H13-611_V4.5 Exam Dumps - Huawei HCIA Storage Questions and Answers

In order to add additional controllers to an existing HUAWEI OceanStor system, a FC (Fibre Channel) or iSCSI (Internet Small Computer System Interface) Host Bus Adapter (HBA) is required. The HBA connects the controller to the storage devices, and it is required to add additional controllers to the system. The HBA provides the interface between the controller and the storage devices, and it allows the controller to communicate with the storage devices over the FC or iSCSI protocol. Other options such as SAS cabling, 56 Gb Infiniband module, and Smart I/O card are also important components in storage systems, but they are not directly related to adding additional controllers to an existing HUAWEI OceanStor system.

The main functions of the business continuity solution are to minimize the impact on the business service, ensure zero data loss and zero service interruption, and improve the utilization rate of the disaster recovery equipment. Predicting the disaster occurrence accurately is not a function of the business continuity solution.

If a disk is faulty, the process of recovering data on the faulty disk is typically done through a process called reconstruction. Reconstruction involves copying data from a healthy disk in a RAID array to the faulty disk. This can be done through software or hardware RAID controllers. The RAID controller will use the data stored on the other disks in the RAID set to recreate the data that was stored on the faulty disk. This process can be done while the RAID array is online, allowing the RAID to continue functioning while the reconstruction process is taking place. Once the reconstruction is complete, the faulty disk can be replaced and the RAID array can continue to function normally.

Resolution: The hard disk types supported by OceanStor 2200 V3 are: SAS, NL-SAS and SSD, and SATA is not supported. OceanStor

V3 series product support

Storage virtualization does not enable servers to directly access storage hardware. Instead, it creates a virtual layer between the physical storage devices and the servers, allowing the servers to access the storage devices through a single interface. This virtual layer also allows the storage devices to be centrally managed, and can be used to reduce the limitations of physical storage capacity and hide the complexity of physical devices.