All N10-009 Test Inside CompTIA Questions

When a network interface's indicator lights are not blinking on either the computer or the switch, it suggests a physical layer issue. Here is the detailed reasoning:

Ethernet Properly Connected: The Ethernet cable is correctly connected, eliminating issues related to a loose or faulty cable.

No Indicator Lights: The absence of blinking indicator lights on both the computer and the switch typically points to the port being administratively shut down.

Switch Port Shut Down: In networking, a switch port can be administratively shut down, disabling it from passing any traffic. This state is configured by network administrators and can be verified and changed using the command-line interface (CLI) of the switch.

Command to Check and Enable Port:

bash

Copy code

Switch> enable

Switch# configure terminal

Switch(config)# interface [interface id]

Switch(config-if)# no shutdown

The command no shutdown re-enables the interface if it was previously disabled. This will restore the link and the indicator lights should start blinking, showing activity.

Using a /30 subnet mask is the most efficient way to conserve IP space for a point-to-point connection between two routers. A /30 subnet provides four IP addresses, two of which can be assigned to the router interfaces, one for the network address, and one for the broadcast address. This makes it ideal for point-to-point links where only two usable IP addresses are needed.References: CompTIA Network+ study materials and subnetting principles.

Explanation: Availability refers to ensuring that data is accessible when needed. If a customer's data is accidentally deleted, it impacts availability, as the data can no longer be accessed.

=================

When a network administrator installs a new Network Interface Card (NIC) and users are unable to reach the server, one of the common issues is the use of an incorrect cable type. Network cables must match the specifications required by the NIC and the network infrastructure (e.g., Cat5e, Cat6 for Ethernet).

NIC Compatibility: The new NIC might require a specific type of cable to function properly. Using a cable not rated for the NIC's required speeds or capabilities can result in connectivity issues.

Cable Standards: Different NICs and network devices might need different cabling standards (straight-through vs. crossover cables, or specific fiber optic types).

Connection Types: Ensuring that the cable connectors are appropriate for the NIC ports (e.g., RJ45 for Ethernet, LC connectors for fiber optics).

Network References:

CompTIA Network+ N10-007 Official Certification Guide: Discusses network cabling standards and NIC specifications.

Cisco Networking Academy: Provides insights into cabling and NIC configurations for optimal network performance.

Network+ Certification All-in-One Exam Guide: Offers comprehensive details on troubleshooting network connectivity issues, including cabling problems.