PCNSE Exam Results

To determine the egress interface a Palo Alto Networks firewall will use to route a specific IP address, the appropriate command is test routing fib-lookup ip 10.2.5.3 virtual-router default. This command performs a Forwarding Information Base (FIB) lookup for the specified IP address within the context of the specified virtual router, which in this case is the default virtual router. The FIB lookup process checks the routing table and the associated forwarding information to determine the next-hop and the egress interface for the given IP address. This command is instrumental for troubleshooting and verifying routing decisions made by the firewall to ensure that traffic is routed as expected through the network infrastructure.

To enable the firewall team to view and select from a list of usernames and user groups directly within Panorama policies for new security rule creation, User-ID group mapping should be configured in Panorama under User Identification. This feature allows Panorama to collect user and group information from various sources (like Active Directory) and use this information to create policies. By setting up User-ID group mapping, administrators can leverage user identity as criteria in security rules, enabling more granular access control and policy enforcement based on user or group membership, thereby enhancing the overall security posture.

• A and D are the best practice deployment modes for the firewall if the company wants to add threat prevention to the network without redesigning the network routing. This is because these modes allow the firewall to act as a transparent device that does not affect the existing network topology or routing1.
• A: VirtualWire mode allows the firewall to be inserted into any existing network segment without changing the IP addressing or routing of that segment2. The firewall inspects traffic between two interfaces that are configured as a pair, called a virtual wire. The firewall applies security policies to the traffic and forwards it to the same interface from which it was received2.
• D: Layer 2 mode allows the firewall to act as a switch that forwards traffic based on MAC addresses3. The firewall inspects traffic between interfaces that are configured as Layer 2 interfaces and belong to the same VLAN. The firewall applies security policies to the traffic and forwards it to the appropriate interface based on the MAC address table3.

Verified References:

• 1: https://www.garlandtechnology.com/blog/whats-your-palo-alto-ngfw-deployment-plan
• 2: https://docs.paloaltonetworks.com/pan-os/10-1/pan-os-admin/networking/configure-interfaces/virtual-wire.html
• 3: https://docs.paloaltonetworks.com/pan-os/10-1/pan-os-admin/networking/configure-interfaces/layer-2.html

Virtual Desktop Infrastructure (VDI) and Virtual Machine (VM) environments, such as Citrix XenApp and XenDesktop or VMWare Horizon and Vcenter, support access natively through HTML5. You can RDP, VNC, or SSH to these machines through Clientless VPN without requiring additional third-party middleware. In environments that do not include native support for HTML5 or other web application technologies supported by Clientless VPN, you can use third-party vendors, such as Thinfinity, to RDP through Clientless VPN. Reference: https://docs.paloaltonetworks.com/globalprotect/10-1/globalprotect-admin/globalprotect-clientless-vpn/supported-technologies

https://networkwiki.blogspot.com/2017/03/palo-alto-networks-clientless-vpn-and.html