HPE3-U01 Exam Dumps - HP Aruba ACNT Questions and Answers

According to the Aruba Network Technician (ACNT) documents and learning resources, the valid configurable “Client VLAN Assignment” options for a Bridge-based WLAN in Aruba Central are native VLAN, automatic VLAN, and static VLAN. These options allow you to specify how the VLAN ID for the WLAN clients is determined.

• Native VLAN: This option allows you to use the native VLAN of the AP’s Ethernet port as the VLAN ID for the WLAN clients. The native VLAN is the default VLAN that carries untagged traffic on a trunk port. This option is useful when you want to simplify the VLAN configuration and use the same VLAN for all the WLAN clients connected to the same AP.
• Automatic VLAN: This option allows you to use the VLAN ID assigned by a DHCP server to the WLAN clients. The DHCP server can use attributes such as MAC address, hostname, or vendor class to assign different VLAN IDs to different WLAN clients. This option is useful when you want to dynamically assign VLANs based on the client characteristics or policies.
• Static VLAN: This option allows you to specify a single VLAN ID for all the WLAN clients. You can either enter a VLAN ID manually or select a named VLAN from the drop-down list. A named VLAN is a VLAN that has a user-defined name associated with it for easy identification. This option is useful when you want to assign a fixed VLAN to a WLAN SSID.

References:

The management plane is the logical path of all traffic related to the management of the device. Examples of protocols processed in the management plane are Simple Network Management Protocol (SNMP), Telnet, HTTP, Secure HTTP (HTTPS), and SSH. These management protocols are used for monitoring and for command-line interface (CLI) access12. Therefore, HTTPS and SSH are protocols that operate on the management plane, while the other options are not. TCP is a transport layer protocol that provides reliable data delivery for various applications, but it is not specific to the management plane3. ARP is a network layer protocol that resolves IP addresses to MAC addresses, but it is not used for device management4. STP is a data link layer protocol that prevents loops in switched networks, but it is not related to the management plane5. References: 1: Management Plane Protection - Cisco 2: Planes of Operation > IP Routing on Cisco IOS, IOS XE, and IOS XR: How … 3: [Transmission Control Protocol - Wikipedia] 4: [Address Resolution Protocol - Wikipedia] 5: [Spanning Tree Protocol - Wikipedia] : https://en.wikipedia.org/wiki/Transmission_Control_Protocol : https://en.wikipedia.org/wiki/Address_Resolution_Protocol : https://en.wikipedia.org/wiki/Spanning_Tree_Protocol

 A collision occurs when two or more devices try to transmit data at the same time on a shared medium, such as a cable or a wireless channel. Collisions result in corrupted or lost data, and reduce the efficiency of the network. Different connection types have different susceptibility to collisions, depending on how they handle data transmission and collision detection.

Dark fiber and fiber are optical connections that use light to transmit data. They are immune to electromagnetic interference and have very high bandwidth. They also use full-duplex communication, which means that data can be sent and received simultaneously on separate fibers. Therefore, collisions are very unlikely to happen on dark fiber and fiber connections.

Copper is an electrical connection that uses metal wires to transmit data. It is prone to electromagnetic interference and has lower bandwidth than optical connections. It can use either half-duplex or full-duplex communication, depending on the device and the protocol. Half-duplex communication means that data can only be sent or received at a time on the same wire. Therefore, collisions are more likely to happen on copper connections that use half-duplex communication, such as Ethernet hubs.

Wi-Fi is a wireless connection that uses radio waves to transmit data. It is also prone to electromagnetic interference and has lower bandwidth than optical connections. It uses half-duplex communication, which means that data can only be sent or received at a time on the same channel. Therefore, collisions are very likely to happen on Wi-Fi connections, especially when there are many devices using the same channel or frequency.

References:

• Types of Collisions
• What are elastic and inelastic collisions?
• Why is a switch port a collision domain?

 Aruba Central is a cloud-based networking solution that offers simplicity, security, and scalability for managing Aruba network infrastructure. It uses HTTPs to communicate with networking equipment such as wireless, wired, VPN, and SD-WAN devices. It also provides AI-powered insights, workflow automation, and advanced security features to unifyoperations across campus, branch, data center, and remote work environments. Aruba Central does not require an on-premises server, nor does it use SNMP for management. It also does not support third-party networking equipment, as it is designed for Aruba ESP (Edge Services Platform). References: Aruba Central for Cloud-managed networking, About Aruba Central, Aruba Central data sheet

 The dual-band IEEE WLAN standard that provides up to 4.8 Gbps of theoretical data rate is 802.11 be, also known as Wi-Fi 7. This standard is an amendment to the IEEE 802.11-2020 standard that aims to improve the performance, efficiency, and reliability of WLANs operating in the 2.4 GHz and 5 GHz frequency bands. Some of the key features of 802.11 be include:

• Enhanced multi-user multiple-input multiple-output (MU-MIMO) that supports up to 16 spatial streams and 37 users per channel
• Orthogonal frequency division multiple access (OFDMA) that allows multiple users to share the same channel with different subcarrier allocations
• 320 MHz channel bandwidth that enables higher data rates and spectral efficiency
• 4096 quadrature amplitude modulation (QAM) that increases the number of bits per symbol
• Multi-link operation that allows a device to connect to multiple access points (APs) simultaneously
• Enhanced power saving mechanisms that reduce the energy consumption and extend the battery life of devices

The other options are incorrect because they do not provide the same level of data rate as 802.11 be. 802.11 ac, or Wi-Fi 5, supports up to 1.73 Gbps of data rate in the 5 GHz band with 160 MHz channel bandwidth and 256 QAM. 802.11 ax, or Wi-Fi 6, supports up to 9.6 Gbps of data rate in both 2.4 GHz and 5 GHz bands with 160 MHz channel bandwidth, 1024 QAM, and OFDMA, but it is not a dual-band standard as it also supports the 6 GHz band. 802.11 n, or Wi-Fi 4, supports up to 600 Mbps of data rate in both 2.4 GHz and 5 GHz bands with 40 MHz channel bandwidth and 64 QAM. 802.1 lax and 802.1 In are not valid IEEE WLAN standards. References: IEEE 802.11be Extremely High Throughput: The Next Generation of Wi-Fi Technology Beyond 802.11ax, Wi-Fi Timeline, IEEE 802.11-2020

Local-based management refers to managing a network device directly from the device itself, using tools such as console port, web interface, or command-line interface. Server-based management refers to managing a network device remotely from a centralized server, using tools such as Windows Admin Center, System Center, or Azure Arc123. The differences between these two types of management are:

• Local-based management can use the device’s console port, which is a physical connection that allows access to the device even when the network is down or the device is not configured. Server-based management cannot use the console port, as it relies on network connectivity and protocols4.
• Server-based management can monitor multiple devices at once, using a single dashboard or interface that shows the status, performance, and configuration of all the devices in the network. Local-based management can only monitor one device at a time, using the device’s own tools123.

References:

1: Cloud vs Server: Learn the Key Differences and Benefits - Parallels 2: Windows Server management overview | Microsoft Learn 4: 5 Benefits of Server-Based Local Access Networks for Small … - Versatech 3: What is Windows Admin Center | Microsoft Learn

 The TCP three-way handshake is a process that is used in a TCP/IP network to create a connection between a client and a server. It involves the exchange of three packets: SYN, SYN-ACK, and ACK. The goal of the TCP three-way handshake is to establish a reliable, flow-controlled connection between the two endpoints. This means that the connection is able to ensure that the data is transmitted without errors, losses, or duplications, and that the data is sent at a rate that both sides can handle.

The TCP three-way handshake works as follows:

• The client initiates the connection by sending a SYN packet to the server. The SYN packet contains a random sequence number that indicates the starting point of the data that the client will send.
• The server responds to the client by sending a SYN-ACK packet. The SYN-ACK packet contains the server’s own sequence number and an acknowledgment number that is equal to the client’s sequence number plus one. This indicates that the server has received the client’s SYN packet and is ready to receive data from the client.
• The client completes the handshake by sending an ACK packet to the server. The ACK packet contains an acknowledgment number that is equal to the server’s sequence number plus one. This indicates that the client has received the server’s SYN-ACK packet and is ready to send data to the server.

After the TCP three-way handshake is completed, the connection is established and the data transfer can begin.

References: The answer can be verified by using the following resources:

• TCP 3-Way Handshake Process - GeeksforGeeks
• TCP 3-Way Handshake (SYN, SYN-ACK,ACK) - Guru99
• Akamai Blog | What is a TCP Three-Way Handshake?
• What is a Three-Way Handshake? - Definition from Techopedia
• What is TCP 3-Way Handshake, Benefits, and Drawbacks? - Networking Signal

To configure interfaces 1/1/1 and 1/1/2 as VLAN 10 access ports in ArubaOS-CX switches, the following commands are required:

switch(config)# vlan 10

switch(config-vlan-10)# name VLAN10

switch(config-vlan-10)# exit

switch(config)# interface 1/1/1

switch(config-if)# no shutdown

switch(config-if)# vlan access 10

switch(config-if)# exit

switch(config)# interface 1/1/2

switch(config-if)# no shutdown

switch(config-if)# vlan access 10

switch(config-if)# exit

Option B shows the correct syntax and sequence of commands to create VLAN 10, assign a name to it, and configure the interfaces as access ports in that VLAN. Option A is incorrect because it uses the wrong keyword vlan-id instead of vlan access. Option C is incorrect because it does not create VLAN 10 before assigning the interfaces to it. Option D is incorrect because it uses the wrong keyword vlan mode instead of vlan access. References: ArubaOS-CX 10.05 Fundamentals Guide 6200 Switch Series, Configuring VLANs on AOS-CX - Aruba