New Year Special 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: Board70

300-425 Questions Bank

Page: 12 / 14
Question 48

An engineer must design and configure a wireless network for:

• pervasive coverage in an oil terminal

• casual web and email traffic

• 5 GHz

What is the best design?

Options:

A.

Keep the power assignment as auto and disable 802.11n and 802.11ac MCS rate.

B.

Disable all data rates below 24 Mbps and keep the power assignment on the AP as auto.

C.

Keep all the data rates enabled and set the AP power assignment mode to auto.

D.

Disable all data rates below 54 Mbps and assign static power level 1 on all access points.

Question 49

A network consultant must create a wireless design with these characteristics:

• Provide coverage in a single contiguous space.

• Support dual-band wireless coverage.

• Use nine APs for full coverage in a 5 GHz band.

What must the engineer do to mitigate co-channel interference and maintain coverage in 2.4 GHz?

Options:

A.

Adjust the TPC neighbor threshold value to -64 dBm on the 2.4 GHz band.

B.

Configure static channel and power settings of the 2.4 GHz radios.

C.

Disable 2.4 GHz radios on selective APs.

D.

Deactivate low data rates on the 2.4 GHz band.

Question 50

A wireless consultant reviewing the installation of an old wireless network. The existing AireOS controllers are running software version 6.0.4539:44024. The customer is using OEAP and wants to keep this functionality. Which licenses should the consultant propose with the latest controller software version?

Options:

A.

Base

B.

Premium

C.

WPlus

D.

Advanced

Question 51

A customer has this wireless design:

• two Cisco Catalyst 9800 Series wireless controllers that are configured in a high-availability SSO cluster to manage the APs in a local office network

• 100 APs in local mode that are registered to the high-availability cluster

• one Catalyst 9800 Series wireless controller that is deployed as an anchor in a DMZ

• a CAPWAP tunnel in UP state between the high-availability cluster and the anchor WLC

The customer wants the anchored traffic to remain up if a single WLC in the high-availability cluster fails. How must this requirement be incorporated into the design?

Options:

A.

Configure the APs with the high-availability cluster as the primary base.

B.

Deploy EMC APs as anchors and configure a high-availability cluster.

C.

Create a separate EoIP tunnel for each WLC in the high-availability cluster.

D.

Configure the mobility MAC address for the high-availability cluster.

Page: 12 / 14
Exam Code: 300-425
Exam Name: Designing Cisco Enterprise Wireless Networks (ENWLSD)
Last Update: Dec 23, 2024
Questions: 196
300-425 pdf

300-425 PDF

$28.5  $94.99
300-425 Engine

300-425 Testing Engine

$33  $109.99
300-425 PDF + Engine

300-425 PDF + Testing Engine

$43.5  $144.99