Fortinet Fortinet Network Security Expert FCP_FGT_AD-7.4 New Questions

Both interfaces must have directly connected routes on the routing table

In NAT mode, each interface must have a corresponding entry in the routing table, typically as a directly connected route, to route traffic between them effectively.

Both interfaces must have IP addresses assigned

In NAT mode, each interface must have an IP address to participate in routing and NAT operations. The IP addresses allow the FortiGate to forward traffic between different network segments.

By default, DNS queries to FortiGuard servers use UDP port 53.

With the override setting enabled and a higher priority configured on FGT-2, it will preempt FGT-1 and become the primary unit in the HA cluster.

A session for denied traffic is created.

The command set ses-denied-traffic enable ensures that sessions for denied traffic are logged, meaning a session will be created for traffic that is denied by security policies.

The number of logs generated by denied traffic is reduced.

The set block-session-timer 30 command sets a timer to prevent excessive logging of denied traffic within a short period, which helps reduce the number of logs generated by repeated denied traffic sessions. This timer blocks sessions for a specified period (30 seconds in this case) to avoid overwhelming the log system with repetitive entries.