LEED-AP-ID+C Exam Dumps - USGBC Leadership in Energy and Environmental Design (LEED) Questions and Answers

Best practices for ensuring that minimum program requirements (MPRs) for LEED certification are met involve confirming these requirements early in the project lifecycle. Specifically, this confirmation should occur during the discovery phase, which is the initial stage of a project. The discovery phase involves beginning initial research and analysis, and when sufficient information has been gathered, a goal-setting workshop is held to discuss findings. Part of these findings should include checking that the project complies with the MPRs for the applicable LEED rating system. Confirming MPRs during this early phase helps in setting a clear direction for the project and ensures that all subsequent work is aligned with LEED's fundamental requirements, facilitating a smoother certification process.

References:Excerpt from the document outlining the process and importance of checking minimum program requirements as part of the project's initial stages, specifically during the discovery phase .

The Commissioning (Cx) agent for Energy and Atmosphere Credit, Enhanced Commissioning, must be independent of the project’s design and construction management to avoid conflicts of interest. This ensures that the Cx agent can objectively assess the project’s performance and adherence to design intentions.

References: The LEED v4 reference guide for Interior Design and Construction specifies that the Cx agent should not be an employee of the design firm to maintain independence1. Additionally, the LEED AP with Specialty Candidate Handbook outlines the importance of the Cx agent’s independence in the commissioning process2.

The LEED v4 criteria for the Energy and Atmosphere Credit, Advanced Energy Metering, Option 2 requires advanced energy metering for all whole-building energy sources as well as for any individual energy end uses that account for 10% or more of the total annual consumption of the building. From the provided energy end-use consumption data, it is clear that space cooling, interior fans, and receptacles each represent more than 10% of the total energy consumption. Additionally, interior lighting and space heating together also account for a significant portion of the energy consumption. Hence, to meet the creditrequirements, advanced metering must be installed for all these categories, aligning with option C.

References:Guidance from the LEED study guide explaining the requirements for advanced energy metering under the Energy and Atmosphere Credit, particularly for end uses that comprise 10% or more of total consumption .

 To determine the feasibility of earning the Location and Transportation Credit for Reduced Parking Footprint, the project team needs to understand the local zoning code’s requirements for the minimum number of parking spaces. This is because the credit aims to minimize the impact on the environment by reducing parking capacity to meet but not exceed local zoning requirements1.

References:

• LEED v4 for Building Design and Construction Guide, which outlines the intent and requirements for the Reduced Parking Footprint credit2.
• The specific details of the Reduced Parking Footprint credit in the LEED credit library, which mention not exceeding the minimum local code requirements for parking capacity3.
• Discussions on LEEDuser forums about the Reduced Parking Footprint credit, which clarify the need to comply with local zoning requirements and not exceed them1.

The LEED Location & Transportation Credit, specifically the Surrounding Density and Diverse Uses, encourages projects to be situated in areas with a variety of services within walking distance. This credit is designed to promote walkability and reduce vehicle use, thereby lowering transportation emissions. Choosing a location within 1/2 mile of four different basic services supports these goals by providing employees with easy access to common destinations, which can be reached by walking rather than driving.

References: The LEED v4 for Interior Design and Construction reference guide details the requirements for the Surrounding Density and Diverse Uses credit, including the necessity for proximity to various services to encourage walkability1. Additionally, the LEEDuser website provides insights into achieving this credit by locating the project within a mixed-use area with accessible services2.

 The Construction and Demolition Waste Management Calculation requires information about the waste stream (the different types of materials being disposed of), the total amount of waste generated, the amount of waste diverted from landfill through recycling or reuse, and the amount of waste that is actually sent to the landfill.

References: This information aligns with the LEED AP Interior Design + Construction (LEED AP ID+C) V4 guidelines, which emphasize the importance of waste management planning in sustainable building practices1.

To earn the Innovation Credit, LEED Accredited Professional for an Interior Design and Construction project, a LEED AP with ID+C specialty must submit their credentials as a principal participant of the project team. This is because the ID+C specialty credential signifies technical knowledge specific to the design and construction of environmentally conscious commercial interiors, which is essential for the project’s certification process1.

References:

• LEED v4.1 ID+C updated guidance on the LEED Accredited Professional Innovation point, which allows for the LEED AP ID+C credential to count towards this point1.
• The LEED credit library and the LEED v4: Interior Design + Construction Guide, which provide detailed information on the requirements for earning Innovation credits23.

For the Water Efficiency Prerequisite, Indoor Water Use Reduction, cooling towers and evaporative condensers must have makeup water meters to measure the amount of water used, conductivity controllers to optimize water quality and minimize consumption, and overflow alarms to prevent excess water use.

References: The LEED v4 Indoor Water Use Reduction Calculator is a tool that includes assumptions for baseline water use and helps in documenting water use reduction strategies, which would involve the use of makeup water meters and conductivity controllers1. Additionally, the LEED v4 reference guide for water efficiency credits outlines the need for water use reduction and the strategies to achieve it, which align with the requirements of makeup water meters and conductivity controllers2.

To meet the requirements for Indoor Environmental Quality Credit, Interior Lighting, Option 1, the design team should specify lighting controls that enable adjustments to suit individual tasks and preferences. This includes providing controls that allow for on, off, and at least one intermediate light level, such as 50%. Overhead lighting with these controls for the open-office space would meet this criterion.

References: The LEED reference guide for Interior Design and Construction provides detailed information on the requirements for lighting controls under the Indoor Environmental Quality Credit, Interior Lighting, Option 1. Specifically, it states that for at least 90% of individual occupant spaces, there must be individual lighting controls that enable occupants to adjust the lighting to suit their tasks and preferences, with at least three lighting levels or scenes (on, off, midlevel) 1.

In the context of LEED AP Interior Design + Construction, public restrooms are considered nonregularly occupied spaces. This classification is based on the nature of the space usage, which does not require continuous thermal comfort controls due to the intermittent and brief occupancy. Therefore, thermostats in such spaces can be eliminated during value engineering to optimize resource allocation without compromising the comfort of regular occupants.

References:

• LEED v4: Interior Design + Construction Guide1.
• LEED BD+C: Indoor Environmental Quality Credit, Thermal Comfort2.
• Pilot-Credits EQpc114: Learning controls for thermal comfort3.