search results is determined by the maxresultrows setting in the limits.conf file, which is independent of the number of search peers.
• Adding RAM to an existing search head does not provide additional search capacity. The search capacity of a search head is determined by the number of CPU cores, not the amount of RAM. Adding RAM to a search head may improve the search performance, but not the search capacity. For more information, see Splunk Enterprise performance in the Splunk documentation.