Newly Released NFPA CFPS Exam PDF

According to the web search results, the goals of the first edition of NFPA 13D were to provide sufficient time for safe egress or rescue, economic viability, and limit damage to the dwelling. The first edition of NFPA 13D was published in 1975 and was based on the concept of a “life safety” sprinkler system that was intended to protect the occupants of one- and two-family dwellings and manufactured homes from fire.The first edition of NFPA 13D stated that the system was not designed to protect the property or contents from fire damage, but rather to provide a tenable environment for escape or rescue1.The first edition of NFPA 13D also recognized the need for economic viability of the system, and therefore allowed for reduced water supply and piping requirements compared to other sprinkler standards2.The first edition of NFPA 13D did not explicitly state the goal of limiting damage to the dwelling, but it implied that the system would have some beneficial effect on the fire spread and severity by stating that the system was designed to prevent flashover in the room of fire origin1.References:

• NFPA 13D: Standard for the Installation of Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes, 1975 Edition, Section 1-11
• Fire Protection Handbook, 20th Edition, Volume 1, Chapter 8, Section 8.2.1.22

The measurement of a fluid’s resistance to flow is calledviscosity.Viscosity is the property of a fluid that describes how easily it can deform or move when subjected to a shear stress, such as the force exerted by a pipe wall or a pump1. A fluid with high viscosity, such as honey, resists flow and requires more pressure to overcome the friction between its layers.A fluid with low viscosity, such as water, flows easily and has less frictional resistance2.Viscosity affects the hydraulic properties of water for fire protection systems, such as the flow rate, pressure loss, and pump power3. Viscosity is usually expressed in units of pascal-second (Pa s) or centipoise (cP) for liquids, and is dependent on the temperature and composition of the fluid.References:

• Viscosity | Definition, Facts, Formula, Units, & Examples
• Viscosity – The Physics Hypertextbook
• Fire Pump Types | NFPA
• [12.4: Viscosity and Laminar Flow; Poiseuille’s Law]

ANSI S1.4a

Sound meters used to test notification appliances in fire alarm systems shall comply with the standard ANSI S1.4a, Specifications for Sound Level Meters, Type 2 requirements, according to NFPA 72 2010, the National Fire Alarm and Signaling Code.This standard specifies the performance and accuracy criteria for sound level meters that are used to measure the sound pressure levels of audible signals in fire alarm systems1