RH302 Exam Dumps - RedHat RHCE Questions and Answers

Do the following steps as:

1.Use fdisk /dev/hdaTo create new partition.

Type nFor New partition

It will ask for Logical or Primary Partitions. Press l for logical.

It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.

Type the Size: +100MYou can Specify either Last cylinder of Size here.

Press P to verify the partitions lists and remember the partitions name. Default System ID is 83 that means Linux Native.

Type t to change the System ID of partition.

Type Partition Number

Type 82 that means Linux Swap.

Press w to write on partitions table.

Either Reboot or use partprobe command.

mkswap /dev/hda?To create Swap File system on partition.

swapon /dev/hda?To enable the Swap space from partition.

free –mVerify Either Swap is enabled or not.

vi /etc/fstab

/dev/hda?swapswapdefaults0 0

Reboot the System and verify using free command that swap is automatically enabled or not.

Very Tricky question from redhat. Actually question is giving scenario to you to implement quota to neo user. You should apply the quota to neo user on /home that neo user shouldn’t occupied space more than 70K.

1.vi /etc/fstab

LABEL=/home/homeext3defaults,usrquota0 0To enable the quota on filesystem you should mount the filesystem with usrquota for user quota and grpquota for group quota.

2.touch /home/aquota.userCreating blank quota database file.

3.mount -o remount /homeRemounting the /home with updated mount options. You can verify that /home is mounted with usrquota options or not using mount command.

4.quotacheck -u /homeInitialization the quota on /home

5.edquota –u neo /homeQuota Policy editor

See the snapshot

1 Disk quotas for user neo (uid 500):

2 Filesystem blocks soft hard inodes soft hard

4 /dev/mapper/vo-myvol 2 30 70 1 0 0

Can you set the hard limit 70 and soft limit as you think like 30.

Do the following steps as:

Use fdisk /dev/hdaTo create new partition.

Type nFor New partitions

It will ask for Logical or Primary Partitions. Press l for logical.

It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.

Type the Size: +100MYou can Specify either Last cylinder of Size here.

Press P to verify the partitions lists and remember the partitions name.

Press w to write on partitions table.

Either Reboot or use partprobe command.

Use mkfs –t ext3 /dev/hda?

Or

mke2fs –j /dev/hda? To create ext3 filesystem.

vi /etc/fstab

Write:

/dev/hda?/dataext3defaults0 0

11. Verify by mounting on current Sessions also:

mount /dev/hda? /data

In Network problem think to check:

IP Configuration: use ifconfig command either IP is assigned to interface or not?

Default Gateway is set or not?

Hostname is set or not?

Routing problem is there?

Device Driver Module is loaded or not?

Device is activated or not?

Check In this way:

use ifconfig command and identify which IP is assigned or not.

cat /etc/sysconfig/networkWhat, What is written here. Actually here are these parameters.

NETWORKING=yes or no

GATEWAY=x.x.x.x

HOSTNAME=?

NISDOMAIN=?

Correct the file

Use netconfig command

Either Select Automatically from DHCP or assign the static IP

Use service network restart or start command

Now try to ping it will work.

Do the following steps as:

1.Create a partition having size 5 GB and change the syste id ‘8e’.

2.use partprobe command

3.pvcreate /dev/hda9Suppose your partition number is hda9.

4.vgextend test0 /dev/hda9vgextend command add the physical disk on volume group.

5.lvextend –L+5120M /dev/test0/lvtestvolume

6.verify using lvdisplay /dev/test0/lvtestvolume.

Do the following steps as:

1.vi /etc/security/limits.conf

user1hardnproc7

2.vi /etc/pam.d/system-auth

sessionrequired/lib/security/pam_limits.so

To limit the number of process or number of logins, we should configure on /etc/security/limits.conf. First Columns contains the username separated by comma or @group name. Second column either hard or soft limits. Third columns called the item, maxloigns or nproc etc.

To identify the session of users we should call the pam_limits module in /etc/pam.d/system-auth.

Do the following steps as:

1.touch /etc/nologin

2.vi /etc/securetty

comment all available terminall then first.

If /etc/nologin file is created, then pam modules pan_nologin deny to all non-root users to login locally.

/etc/pam.d/login file calls the module.

#%PAM-1.0

auth requiredpam_securetty.so

auth requiredpam_stack.so service=system-auth

auth requiredpam_nologin.so

account requiredpam_stack.so service=system-auth

password requiredpam_stack.so service=system-auth

# pam_selinux.so close should be the first session rule

session requiredpam_selinux.so close

session requiredpam_stack.so service=system-auth

session optionalpam_console.so

# pam_selinux.so open should be the last session rule

session requiredpam_selinux.so multiple open

pam_securetty modules checks the /etc/securetty file, which terminal are available to root. If terminal is not available in this file then pam_securetty module deny to login on unavailable terminal to root user.

Do the following steps as:

1.vi /etc/security/time.conf

login;*;user9|user10;SuMoFri1200-1400

2.vi /etc/pam.d/login

accountrequiredpam_time.so

For Time based authentication, we should configured in /etc/security/time.conf

Syntax of /etc/security/time.conf

services;ttys;users;times

services

is a logic list of PAM service names that the rule applies to.

ttys

is a logic list of terminal names that this rule applies to.

users

is a logic list of users to whom this rule applies.

times

the format here is a logic list of day/time-range entries the days are specified by a sequence of two character entries, MoTuSa for example is Monday Tuesday and Saturday. Note that repeated days are unset MoMo = no day, and MoWk = all weekdays bar Monday. The two character combinations accepted are

Mo Tu We Th Fr Sa Su Wk Wd Al

the last two being week-end days and all 7 days of the week respectively. As a final example, AlFr means all days except Friday.

pam_time modules checks the file /etc/security/time.conf for authentication. So, we should call the pam_time modules in /etc/pam.d/login.

Do the following steps as:

1.vi /etc/mail/local-host-names

example.com

2.vi /etc/mail/sendmail.mc

dnl # DEAMON_OPTIONS(`Port=smtp,Addr=127.0.0.1,Name=MTA`)dnl

3.m4 /etc/mail/sendmail.mc >/etc/mail/sendmail.cf

4.vi /etc/mail/access

RELAY

example.comRELAY

5.service sendmail start | restart

6.chkconfig dovecot on

7.vi /etc/dovecot.conf

protocols = pop3 pop3s

8.service dovecot start | restart

9.chkconfig dovecot on

/etc/mail/local-host-names file contains the aliases to hostname. Mail server program reads the /etc/mail/sendmail.cf. To change the configuration on mail server, we should edit the /etc/mail/sendmail.mc file and should generate the sendmail.cf using m4 command.

By default sendmail server allows to connect to local host only. So we should edit the /etc/mail/sendmail.mc file to allow connect to other hosts.

By default sendmail server will not forward mail. we should specify on /etc/mail/access to relay or to block mail coming from domain or network or individual email address.

By default dovecot service start only the imap protocol. To start pop protocol with dovecot, we should write in /etc/dovecot.conf file.

Do the following steps as:

1.vi /etc/security/time.conf

login;*;user1|user2|user3;Al0900-1700

2.vi /etc/pam.d/login

accountrequiredpam_time.so

For Time based authentication, we should configured in /etc/security/time.conf

Syntax of /etc/security/time.conf

services;ttys;users;times

services

is a logic list of PAM service names that the rule applies to.

ttys

is a logic list of terminal names that this rule applies to.

users

is a logic list of users to whom this rule applies.

times

the format here is a logic list of day/time-range entries the days are specified by a sequence of two character entries, MoTuSa for example is Monday Tuesday and Saturday. Note that repeated days are unset MoMo = no day, and MoWk = all weekdays bar Monday. The two character combinations accepted are

Mo Tu We Th Fr Sa Su Wk Wd Al

the last two being week-end days and all 7 days of the week respectively. As a final example, AlFr means all days except Friday.

pam_time modules checks the file /etc/security/time.conf for authentication. So, we should call the pam_time modules in /etc/pam.d/login.