CS0-002 Exam Dumps - CompTIA CySA+ Questions and Answers

Reporting processes are important to include when updating an incident response plan after a breach for several reasons. Two of the most likely reasons are:

• To meet regulatory requirements for timely reporting. Many regulations and standards require organizations to report security incidents or breaches within a certain time frame or face penalties or sanctions. For example, the General Data Protection Regulation (GDPR) requires organizations to report personal data breaches within 72 hours of becoming aware of them. Reporting processes can help organizations to comply with these requirements by defining who, what, when, where, how, and why to report incidents or breaches.
• To limit reputation damage caused by the breach. Security incidents or breaches can have negative impacts on an organization’s reputation, trust, and customer loyalty. Reporting processes can help organizations to limit these impacts by communicating effectively and transparently with internal and external stakeholders, such as employees, customers, partners, regulators, media, and public. Reporting processes can help organizations to provide accurate and consistent information about the breach, its causes, impacts, and remediation actions.

Other possible reasons to include reporting processes when updating an incident response plan after a breach are:

• To establish a clear chain of command (A). Reporting processes can help organizations to establish a clear chain of command for incident response by defining roles and responsibilities, escalation procedures, and decision-making authority.
• To remediate vulnerabilities that led to the breach (D). Reporting processes can help organizations to remediate vulnerabilities that led to the breach by documenting and analyzing the root causes, lessons learned, and best practices for improvement.
• To isolate potential insider threats (E). Reporting processes can help organizations to isolate potential insider threats by monitoring and auditing user activities, behaviors, and access rights before, during, and after the breach.

References: : https://gdpr.eu/data-breach-notification/ : https://www.techopedia.com/definition/13493/penetration-testing : https://www.techopedia.com/definition/25888/security-development-lifecycle-sdl

CAN bus (Controller Area Network) is a vehicle bus standard designed to allow microcontrollers and devices to communicate with each other’s applications without a host computer1. CAN bus is a message-based protocol, designed originally for multiplex electrical wiring within automobiles to save on copper, but it can also be used in many other contexts. CAN bus enables each device to send and receive data on a shared network, reducing the need for complex wiring and increasing reliability and performance. CAN bus is one of the five protocols used in the on-board diagnostics (OBD)-II vehicle diagnostics standard. A vulnerability within the new fleet of vehicles that the company recently purchased is most likely targeting CAN bus, as it is a common and critical communication system in modern vehicles. An attacker could exploit a vulnerability in CAN bus to compromise or manipulate various vehicle functions or systems, such as braking, steering, engine control, airbags, etc. SCADA (A) stands for Supervisory Control And Data Acquisition, which is a system that monitors and controls industrial processes or infrastructure2. SCADA is not a vehicle bus standard and is not likely to be targeted by a vulnerability within a fleet of vehicles. Modbus © is a serial communications protocol that connects industrial electronic devices3. Modbus is not a vehicle bus standard and is not likely to be targeted by a vulnerability within a fleet of vehicles. IoT (D) stands for Internet of Things, which is a network of physical objects that are embedded with sensors, software, and other technologies to connect and exchange data with other devices and systems over the internet. IoT is not a vehicle bus standard and is not likely to be targeted by a vulnerability within a fleet of vehicles.

References: 1: https://www.techopedia.com/definition/24771/technical-controls  2: https://www.techopedia.com/definition/25888/security-development-lifecycle-sdl  3: https://www.techopedia.com/definition/31686/resource-exhaustion : https://www.techopedia.com/definition/13493/penetration-testing

A breach notification is a communication to affected individuals or entities that informs them of a security incident involving their personal or sensitive information. A breach notification may include details such as what information was compromised, when and how the incident occurred, what actions are being taken to mitigate the impact, and what steps the recipients should take to protect themselves3 A breach notification may be required by law or regulation, depending on the type and location of the information involved and the jurisdiction of the affected parties. Different countries or regions may have different breach notification requirements, such as who must be notified, when, how, and what information must be disclosed4 Therefore, the best role to determine the breach notification requirements for a company that experienced a breach of sensitive information affecting customers across multiple geographical regions is legal counsel. Legal counsel can advise the company on its legal obligations and liabilities, as well as help draft and deliver appropriate breach notifications.

Fuzzing is a technique that involves sending random, malformed, or unexpected inputs to an application to trigger errors, crashes, or vulnerabilities. Fuzzing can be used to test the robustness and security of software, especially when the source code is not available or the input format is complex1. Fuzzing can also simulate abnormal user behavior, such as entering invalid data, clicking on random buttons, or sending malicious requests2.

Fuzzing tools are software programs that automate the process of generating and sending inputs to the application under test. There are different types of fuzzing tools, such as black-box fuzzers, white-box fuzzers, and grey-box fuzzers, depending on the level of information and feedback they have about the application1. Some examples of fuzzing tools are AFL, Peach, and [Sulley].

Polymorphic methods are techniques that allow fuzzing tools to modify or mutate the inputs in different ways, such as changing the length, value, type, or structure of the data. Polymorphic methods can increase the diversity and effectiveness of the inputs and help discover more bugs or vulnerabilities in the application .

Therefore, using fuzzing tools with polymorphic methods would be the best approach to test a new application that simulates abnormal user behavior to find software bugs. This approach would generate a large number of inputs that cover various scenarios and edge cases and expose any flaws or weaknesses in the application’s functionality or security.

APTs utilize methods and technologies differently than other threats. APTs stand for Advanced Persistent Threats, and they are sophisticated and stealthy attacks that target specific organizations or networks over a long period of time, often with political or financial motives. APTs utilize methods and technologies differently than other threats, such as using custom-made malware, exploiting zero-day vulnerabilities, leveraging social engineering techniques, or employing multiple vectors of attack. APTs can also evade detection by existing security tools or controls, by using encryption, obfuscation, proxy servers, or other techniques to hide their activities or communications.

The best recommendation based on the Prowler report is to delete Cloud Dev access key 1. This is because the report shows that this access key has not been used for more than 90 days, which violates the AWS security best practice of rotating access keys every 90 days or less. Deleting unused or inactive access keys can reduce the risk of unauthorized access or compromise of AWS resources.

The CySA+ exam outline calls out “trusted firmware updates,” but trusted firmware itself is more commonly described as part of trusted execution environments (TEEs). Trusted firmware is signed by a chip vendor or other trusted party, and then used to access keys to help control access to hardware. TEEs like those used by ARM processors leverage these technologies to protect the hardware by preventing unsigned code from using privileged features."

Trusted firmware updates provide organizations with secure code signing, distribution, installation, and attestation for embedded devices. Embedded devices are devices that have a dedicated function and are part of a larger system or network, such as routers, cameras, sensors, etc. Embedded devices often run on firmware, which is a type of software that controls the device’s hardware and functionality. Firmware updates are essential for improving the performance, security, and reliability of embedded devices. However, firmware updates also pose risks of introducing vulnerabilities or malware into the devices if they are not properly secured. Trusted firmware updates are firmware updates that use cryptographic techniques to ensure the integrity, authenticity, and confidentiality of the firmware code and data. Trusted firmware updates typically involve four steps1:

• Code signing: The firmware code is digitally signed by the firmware developer or provider using a private key. The digital signature proves that the firmware code is from a trusted source and has not been tampered with.
• Distribution: The signed firmware code is securely transmitted to the embedded device or a trusted intermediary (such as a cloud service or a gateway) using encryption or other methods. The transmission ensures that the firmware code is not intercepted or modified by unauthorized parties.
• Installation: The embedded device verifies the digital signature of the firmware code using a public key that is stored in a secure location (such as a trusted platform module or TPM). The verification ensures that the firmware code is from a trusted source and has not been tampered with. The embedded device then installs the firmware code and reboots to apply the update.
• Attestation: The embedded device reports its firmware status and configuration to a trusted verifier (such as a cloud service or a gateway) using a cryptographic proof. The proof ensures that the embedded device has installed the correct firmware update and has not been compromised.

Trusted firmware updates provide organizations with several benefits for hardware assurance, such as2:

• Preventing unauthorized or malicious firmware updates that could compromise the security or functionality of embedded devices
• Detecting and mitigating firmware attacks or incidents that could affect the availability or performance of embedded devices
• Complying with regulatory or industry standards or best practices for firmware security
• Enhancing customer trust and satisfaction with embedded devices

Trusted firmware updates do not provide organizations with development, compilation, remote access, or customization for embedded devices (A), as these are software engineering tasks that are not directly related to firmware security. Trusted firmware updates do not provide organizations with security specifications, open-source libraries, or custom tools for embedded devices (B), as these are software resources that are not directly related to firmware security. Trusted firmware updates do not provide organizations with remote code execution, distribution, maintenance, or extended warranties for embedded devices ©, as these are software features or services that are not directly related to firmware security.

References: 1: https://www.techopedia.com/definition/24771/technical-controls  2: https://www.techopedia.com/definition/25888/security-development-lifecycle-sdl

The tcpdump command is a network packet analyzer tool that can capture and display network traffic. The -w option specifies a file name to write the captured packets to, in a binary format that can be read by tcpdump or other tools later. This option is useful for capturing large amounts of network data that will be analyzed at a later time, as the question requires. The packet capture does not need to be in a format that is readable by humans, since it will be put into a binary file called “packetCapture”. The capture must be as efficient as possible, and the -w option minimizes the processing and output overhead of tcpdump, reducing the likelihood that packets will be missed.

PII (Personally Identifiable Information) is any information that can be used to identify, contact, or locate a specific individual, either by itself or when combined with other information1. PII by itself is information that can uniquely identify an individual without any additional information. Examples of PII by itself are:

• Government ID. A government ID is a number or code that is issued by a government authority to an individual for identification purposes. Examples of government IDs are social security numbers, passport numbers, driver’s license numbers, etc. A government ID can uniquely identify an individual without any additional information.
• Birth certificate. A birth certificate is a document that records the birth of an individual and contains information such as name, date of birth, place of birth, parents’ names, etc. A birth certificate can uniquely identify an individual without any additional information.

Other examples of PII by itself are biometric data, DNA profile, fingerprints, etc. Examples of information that are not PII by themselves are:

• Job title. A job title is a name or description of a position or role in an organization. A job title does not uniquely identify an individual without any additional information, as many individuals can have the same job title.
• Employment start date. An employment start date is the date when an individual began working for an organization. An employment start date does not uniquely identify an individual without any additional information, as many individuals can have the same employment start date.
• Employer address. An employer address is the location of an organization where an individual works. An employer address does not uniquely identify an individual without any additional information, as many individuals can work at the same employer address.
• Mother’s maiden name. A mother’s maiden name is the surname that a woman had before she married. A mother’s maiden name does not uniquely identify an individual without any additional information, as many individuals can have the same mother’s maiden name.

Other examples of information that are not PII by themselves are gender, race, ethnicity, age, etc.

SCAP is a protocol designed to assess the security compliance of computers and other devices. It works by scanning systems against security policies, and can help verify that the scanned device meets security requirements. Here is a link to the CompTIA CySA+ Guide's Chapter 5 - Access Controls for more information: https://certification.comptia.org/docs/default-source/exam-objectives/cs0-002.pdf