Newly Released APICS CPIM-Part-2 Exam PDF

A3 method is a tool that can be used in a root cause corrective action process to determine the problem of a machine that is suddenly having excessive downtime. A3 method is a structured problem-solving approach that follows the Plan-Do-Check-Act (PDCA) cycle and uses a single sheet of paper (A3 size) to document the problem, analysis, countermeasures, and results1. A3 method can help identify the root cause of a problem by using tools such as the 5 Whys or the fishbone diagram, and then develop and implement effective corrective actions to prevent recurrence2. A3 method can also help communicate the problem and the solution to stakeholders, as well as monitor and evaluate the outcomes3.

The steps of the A3 method are4:

• Step 1: Define the problem and its impact. Describe the current situation, the gap between the actual and the desired state, and the scope and magnitude of the problem.
• Step 2: Identify the root cause of the problem. Use tools such as the 5 Whys or the fishbone diagram to analyze the factors that contribute to the problem and drill down to its root cause.
• Step 3: Propose countermeasures to address the root cause. Generate possible solutions that can eliminate or reduce the root cause, and evaluate their feasibility, effectiveness, and costs.
• Step 4: Implement countermeasures. Select the best solution and plan how to execute it. Define the roles, responsibilities, resources, timeline, and expected outcomes of the implementation.
• Step 5: Check results and process. Measure and compare the results before and after the implementation, and verify if the problem has been solved or improved. Also check if the process has been followed correctly and document any deviations or issues.
• Step 6: Standardize successful processes or identify unresolved issues. If the results are satisfactory, standardize the new process and ensure that it is sustained. If not, identify the remaining or new issues and repeat the A3 method.

Therefore, A3 method is a tool that can be used in a root cause corrective action process to determine the problem of a machine that is suddenly having excessive downtime.

References: 1: What is an A31 2: How to Use an A3 Report for Problem Solving 2 3: The A3 Problem Solving Method 4 4: The A3 Report – A Simple Tool for Complex Problems 5

Measurements are quantitative or qualitative data that indicate the magnitude, frequency, or impact of the problem. Measurements help to define the problem clearly, objectively, and specifically, as well as to establish a baseline for improvement. Therefore, what should be added to the problem statement to make it more useful is measurements that help describe the problem. For example, a more useful problem statement could be “We have observed that the inventory system causes 15% of plastic parts to be damaged or misplaced every month, resulting in $10,000 of additional costs and 5% of customer complaints.”

 The capacity requirements plan is used primarily to balance capacity and load at work centers. A work center is a location where one or more resources perform a specific operation or a group of operations. Capacity is the amount of time or output that a work center can offer for production activities. Load is the amount of time or output that a work center is required to produce based on the planned production schedule. Balancing capacity and load means matching the available capacity with the required load, so that there is no excess or shortage of capacity at any work center.

The capacity requirements plan is a report that shows the projected load and capacity of each work center over a planning horizon. It is derived from the master production schedule (MPS), which specifies the quantity and timing of finished goods to be produced, and the bill of materials (BOM), which specifies the components and materials needed for each finished good. The capacity requirements plan also uses the routing file, which specifies the sequence of operations and work centers required for each finished good, and the work center file, which specifies the capacity and availability of each work center. The capacity requirements plan can help to identify any gaps or surpluses in capacity at each work center and to take corrective actions, such as revising the MPS, rescheduling operations, adding or reducing resources, or outsourcing production.

The other options are not the primary uses of the capacity requirements plan. Calculating the level of available capacity is an input to the capacity requirements plan, not an output. The level of available capacity is determined by the work center file, which contains information such as shifts, hours, efficiency, utilization, and maintenance of each work center. Determining the overall product load profile is not a use of the capacity requirements plan, as it does not consider the product mix or demand variability. The overall product load profile is a general estimate of the total production volume or demand over a period of time. Determining the priority of orders is not a use of thecapacity requirements plan, as it does not consider the due dates or urgency of orders. The priority of orders is determined by using priority rules or dispatching methods, such as first-come-first-served (FCFS), shortest processing time (SPT), earliest due date (EDD), or critical ratio (CR).

References := Capacity Requirements Planning (CRP): Definition and Procedures, Capacity Requirements Planning (CRP Plan and Strategies) - ERP Information, Definition of Capacity Requirements Planning (CRP) - Gartner …

 Rivalry among competing sellers is the degree of competition between firms in the same industry. It can affect the profitability and market share of the firms, and influence their strategies and decisions. Rivalry tends to be stronger when the demand is slow, the products are similar, the switching costs are low, and the capacity is high. Rivalry can also lead to innovation, differentiation, and customer satisfaction.

Rivalry among competing sellers is generally weaker when buyer demand is growing rapidly. This is because a fast-growing market offers more opportunities for expansion and growth for all the firms, without having to compete aggressively for a limited number of customers. A fast-growing market also reduces the pressure to cut prices or increase advertising, as the demand exceeds the supply. A fast-growing market can also attract new entrants, which can increase the rivalry in the long run, but in the short run, it can create more diversity and segmentation in the market.

References: Competitive Rivalry: What Is It and Why Is It Important? | Indeed.com; Industry Rivalry & Competition | Porter’s Five Forces.